diff --git a/README.md b/README.md
new file mode 100644
index 0000000..c19e172
--- /dev/null
+++ b/README.md
@@ -0,0 +1,47 @@
+ETH(Ethereum)以太坊挖矿软件反抽水版（Linux版）
+===
+### 本软件基于最新版的Claymore内核11.9，可解决以太网络升级导致旧版本不能探矿问题 ###
+
+### 市面上第一个基于Linux的反抽水软件！ ###
+
+### 反抽水的结果大概需要1~2小时才能在矿池中看到，请耐心等待 ###
+
+本软件基于Claymore挖矿软件*v11.9*，由于改进挖矿算法，v11.9比以往版本有大概**3~5%**的速度提升。
+
+众所周知，Claymore原版及其它基于Claymore的探矿软件是会抽水的（大概1~2%）。相比原版，本版加入反抽水功能，能把劫持的算力重定向到**另一个ETH钱包地址**。市面上的反抽水软件均是重定向到同一个地址（即主钱包地址），*因而无法区别原来的算力和被劫持的算力*。
+
+## 使用方法 ##
+
+1. 修改配置文件config.txt，参数说明如下：
+ + -epool后面为矿池地址
+ + -ewal为ETH主钱包地址
+ + -eworker为矿工名，默认为计算机名，中间不能含有.
+ + -epsw参数不要改
+2. 要修改劫持回来的钱包的地址，请修改**nodevfeeWallet.txt**里的地址，可以改成和config.txt中-ewal参数一样的主钱包地址，也可以用另外的地址，劫持回来的算力将以矿工名*eth1.0*显示
+3. 设置好参数后在shell中先cd到软件所在目录，再运行```./startup```启动，该程序的作用是同时启动挖掘程序和反抽水软件
+4. 如果需要自动启动，请修改```/etc/rc.local```，内容为```cd DIR && ./startup```，其中DIR为挖矿软件所在目录。
+
+---
+
+ETH (Ethereum) Mining Software: NoDevFee Edition
+===
+### Based on the newest Claymore kernel 11.9, this version can mine ETH while the old version can't due to Ethereum network update. ###
+
+### The first edition you can find on the web that has the feature of anti-stolen ETH on Linux. ###
+
+### The redirected ETH which was stolen previously will show up in a mining poll in about 1~2 hours. Please be patient! ###
+
+This software is based on the famouse Claymore Mining software *v11.9*. Effective Ethereum mining speed is higher by 3-5% because of a completely different miner code - much less invalid and outdated shares, higher GPU load, optimized OpenCL code, optimized assembler kernels.
+
+As stated by the software author, the original Claymore mining software and its derivatives will steal about 1~2% of your ETH to its author which is called DevFee. In this edition I added a new feature: NoDevFee. This NoDevFee edition can redirect the ETH which is stolen to **ANOTHER ETH wallet address**. Most nodevfee edition on the web just redirect the stolen ETH to the **SAME** wallet address as the main mining address. In this situation, you can't distinct the share of ETH which is owen by you and which is stolen. 
+
+## Usage ##
+
+1. Change the file config.txt:
+ + -epool is the mining pool address
+ + -ewal is your main ETH wallet address
+ + -eworker is the miner's name which defaults to your computer name
+ + -epsw: do not change it
+2. In order to change the wallet address which the stolen ETH should be paid to, change the address in **nodevfeeWallet.txt**. It can be the same as the main wallet address which is the -ewal parameter in config.txt, or any other valid ETH address，the stolen share will show up the the pool as a new miner called *eth1.0*.
+3. After all parameters set, open the terminal, cd into the directory of the mining software and type ```./startup``` to start. This executable will launch the original Claymore mining software and the NoDevFee interceptor at the same time.
+4. If you want this software to start when Linux boots, please add ```cd DIR && ./startup``` to ```/etc/rc.local```，where DIR is the directory of your mining software.
diff --git a/config.txt b/config.txt
new file mode 100644
index 0000000..f185632
--- /dev/null
+++ b/config.txt
@@ -0,0 +1,5 @@
+-epool cn.sparkpool.com:3333
+-ewal 0x4F2f2F68Dc1Da7D293eE7Cd2c7555c291c92493C
+-eworker `hostname`
+-epsw x
+-mode 1
diff --git a/nodevfeeWallet.txt b/nodevfeeWallet.txt
new file mode 100644
index 0000000..76d25c7
--- /dev/null
+++ b/nodevfeeWallet.txt
@@ -0,0 +1 @@
+0x4F2f2F68Dc1Da7D293eE7Cd2c7555c291c92493C
\ No newline at end of file
diff --git a/nofee.so b/nofee.so
new file mode 100644
index 0000000..2853679
Binary files /dev/null and b/nofee.so differ
diff --git a/startup b/startup
new file mode 100644
index 0000000..3e2a279
Binary files /dev/null and b/startup differ