You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I created a dashboard selection for the next course of the washing machine.
I wanted to use "Pflegeleicht" so I selected this at the dashboard.
Then I used the remote start button, now the machine is washing in cotton mode (I only can see this at the LG APP.
Also there is no sensor showing the course right now. Before the start, there was the correct course shown, but know the course state is unkown)
The text was updated successfully, but these errors were encountered:
It doesn't matter if I select a program at the machine or at the device inside of home assistant. the machine is always set to cotton. even if I select a program at the machine and then select current course at the HA integration, it's set back to cotton. Only if I select a program at the machine and then only remote start the machine with home assistant it's using the program selected at the machine. Another thing I'm curious about: machine set to remote start and after some time the machine switches to standby, I wasn't able to wake up the machine by the integration I had to use the LG app. My machine is the F4WB309Y
[Edit]
There is also no way to change the water temperature, which is possible through the LG app
[/Edit]
I created a dashboard selection for the next course of the washing machine.
I wanted to use "Pflegeleicht" so I selected this at the dashboard.
Then I used the remote start button, now the machine is washing in cotton mode (I only can see this at the LG APP.
Also there is no sensor showing the course right now. Before the start, there was the correct course shown, but know the course state is unkown)
The text was updated successfully, but these errors were encountered: