[Bug]: t-echo randomly powers on by itself

[31337-4554551n]

Category

Other

Hardware

T-Echo

Is this bug report about any UI component firmware like InkHUD or Meshtatic UI (MUI)?

• Meshtastic UI aka MUI colorTFT
• InkHUD ePaper
• OLED slide UI on any display

Firmware Version

2.7.15

Description

T-echo will randomly start itself without buttons being pressed.
This can happen from picking the device up and putting it down, without touching buttons.
Or even just having it sit there at arms length, it will randomly turn on.

Almost always turns itself off when the antenna is removed, so to swap antennas you'd power the device off, remove antenna, add antenna, turn it on.
But as soon as you start removing the antenna (not touching any buttons, including capacitive) it will turn itself on without an antenna in place.

Relevant log output

[b8b8]

Its hardware. They are finicky buggers.

[31337-4554551n]

Its hardware. They are finicky buggers.

Same result on 2 different echo's. Didn't happen on earlier firmware on either

[HarukiToreda]

Its hardware. They are finicky buggers.

this is occurring on all the T114 nodes I have as well, they turn on by themselves and this was not a hardware issue in the past. Started since 2.7.16