tldr;
v0.11 comes with many minor improvements, as well as some internal cleanup in core. The biggest change is that Sails core is now using Socket.io v1.
Almost none of this should affect the existing code in project, but there are a few important differences and new features to be aware of. We've listed them below.
Old v0.9 socket.io client will no longer work, so consequently you'll need to upgrade your sails.io.js client from v0.9 or v0.10 to v0.11.
To do this, just remove your sails.io.js client and install the new one. We've bundled a helper generator that will do this for you, assuming your sails.io.js client is in the conventional location at assets/js/dependencies/sails.io.js (i.e. if you haven't moved or renamed it):
sails generate sails.io.js --forcetldr;
Remove your
onConnectfunction fromconfig/sockets.js.
The onConnect lifecycle callback has been deprecated. Instead, if you need to do something when a new socket is connected, send a request from the newly-connected client to do so. The purpose of onConnect was always for optimizing performance (eliminating the need to do this initial extra round-trip with the server), yet its use can lead to confusion and race conditions. If you desperately need to eliminate the server roundtrip, you can bind a handler directly on sails.io.on('connect', function (newlyConnectedSocket){}) in your bootstrap function (config/bootstrap.js). However, note that this is discouraged. Unless you're facing true production performance issues, you should use the strategy mentioned above for your "on connection" logic (i.e. send an initial request from the client after the socket connects). Socket requests are lightweight, so this doesn't add any tangible overhead to your application, and it will help make your code more predictable.
The onDisconnect lifecycle callback has been deprecated in favor of afterDisconnect.
If you were using onDisconnect previously, you might have had to change the session, then call session.save() manually. In v0.11, this works in almost exactly the same way, except that afterDisconnect receives an additional 3rd argument: a callback function. This way, you can just call the provided callback when your afterDisconnect logic has finished, so that Sails can persist any changes you've made to the session automatically. Finally, as you might expect, you won't need to call session.save() manually anymore- it is now taken care of for you (just like req.session in a normal route, action, or policy.)
tldr; Rename your
onDisconnectfunction inconfig/sockets.jswith the following:afterDisconnect: function (session, socket, cb) { // Be sure to call the callback return cb(); }
Many of the configuration options in Socket.io v1 have changed, so you'll want to update your config/sockets.js file accordingly.
- if you haven’t customized any of the options in
config/sockets.jsfor your app, you can safely remove or comment out the entire file and let the Sails defaults do their magic. Otherwise, refer to the new Sails sockets documentation to ensure that your configuration is still valid and avoid unwanted hair loss. - if you are scaling to multiple servers in an environment that does not support sticky sessions (this includes Heroku), you'll need to set your
transportsto['websocket']in bothconfig/socket.jsand your client--see our Scaling doc for more info. - if you were using a custom
authorizationfunction to restrict socket connections, you'll now want to usebeforeConnect.authorizationwas deprecated by Socket.io v1, butbeforeConnect(which maps to theallowRequestoption from Engine.io) works just the same way. - if you were using other low-level socket configuration that was passed directly to socket.io v1, be sure and check out the reference page on sailsjs.org where all of the new configuration options are covered in detail.
The "firehose" feature for testing with sockets has been deprecated. If you don't know what that means, you have nothing to worry about. The basic usage will continue to work for a while, but it will soon be removed from core and should not be relied upon in your app. This also applies to the following methods:
- sails.sockets.subscribeToFirehose()
- sails.sockets.unsubscribeFromFirehose()
- sails.sockets.drink()
- sails.sockets.spit()
- sails.sockets.squirt()
If you want the "firehose" back, let Mike know on twitter (it can be brought back as a separate hook).
It has always been the intention that files in the Sails config folder have no precedence over each other, and that the filenames and subfolders (with the exception of local.js and the env and locale subfolders) be used merely for organization. However, in previous Sails versions, saving config files in subfolders would have the effect that the filename would be added as a key in sails.config, so that if you saved some config in config/foo/bar.js, then that config would be namespaced under sails.config.bar. This was unintentional and potentially confusing as 1) the directory name is ignored, and 2) moving the file would change the config key. This has been fixed in v0.11.x: config files in subfolders will be treated the same as those in the root config folder. If you are for some reason relying on the old behavior, you may set dontFlattenConfig to true in your .sailsrc file, but we would strongly recommend that you instead just namespace the config yourself by setting the desired key on module.exports; for example module.exports.foo = {...}. See issue #2544 for more details.
As of v0.11, Waterline now supports Bluebird (instead of q) for promises. If you are using .exec() you won't be affected-- only if you are using .then(). See balderdashy#1186 for more information.
Sails v0.11 also comes with some new stuff that we thought you'd like to know about:
Hooks can now be installed directly from NPM.
This means you can now install hooks with a single command in your terminal. For instance, consider the autoreload hook by @sgress454, which watches for changes to your backend code so you don't need to kill and re-lift the server every time you change your controllers, routes, models, etc.
To install the autoreload hook, run:
npm install sails-hook-autoreloadThis is just one example of what's possible. As you might already know, hooks are the lowest-level pluggable abstraction in Sails. They allow authors to tap into the lift process, listen for events, inject custom "shadow" routes, and, in general, take advantage of raw access to the sails runtime.
Most of the features you're familiar with in Sails have actually already been implemented as "core" hooks for over a year, including:
blueprints(which provides the blueprint API)sockets(which provides socket.io integration)grunt(which provides Grunt integration)orm(which provides integration with the Waterline ORM, and imports your projects adapters, models, etc.)http(which provides an HTTP server)- and 16 others.
You can read more about how to write your own hooks in the new and improved "Extending Sails" documentation on http://sailsjs.org.
The upgrade to Socket.io v1.0 shouldn't actually affect your app-level code, provided you are using the layer of abstraction provided by Sails itself; everything from the sails.sockets.* wrapper methods and "up" (resourceful pubsub, blueprints)
If you are using underlying socket.io methods in your apps, or are just curious about what changed in Socket.io v1.0, be sure and check out the complete Socket.io 1.0 migration guide from Guillermo and the socket.io team.
As part of the upgrade to Socket.io v1.0, we pulled out the core sockets hook into a separate repository. This allowed us to write some modular, hook-specific tests for the socket.io interpreter, which will make things easier to maintain, customize, and override.
This also allows the hook to grow at its own pace, and puts related issues in one place.
Consider this a test of the pros and cons of pulling other hooks out of the sails core repo over the next few months. This will make Sails core lighter, faster, and more extensible, with fewer core dependencies, shorter "lift" time for most apps, and faster npm installs.
In the process of pulling the sockets hook out of core, the logic which interprets requests has been normalized and is now located in Sails core. As a result, the sails.request() method is much more powerful.
This method allows you to communicate directly with the request interpreter in Sails without lifting your server onto a port. It's the same mechanism that Sails uses to map incoming messages from Socket.io to "virtual requests" that have the familiar req and res streams.
The primary use case for sails.request() is in writing faster-running unit and integration tests, but it's also handy for proxying to mounted apps (or "sub-apps").
For instance, here is an example (using mocha) of how you might test one of your app's routes:
var assert = require('assert');
var Sails = require('sails').Sails;
before(function beforeRunningAnyTests (done){
// Load the app (no need to "lift" to a port)
sails.load({
log: {
level: 'warn'
},
hooks: {
grunt: false
}
}, function whenAppIsReady(err){
if (err) return done(err);
// At this point, the `sails` global is exposed, although we
// could have disabled it above with our config overrides to
// `sails.load()`. In fact, you can actually use this technique
// to set any configuration setting you like.
return done();
});
});
after(function afterTestsFinish (done) {
sails.lower(done);
});
describe('GET /hotpockets', function (){
it('should respond with a 200 status code', function (done){
sails.request({
method: 'get',
url: '/hotpockets',
params: {
limit: 10,
sort: 'price ASC'
}
}, function (err, clientRes, body) {
if (err) return done(err);
assert.equal(clientRes.statusCode, 200);
return done();
});
});
});In v0.10.x, we added the config/env folder (thanks to @clarkorz), where you can add config files that will be loaded only in the appropriate environment (e.g. config/env/production.js for production environment, config/env/development for development, etc.). In v0.11.x we've added the ability to specify whole subfolders per-environment. For example, all config files saved to the config/env/production will be loaded and merged on top of other configuration when the environment is set to production. Note that if both a config/env/production folder and a config/env/production.js file are present, the config/env/production.js settings will take precedence. And, as always, local.js is merged on top of all other files, and .sailsrc rules them all.
As always, if you run into issues upgrading, or if any of the notes above don't make sense, let us know and we'll do what we can to clarify.
Finally, to those of you that have contributed to the project since the v0.10 release in August: we can't stress enough how much we value your continued support and encouragement. There is a pretty massive stream of issues, pull requests, documentation tweaks, and questions, but it always helps to know that we're in this together :)
Thanks.