BUG: Pan V3 not connecting

[richardhughes260]

Describe the bug

Thanks for all the hard work!
Everything is working fine with my 3 older cameras.

Can you do a trim on the Key ID & API Key?

Affected Bridge Version

v2.10.3

Bridge type

Docker Run/Compose

Affected Camera(s)

Pan V3

Affected Camera Firmware

4.50.5.1318

docker-compose or config (if applicable)

No response

[jdwannam]

Also unable to connect to my Pan V3: FW: 4.50.5.1318

[WyzeBridge] 🎉 Connecting to WyzeCam Pan V3 - Upstairs on 192.168.11.24
[upstairs] [-13] IOTC_ER_TIMEOUT
[WyzeBridge] ☁️ Fetching 'cameras' from the Wyze API...
[WyzeBridge] [API] Fetched [3] cameras
[WyzeBridge] 💾 Saving 'cameras' to local cache...
[WyzeBridge] 🎉 Connecting to WyzeCam Pan V3 - Upstairs on 192.168.11.24
[WyzeBridge] ⏰ Timed out connecting to Upstairs.
[upstairs] [-13] IOTC_ER_TIMEOUT
[WyzeBridge] 🎉 Connecting to WyzeCam Pan V3 - Upstairs on 192.168.11.24
[upstairs] [-13] IOTC_ER_TIMEOUT
[WyzeBridge] 🎉 Connecting to WyzeCam Pan V3 - Upstairs on 192.168.11.24
[WyzeBridge] ⏰ Timed out connecting to Upstairs.
[upstairs] [-13] IOTC_ER_TIMEOUT
[WyzeBridge] 🎉 Connecting to WyzeCam Pan V3 - Upstairs on 192.168.11.24

I rebooted the camera, re-ran the setup, deleted it from the Wyze app and re-added it back, still no luck.

[sethdonut]

Same issue here. Docker 4.31.1. Wyze v3 Pan FW: 4.50.5.1318

🚀 DOCKER-WYZE-BRIDGE v2.10.3 X86_64

[WyzeBridge] [WARN] Credentials are NOT set
[WyzeBridge] SET WB_IP to allow WEBRTC connections.

• Serving Flask app 'frontend'
• Debug mode: off
  [WyzeBridge] 📚 Using 'auth' from local cache...
  [WyzeBridge] 📚 Using 'user' from local cache...
  [WyzeBridge] [AUTH] WB_AUTH=False
  [WyzeBridge] WARNING: This is a development server. Do not use it in a production deployment. Use a production WSGI server instead.
• Running on all addresses (0.0.0.0)
• Running on http://127.0.0.1:5000
• Running on http://172.17.0.2:5000
  [WyzeBridge] Press CTRL+C to quit
  [WyzeBridge] 📚 Using 'cameras' from local cache...
  [WyzeBridge] [+] Adding Entrance Cam [HL_PAN3]
  [WyzeBridge] [MTX] starting MediaMTX 1.9.0
  [WyzeBridge] 🎬 1 stream enabled
  [WyzeBridge] 172.17.0.1 - - [24/Jan/2025 19:50:56] "GET /api/sse_status HTTP/1.1" 200 -
  [WyzeBridge] [CONTROL] SET entrance-cam state=start
  [WyzeBridge] 🎉 Connecting to WyzeCam Pan V3 - Entrance Cam on 192.168.1.26
  [WyzeBridge] 172.17.0.1 - - [24/Jan/2025 19:50:56] "GET /api/entrance-cam/start HTTP/1.1" 200 -
  [entrance-cam] [-13] IOTC_ER_TIMEOUT
  [WyzeBridge] ☁️ Fetching 'cameras' from the Wyze API...
  [WyzeBridge] [API] Fetched [1] cameras
  [WyzeBridge] 💾 Saving 'cameras' to local cache...
  [WyzeBridge] 🎉 Connecting to WyzeCam Pan V3 - Entrance Cam on 192.168.1.26
  [WyzeBridge] [entrance-cam] Snapshot timed out
  [WyzeBridge] 172.17.0.1 - - [24/Jan/2025 19:51:21] "GET /snapshot/entrance-cam.jpg?1737748266640 HTTP/1.1" 200 -
  [WyzeBridge] 172.17.0.1 - - [24/Jan/2025 19:51:21] "GET /snapshot/entrance-cam.jpg?1737748276651 HTTP/1.1" 200 -
  [WyzeBridge] 172.17.0.1 - - [24/Jan/2025 19:51:36] "GET /snapshot/entrance-cam.jpg?1737748286653 HTTP/1.1" 200 -
  [WyzeBridge] 172.17.0.1 - - [24/Jan/2025 19:51:36] "GET /snapshot/entrance-cam.jpg?1737748266640 HTTP/1.1" 304 -
  [WyzeBridge] 172.17.0.1 - - [24/Jan/2025 19:51:36] "GET /snapshot/entrance-cam.jpg?1737748276651 HTTP/1.1" 304 -
  [entrance-cam] [-13] IOTC_ER_TIMEOUT
  [WyzeBridge] 🎉 Connecting to WyzeCam Pan V3 - Entrance Cam on 192.168.1.26
  [WyzeBridge] 172.17.0.1 - - [24/Jan/2025 19:51:43] "GET / HTTP/1.1" 200 -
  [WyzeBridge] 172.17.0.1 - - [24/Jan/2025 19:51:43] "GET /img/entrance-cam.jpg HTTP/1.1" 304 -
  [WyzeBridge] 172.17.0.1 - - [24/Jan/2025 19:51:43] "GET /static/site.css HTTP/1.1" 304 -
  [WyzeBridge] 172.17.0.1 - - [24/Jan/2025 19:51:43] "GET /static/bulma.css HTTP/1.1" 304 -
  [WyzeBridge] 172.17.0.1 - - [24/Jan/2025 19:51:43] "GET /static/bulma-toast.js HTTP/1.1" 304 -
  [WyzeBridge] 172.17.0.1 - - [24/Jan/2025 19:51:43] "GET /static/site.js HTTP/1.1" 304 -
  [WyzeBridge] 172.17.0.1 - - [24/Jan/2025 19:51:43] "GET /api/sse_status HTTP/1.1" 200 -
  [WyzeBridge] 172.17.0.1 - - [24/Jan/2025 19:51:43] "GET /img/entrance-cam.jpg HTTP/1.1" 304 -
  [WyzeBridge] 172.17.0.1 - - [24/Jan/2025 19:51:43] "GET /img/entrance-cam.jpg HTTP/1.1" 304 -
  [WyzeBridge] [CONTROL] SET entrance-cam state=start
  [WyzeBridge] 172.17.0.1 - - [24/Jan/2025 19:51:43] "GET /api/entrance-cam/start HTTP/1.1" 200 -
  [WyzeBridge] [entrance-cam] Snapshot timed out
  [WyzeBridge] 172.17.0.1 - - [24/Jan/2025 19:51:51] "GET /snapshot/entrance-cam.jpg?1737748296646 HTTP/1.1" 200 -
  [WyzeBridge] 172.17.0.1 - - [24/Jan/2025 19:51:51] "GET /snapshot/entrance-cam.jpg?1737748286653 HTTP/1.1" 304 -
  [WyzeBridge] 172.17.0.1 - - [24/Jan/2025 19:51:51] "GET /snapshot/entrance-cam.jpg?1737746172935 HTTP/1.1" 304 -
  [entrance-cam] [-13] IOTC_ER_TIMEOUT
  [WyzeBridge] 🎉 Connecting to WyzeCam Pan V3 - Entrance Cam on 192.168.1.26
  [WyzeBridge] 172.17.0.1 - - [24/Jan/2025 19:52:06] "GET /snapshot/entrance-cam.jpg?1737748323643 HTTP/1.1" 200 -
  [WyzeBridge] 172.17.0.1 - - [24/Jan/2025 19:52:06] "GET /snapshot/entrance-cam.jpg?1737748313647 HTTP/1.1" 200 -
  [WyzeBridge] 🎉 Connecting to WyzeCam Pan V3 - Entrance Cam on 192.168.1.26
  [WyzeBridge] 🎉 Connecting to WyzeCam Pan V3 - Entrance Cam on 192.168.1.26
  [WyzeBridge] [entrance-cam] Snapshot timed out
  [WyzeBridge] 172.17.0.1 - - [24/Jan/2025 19:52:22] "GET /snapshot/entrance-cam.jpg?1737748323643 HTTP/1.1" 304 -
  [WyzeBridge] 172.17.0.1 - - [24/Jan/2025 19:52:22] "GET /snapshot/entrance-cam.jpg?1737748333647 HTTP/1.1" 200 -
  [entrance-cam] [-13] IOTC_ER_TIMEOUT
  [entrance-cam] [-13] IOTC_ER_TIMEOUT