cant make port forwarding

[notmegane30-arch]

my isp pubic ip is dynamic can i still make port forwarding since i've read some of the issue it need public ip that static ?

[NFS11]

yes, you can still port forward. however, given that your ip is dynamic I'd reccomend you use a ddns service to alwayd stay connected.

[NFS11]

in other words, use a ddns and you should be good to go

[notmegane30-arch]

i tried countless times to port forwarding thru different number, everytime i tested in canyouseeme.org it always says im closed to thawt port. any suggestion?

[NFS11]

@notmegane30-arch have you tried the following?:

1. make sure your port forwarding rules are set
2. open xeno and start listening on the port that you set to forward
3. only THEN should you use canyouseeme.org because it won't be able to find your forwarded port open if nothing is using it

[notmegane30-arch]

just tried. made a forwading port on my router. then made an inbound rule on the same port. then also treid listening to the port i just made. and when i use canyouseeme.org it still said close

[NFS11]

@notmegane30-arch strange, it should work given that you've told me you made an outbound rule. can you try using a different rat server (such as quasar) to listen to the port and see if its just xeno or another issue

[notmegane30-arch]

imma try and kept you updated

[notmegane30-arch]

yep tried quasar and still no connected port after i listen to the port, can it be done with tunneling and not port forwarding?

[NFS11]

@notmegane30-arch yes, tunnelling can be used as an alternative. please note, when using tunnelling you won't be able to see the following:

• ip address of client
• country of client