After HA update (via WatchTower) the alarm become armed

[rt400]

Checklist

• I am using the latest version of Alarmo (latest version can be found here)
• I checked for similar existing requests (both open and closed) before posting.

Alarmo Version

v1.10.12

HA Version

2025.10.4

Bug description

Hi.
I have automation that every morning at 06:55AM the alarm is disarmed from night mode.
My problem is that after the alarm is disarmed so the WATCHTOWER became start to and its check for updates and sometimes there is an HA update and at 07:00AM(check on every hour) HA updates and restarts, then the system returns to night mode.
I couldn't figure out why..
I would appreciate help and guidance to solve this problem.
Thanks

Steps to reproduce

check the logs after HA restart and before restart and can't find why the alarm return the night mode after restart.

Relevant log output

[nielsfaber]

Perhaps you are using MQTT to control alarmo?
If so, make sure that the information sent to alarmo on the control topic is not retained, otherwise Alarmo will read the last sent message upon startup and possibly arm the alarm.
Otherwise, I have no idea what would cause this.
You can enable debug logging for alarmo by adding this to the configuration.yaml:

logger:
  default: info
  logs:
    custom_components.alarmo: debug

This should cause a lot of information to be printed in the HA logs, also the reason why alarmo was armed after restarting.
Please share the relevant logs if you think something is wrong on the side of Alarmo.

[rt400]

i didn't used MQTT to control alarmo..
i set the HA debug log and wait to see what happen tomorrow and update you..