RTSP Authentication Change

[RUHavingFun]

I used RTSP username and password for my streams.

        - RTSP_PATHS_ALL_READUSER=username
        - RTSP_PATHS_ALL_READPASS=password

However, now it has changed to

        - WB_AUTH=true
        - WB_USERNAME=username
        - WB_PASSWORD=password

The problem is that I thought I could then use the username and password I just set and that is not the case. It forces the 'wb' user and a generated extremely long key. This is pretty hard to use as it is effectively not typeable on mobile devices where I have the streams. I can get it to work, but it is not a very useful situation.

**** UPDATE ****
In testing I noticed RTSP Snapshots and API Thumbnails do not require authentication. Which would not be good.

[mrlt8]

hmm, snapshot and api thumb should be password protected. Can you try opening them in an incognito to see if they work?

All RTSP_ prefixes have been deprecated since v2.1 over a year ago in favor of the MTX_ prefix:
566b4a3#diff-b35d3e7824a0338e3cda0947a6cf0178076ca65121517f05a74cca1828cad2a0

[nikatbu]

Possibly related, is there something I'm missing with the 2.9.2 auth? After starting fresh, I'm prompted for my Wyze creds and API keys, all works seemingly and the bridge downloads my cameras, but then on the Web UI I'm presented with a user/password pop-up but nothing seems to work there (neither my Wyze user/password, nor the initial DEFAULT WB_PASSWORD. The docs talk about going to port 5000 initially, but no mention of any other cred requirements. Am I missing something obvious or is something borked?

[nikatbu]

For what it's worth, 2.8.3 doesn't have this issue... LMK if I'm spamming this thread and I can open up a new issue, etc. Thanks.

[RUHavingFun]

When I have this set it is what I have to use to get to the WebUI. You may want to try a private/incognito page to ensure no cached credentials problems. If you do not set it I think it will use the default user of 'wb' and the random key it generates.

    - WB_AUTH=true
    - WB_USERNAME=username
    - WB_PASSWORD=password

[nikatbu]

Ah, cool, thanks very much! I'll read the docs a bit more closely. Thanks again!

[nikconwell]

Looks like it's defaulting to "wbadmin"

docker-wyze-bridge/app/wyzebridge/config.py

Lines 63 to 67 in fb45512

	WB_USERNAME: str = (
	env_bool("WB_USERNAME", style="original")
	or env_bool("WYZE_EMAIL", style="original")
	or "wbadmin"
	)

Could also be the wyze email address but only if it's set via environment, but evidently not if it's just configured in the GUI (like I'm doing).

Thanks again for helping clear this up, much appreciated, sorry for distracting your discussion thread.

-nik

[RUHavingFun]

This still seems to be an issue. I updated my father's setup this weekend and found again we ran into getting the links from the WebUI were showing the "wb" user and password instead of the ones set in the YML. Mine still do that as well.

The snapshots do require credentials when viewed in private window, but are not in the link in the UI like they are for the others.