Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

DMX in for Fx #123

Open
kefkevm opened this issue Dec 19, 2019 · 12 comments
Open

DMX in for Fx #123

kefkevm opened this issue Dec 19, 2019 · 12 comments

Comments

@kefkevm
Copy link

kefkevm commented Dec 19, 2019

Hi,

I want to use a DMX signal from a external controler to control ws2812 leds with the FX mode of the ESP Node. How can i do this?
@emilab
Copy link

emilab commented Jan 14, 2020

Hello!!you already tried?

@kefkevm
Copy link
Author

kefkevm commented Jan 14, 2020

Yes i tried

@emilab
Copy link

emilab commented Jan 15, 2020

🙄and??

@emilab
Copy link

emilab commented Jan 16, 2020

Hello @kefkevm

@kefkevm
Copy link
Author

kefkevm commented Jan 16, 2020

It Does not work. Set the A connection to receive DMX. And B to ws2812 with 12 FX. But my leds wil not light up..

@funkmasterfrank
Copy link

funkmasterfrank commented Nov 22, 2021 •
edited
Loading

I have everything working except randomly it seems to lose connect to the other esp8266 with Wled installed. The first time it worked for 1 hour so I thought it was overheating in the case so I removed the cover and it worked for about 5 hours then it disconnected or something. Is there a sleep mode causing this issue? Any help would be appreciated? Even restarting it it doesn't connect. I'm using it as DMX in with a hardware DMX controller for the FX

@tapi35
Copy link

tapi35 commented Dec 4, 2022

Hello, Funkmasterfrank, I want to create something liké you with two wemos.
First, stairville led foot 8 DMX connected on wemos with artnetnode / wireless transmission / wemos with wled / led strip.
Have you resolved this problem ? Do you use it ? Is everything works fine ?
Thanks

@emilab
Copy link

emilab commented Dec 5, 2022 via email

@tapi35
Copy link

tapi35 commented Dec 5, 2022

I stopped working on my project since many years so I start like a newbie. I have flashed two wemos, One configurated to receive artnet with dmx out. It works great with My laptop and Qlc. The Other with Port A =>dmx in. Exactly the same connection ( TX GPIO). The XLR is in the output of my dmx pedal hardware. Normaly in qlc (plugin Artnet / Entry 192.168.1.127), I should see faders moving when I change my hardware presets ?
I don't understand what is wrong !!!!

Artnet-node-v2
Artnetnode-dmx in

If I've made a mistake, thanks a lot for your help !

@tapi35
Copy link

tapi35 commented Dec 7, 2022

If someone could help me, it will be great ! I have spent 10 hours on it and I don't know if it's problem of connection or configuration.
My wled works fine with qlc on artnet but I don't know if my ArtnetNode works !
I post screenshots and schema.....Thanks a lot

shéma connections
sync setup wled1
sync setup wled2
wifi wled
wifi
port A

@emilab
Copy link

emilab commented Dec 7, 2022 via email

@kefkevm
Copy link
Author

kefkevm commented Dec 8, 2022

I think your broadcast address should be the ip of your router or pc where Qlc is running on. I am not sure about this, you have to try it...

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
4 participants
@emilab @tapi35 @kefkevm @funkmasterfrank