You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I have a USB adapter (Techkey AC1200 ID: 0bda:b812, working fine with Windows 11).
When installing it on Raspberry Pi 4, everything looks fine but there is no wireless interface.
Distros: Ubuntu Mate 64-bits
Using USB 3.0
Do you have any ideas about this issue?
piap@piap:~$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 22.04.4 LTS
Release: 22.04
Codename: jammy
piap@piap:~$ uname -a
Linux piap 5.15.0-1055-raspi #58-Ubuntu SMP PREEMPT Sat May 4 03:52:40 UTC 2024 aarch64 aarch64 aarch64 GNU/Linux
piap@piap:~$ cat /etc/modprobe.d/88x2bu.conf | grep rtw_switch_usb_mode | grep -v "#"
options 88x2bu rtw_switch_usb_mode=1 rtw_led_ctrl=1
piap@piap:~$ lsusb
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 037: ID 214b:7250 Huasheng Electronics USB2.0 HUB
Bus 001 Device 084: ID 0bda:b812 Realtek Semiconductor Corp. RTL88x2bu [AC1200 Techkey]
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
piap@piap:~$ sudo dmesg | tail -n 8
[ 438.834631] usb 1-1.1: SerialNumber: 00e04c000001
[ 443.253832] usb 1-1.1: USB disconnect, device number 86
[ 443.481579] usb 1-1.1: new high-speed USB device number 87 using xhci_hcd
[ 443.582490] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=b812, bcdDevice= 2.00
[ 443.582526] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 443.582543] usb 1-1.1: Product: 802.11ac WLAN Adapter
[ 443.582560] usb 1-1.1: Manufacturer: Realtek
[ 443.582573] usb 1-1.1: SerialNumber: 00e04c000001
piap@piap:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11 Mode:Master Tx-Power=31 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:on
piap@piap:~$ lsmod | grep 88
88x2bu 3420160 0
snd_soc_core 319488 2 vc4,snd_soc_hdmi_codec
cfg80211 966656 2 88x2bu,brcmfmac
The text was updated successfully, but these errors were encountered:
I am not seeing anything that would help solve this problem. I test this driver on a Pi4 with RasPiOS and it works well. I am not familiar with your distro.
Hi,
I have a USB adapter (Techkey AC1200 ID: 0bda:b812, working fine with Windows 11).
When installing it on Raspberry Pi 4, everything looks fine but there is no wireless interface.
Do you have any ideas about this issue?
The text was updated successfully, but these errors were encountered: