You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
reacted with thumbs up emoji reacted with thumbs down emoji reacted with laugh emoji reacted with hooray emoji reacted with confused emoji reacted with heart emoji reacted with rocket emoji reacted with eyes emoji
-
hcxdumptool capturing all packets, but with a problem.
I apologize for my English as I am using Google translator.
This is my adapter:
Every procedure I did:
1- I installed the drivers provided here:
sudo apt update && sudo apt upgrade
sudo reboot
apt install -y linux-headers-$(uname -r) build-essential bc dkms git libelf-dev rfkill iw
mkdir -p ~/src
cd ~/src
git clone https://github.com/morrownr/8814au.git
cd ~/src/8814au
sudo ./install-driver.sh
sudo reboot
2- I installed hcxdumptool:
git clone https://github.com/ZerBea/hcxdumptool.git
cd hcxdumptool
make
make install
make install PREFIX=/usr/local
hcxdumptool --version
Used version 6.3.0-27-g11375be
3- I stopped only the services and disabled the monitor-mode:
systemctl stop wpa_supplicant.service
systemctl stop NetworkManager.service
airmon-ng stop wlan1
4- With monitor-mode off, start the hcxdumptool scan:
hcxdumptool -i wlan1 -w captura.pcapng --beacontx=15 --rds=1
5- converting .pcapng to .hc22000
hcxpcapngtool -o teste1.hc22000 '/home/kali/captura.pcapng'
I have the necessary information to crack the password
6- Observations and Problem:
If you try to run step "4-" again you will notice that it will no longer be able to capture the necessary packets.
But if you stop the wlan monitor-mode again and do step "4-" again, all packets will be captured again.
Run the command below to switch to monitor-mode:
airmon-ng stop wlan1
Now execute step "4-" and you will be capturing all packets normally
Beta Was this translation helpful? Give feedback.
All reactions