Gyroflow is a free and open source third-party application that can stabilise your video by using motion data from a gyroscope and optionally an accelerometer. Modern cameras record that data internally (such as Blackmagic, GoPro, Sony, Insta360 etc), and Gyroflow stabilises the captured footage precisely by using that data. It can also use gyro data from an external source, such as Betaflight Blackbox.
-
Gyroflow Toolbox allows you to take the stabilised data from Gyroflow and use it within Final Cut Pro as an effect, so you don't have to export a ProRes from Gyroflow!
-
-
-
+
Gyroflow Toolbox allows you to take the stabilised data from Gyroflow and use it within Final Cut Pro as an effect, so you don't have to export a ProRes from Gyroflow!
+
It's important to understand that Gyroflow and Gyroflow Toolbox are independent/seperate applications, that share the same render engine - Gyroflow Core.
To create the Gyroflow Project (that you import into Gyroflow Toolbox), you'll need to install the latest Gyroflow application.
-
You don't necessarily have to install Gyroflow on the same machine as Gyroflow Toolbox - for example, you could run Gyroflow on a fast PC, then copy the exported Gyroflow Project to your Mac to import into Gyroflow Toolbox.
-
There are also some formats, such as Sony, GoPro, DJI and Insta360 that don't require launching Gyroflow.
+
However, you don't necessarily have to install Gyroflow on the same machine as Gyroflow Toolbox - for example, you could run Gyroflow on a fast PC, then copy the exported Gyroflow Project to your Mac to import into Gyroflow Toolbox.
+
There are also some formats, such as GoPro, DJI, Insta360 (and even some Sony clips) that don't require launching Gyroflow at all, and you can stay completely within Final Cut Pro.
@@ -399,8 +408,9 @@
Limitations
-
You should always put the Gyroflow Toolbox effect on a clip inside a Compound Clip.
-
This is because you should only ever apply the Gyroflow Toolbox effect to an entire clip - the clip cannot be trimmed. Due to limitations in Final Cut Pro's FxPlug4 API - we currently can't determine the source start timecode of a clip. Because of this, the Gyroflow Toolbox effect should only be applied to a clip where the start of the clip hasn't been trimmed in the timeline (i.e. the clip you have in the timeline should show the first frame of the source clip). If you need to trim the start of this clip, you can use the full clip within a Compound Clip, then trim the Compound Clip as required. We have been in contact with the Final Cut Pro team about this, and there's currently no other better workaround or solution. Discussed in issue 8.
+
You should always put the Gyroflow Toolbox effect on a clip inside a Compound Clip.
+
This is because you should only ever apply the Gyroflow Toolbox effect to an entire clip - the clip cannot be trimmed. Due to limitations in Final Cut Pro's FxPlug4 API - we currently can't determine the source start timecode of a clip. Because of this, the Gyroflow Toolbox effect should only be applied to a clip where the start of the clip hasn't been trimmed in the timeline (i.e. the clip you have in the timeline should show the first frame of the source clip). If you need to trim the start of this clip, you can use the full clip within a Compound Clip, then trim the Compound Clip as required.
+
We have been in contact with the Final Cut Pro team about this, and there's currently no other better workaround or solution. This is discussed on GitHub and we would appreciate it if you could let Apple know this is something you'd like to see addressed. You can reference our Apple Feedback Assistant ID: FB12043900.
@@ -443,59 +453,130 @@
How To Use
-
-
-
-
-
-
-
-
important
-
This documentation is out-of-date for the v1.1.0 release and will be updated later today.
-
-
-
-
After you have installed Gyroflow and Gyroflow Toolbox, you'll see a Gyroflow Toolbox Effect in the Effects Browser.
+
If you haven't already, follow the installation instructions here first.
+
After you have installed Gyroflow and Gyroflow Toolbox, you'll see a Gyroflow Toolbox Effect in the Effects Browser:
You can then apply this effect to any clips that are supported by Gyroflow.
-
From the Inspector you can then click Launch Gyroflow, to open the Gyroflow application.
+
+
+
+ #
+ Applying the Effect
+
+
+
You should always put the Gyroflow Toolbox effect on a clip inside a Compound Clip (see limitations above).
+
It will then look like this:
-
Because Gyroflow Toolbox has no knowledge of the clip it's been applied to, we can't automatically load the video clip into Gyroflow, so you'll need to manually import it by either dragging the file in, or clicking the Open File button.
+
+
+
+ #
+ Importing Gyroflow Project
+
+
+
If you have a pre-existing Gyroflow Project, there's a few different ways you can import a Gyroflow Project:
+
+
Drag & Drop from Finder
+
Drag & Drop from another application (such as an Asset Management Tool)
+
Press the Import Gyroflow Project
+
Press the Import Last Gyroflow Project
+
+
If you have a Gyroflow Project with the same filename sitting next to the Media File, Gyroflow Toolbox will always try and load that Gyroflow Project.
+
+
+
+ #
+ Importing Media File
+
+
+
If you don't already have a Gyroflow Project for a media file, there's a few different ways you can import a media file:
+
+
Drag & Drop from Final Cut Pro Browser
+
Drag & Drop from another application (such as an Asset Management Tool)
+
Drag & Drop from Finder
+
Press the Import Media File button
+
+
If you drag-and-drop from the Final Cut Pro Browser you will be prompted to select the video file you imported (due to macOS's sandboxing).
+
If there's a Gyroflow Project next to the Media File with the exact same filename, Gyroflow Toolbox will try to load that file instead.
+
GoPro, DJI, Insta360 and some Sony files will automatically synchronise (as the gyroscope data is within the media file), so then you'll be presented with:
+
+
+
+
+
+
If the Media File requires synchronising in the hero Gyroflow application, Gyroflow Toolbox will launch the Media File in Gyroflow.
+
If the Media File requires manually loading a Lens Profile, Gyroflow Toolbox will prompt to allow you to select a Lens Profile from the built-in collection within Gyroflow.
+
+
+
+ #
+ Gyroflow Parameters
+
+
+
Once you've imported a Media File or Gyroflow Project you can then use the Gyroflow Parameters to customise things.
+
All of the parameters are keyframe-able, however...
+
Any keyframes created in Gyroflow will take priority over the keyframes in Final Cut Pro.
-
+
-
Gyroflow Toolbox also has some limitations with certain footage - for example, currently with the RED Komodo, you'll need to transcode the footage to ProRes, load the ProRes in Gyroflow then load your original .R3D in the Motion data section of Gyroflow.
-
Lens profile and Motion data files are automatically detected for some cameras (such as GoPro's). Otherwise search for the correct lens profile and open the Motion data file.
-
You should play the video to check if additional synchronisation is required. If so, right-click on the timeline and select Auto sync here at at least two points of the video where some motion is present. This synchronises the gyro data and the video.
-
You can also experiment with the stabilisation options and algorithms. They all give different "looks" for the final result.
The Gyroflow Discord is also very active and a great way to get fast support.
-
Once you have finished stabilising in Gyroflow you should click the Export button arrow and then Export project file (including processed gyro data).
-
It's important that you include the processed gyro data, otherwise none of the stabilisation will come across to Gyroflow Toolbox, and you'll get an error message when attempting to import it.
+
Input Rotation is when Final Cut Pro rotates the input pixels before feeding to Gyroflow Toolbox.
+
For example, if an .mp4 contains rotation in the metadata, Final Cut Pro may automatically rotate it. Gyroflow expects raw pixels directly from the source file, so if Final Cut Pro has already rotated them, it won't match.
+
Given this, the Input Rotation is the rotation done by the host BEFORE feeding to Gyroflow Toolbox, whereas Video Rotation is a rotation by the Gyroflow engine AFTER stabilisation.
+
+
+
+ #
+ Tools
+
+
+
There are also some handy tools:
+
+
+
+
+
+
+
+ #
+ Stabilisation Overview
+
+
+
This allow you to zoom out the view to see the stabilization results. This is very useful to see if and how Gyroflow is working. You should disable this before rendering.
+
+
+ #
+ Disable Gyroflow Stretch
+
+
+
If you used Input stretch in the lens profile in Gyroflow, and you de-stretched the video separately in Resolve, check this to disable Gyroflow's internal stretching.
+
+
+
+ #
+ File Management
+
+
+
At the bottom of the Effect is in the Inspector is some File Management tools:
-
+
-
You can now press the Import Project button in the Final Cut Pro Inspector to import it.
-
The data from the Gyroflow Project gets saved within the Final Cut Pro library. If you want to reload it, you can either re-import, or if the file is in the same path, you can press Reload Project.
-
You can adjust and keyframe the FOV, Smoothness and Lens Correction within Final Cut Pro.
+
Reload Gyroflow Project allows you to reload the contents of a Gyroflow Project if you've modified it externally (i.e. in the Gyroflow application).
+
Launch Gyroflow is handy for opening the hero Gyroflow application. If you have a Gyroflow Project or Media File already loaded, it will open that file.
+
Export Gyroflow Project is handy if you imported a GoPro, DJI or Insta360 clip (that didn't require synchronising in the hero Gyroflow application), and you need to export a Gyroflow Project for sharing or editing.
+
Reveal in Finder reveals the Gyroflow Project in Finder.
+
Settings allows you to enable/disable some of the helper alerts/popups throughout the application, Show Log Files in Finder, and Reset All Settings (which is only really used for debugging/development).
diff --git a/index.html b/index.html
index 94762d82..51cec8f1 100644
--- a/index.html
+++ b/index.html
@@ -3,7 +3,7 @@
-
+
@@ -33,11 +33,11 @@
-
+
-
+
-
+
diff --git a/installation/index.html b/installation/index.html
index a8a9f146..6064de5d 100644
--- a/installation/index.html
+++ b/installation/index.html
@@ -3,7 +3,7 @@
-
+
@@ -33,11 +33,11 @@
-
+
-
+
-
+
diff --git a/latenite-technology/index.html b/latenite-technology/index.html
index 8f38d426..ddc07c66 100644
--- a/latenite-technology/index.html
+++ b/latenite-technology/index.html
@@ -3,7 +3,7 @@
-
+
@@ -33,11 +33,11 @@
-
+
-
+
-
+
diff --git a/license/index.html b/license/index.html
index 4aa5eef6..2c4580bb 100644
--- a/license/index.html
+++ b/license/index.html
@@ -3,7 +3,7 @@
-
+
@@ -33,11 +33,11 @@
-
+
-
+
-
+
diff --git a/privacy/index.html b/privacy/index.html
index fe8498a1..17927719 100644
--- a/privacy/index.html
+++ b/privacy/index.html
@@ -3,7 +3,7 @@
-
+
@@ -33,11 +33,11 @@
-
+
-
+
-
+
diff --git a/release-notes/index.html b/release-notes/index.html
index 1c3450db..b5adb26d 100644
--- a/release-notes/index.html
+++ b/release-notes/index.html
@@ -3,7 +3,7 @@
-
+
@@ -33,11 +33,11 @@
-
+
-
+
-
+
diff --git a/resources/js/config.js b/resources/js/config.js
index 08cc9471..87438e87 100644
--- a/resources/js/config.js
+++ b/resources/js/config.js
@@ -1 +1 @@
-var __DOCS_CONFIG__ = {"id":"/0S1cwkBNH5fRxLKbtxtdA68NaQAQA2Tuz","key":"5uyetYUqF/kywOC+LsZc0Y6c3V9ODcW8fBxuoM/URLk.jQBQqV1M2SFG4XtKyKZxmQNf6g6qrtdEaKonWUowrApjbQXsgN0+Yp7aqOBFuhZaYioO+c2/o40mC1qA8E9+dg.308287","base":"/","host":"gyroflowtoolbox.io","version":"1.0.0","useRelativePaths":true,"documentName":"index.html","appendDocumentName":false,"trailingSlash":true,"preloadSearch":false,"cacheBustingToken":"3.1.0.744421167562","cacheBustingStrategy":"query","sidebarFilterPlaceholder":"Filter","toolbarFilterPlaceholder":"Filter","showSidebarFilter":true,"filterNotFoundMsg":"No member names found containing the query \"{query}\"","maxHistoryItems":15,"homeIcon":"","access":[{"value":"public","label":"Public"},{"value":"protected","label":"Protected"}],"toolbarLinks":[{"id":"fields","label":"Fields"},{"id":"properties","label":"Properties"},{"id":"methods","label":"Methods"},{"id":"events","label":"Events"}],"sidebar":[{"n":"/","l":"Introduction","s":""},{"n":"latenite-technology","l":"LateNite Technology","s":""},{"n":"buy","l":"Buy on Mac App Store","s":""},{"n":"educational","l":"Educational Pricing","s":""},{"n":"installation","l":"Installation","s":""},{"n":"how-to-use","l":"How To Use","s":""},{"n":"support","l":"Support","s":""},{"n":"release-notes","l":"Release Notes","s":""},{"n":"credits","l":"Credits","s":""},{"n":"privacy","l":"Privacy Policy","s":""},{"n":"license","l":"License","s":""}],"search":{"mode":0,"minChars":2,"maxResults":20,"placeholder":"Search","hotkeys":["k"],"noResultsFoundMsg":"Sorry, no results found.","recognizeLanguages":true,"languages":[0],"preload":false},"resources":{"History_Title_Label":"History","History_ClearLink_Label":"Clear","History_NoHistory_Label":"No history items","API_AccessFilter_Label":"Access","API_ParameterSection_Label":"PARAMETERS","API_SignatureSection_Label":"SIGNATURE","API_CopyHint_Label":"Copy","API_CopyNameHint_Label":"Copy name","API_CopyLinkHint_Label":"Copy link","API_CopiedAckHint_Label":"Copied!","API_MoreOverloads_Label":"more","API_MoreDropdownItems_Label":"More","API_OptionalParameter_Label":"optional","API_DefaultParameterValue_Label":"Default value","API_InheritedFilter_Label":"Inherited","Search_Input_Placeholder":"Search","Toc_Contents_Label":"Contents","Toc_RelatedClasses_Label":"Related Classes","History_JustNowTime_Label":"just now","History_AgoTime_Label":"ago","History_YearTime_Label":"y","History_MonthTime_Label":"mo","History_DayTime_Label":"d","History_HourTime_Label":"h","History_MinuteTime_Label":"m","History_SecondTime_Label":"s"}};
+var __DOCS_CONFIG__ = {"id":"5u9mBzxjc68huWQHoiqIUO0P2LNoQgdAqT","key":"zJuBg0Xp1EVkGKpkjDwq15o6cMd+aKSTsO22mQWG3dA.TVh4oWfuchEqPa/a+X0TmiGIjVRuAP8YVrvciNGN8jxLyPaIfvvrb7TK8A/H+D5e5TvW3Xu1dSwi2TsAZu5b0A.308233","base":"/","host":"gyroflowtoolbox.io","version":"1.0.0","useRelativePaths":true,"documentName":"index.html","appendDocumentName":false,"trailingSlash":true,"preloadSearch":false,"cacheBustingToken":"3.1.0.744429366690","cacheBustingStrategy":"query","sidebarFilterPlaceholder":"Filter","toolbarFilterPlaceholder":"Filter","showSidebarFilter":true,"filterNotFoundMsg":"No member names found containing the query \"{query}\"","maxHistoryItems":15,"homeIcon":"","access":[{"value":"public","label":"Public"},{"value":"protected","label":"Protected"}],"toolbarLinks":[{"id":"fields","label":"Fields"},{"id":"properties","label":"Properties"},{"id":"methods","label":"Methods"},{"id":"events","label":"Events"}],"sidebar":[{"n":"/","l":"Introduction","s":""},{"n":"latenite-technology","l":"LateNite Technology","s":""},{"n":"buy","l":"Buy on Mac App Store","s":""},{"n":"educational","l":"Educational Pricing","s":""},{"n":"installation","l":"Installation","s":""},{"n":"how-to-use","l":"How To Use","s":""},{"n":"support","l":"Support","s":""},{"n":"release-notes","l":"Release Notes","s":""},{"n":"credits","l":"Credits","s":""},{"n":"privacy","l":"Privacy Policy","s":""},{"n":"license","l":"License","s":""}],"search":{"mode":0,"minChars":2,"maxResults":20,"placeholder":"Search","hotkeys":["k"],"noResultsFoundMsg":"Sorry, no results found.","recognizeLanguages":true,"languages":[0],"preload":false},"resources":{"History_Title_Label":"History","History_ClearLink_Label":"Clear","History_NoHistory_Label":"No history items","API_AccessFilter_Label":"Access","API_ParameterSection_Label":"PARAMETERS","API_SignatureSection_Label":"SIGNATURE","API_CopyHint_Label":"Copy","API_CopyNameHint_Label":"Copy name","API_CopyLinkHint_Label":"Copy link","API_CopiedAckHint_Label":"Copied!","API_MoreOverloads_Label":"more","API_MoreDropdownItems_Label":"More","API_OptionalParameter_Label":"optional","API_DefaultParameterValue_Label":"Default value","API_InheritedFilter_Label":"Inherited","Search_Input_Placeholder":"Search","Toc_Contents_Label":"Contents","Toc_RelatedClasses_Label":"Related Classes","History_JustNowTime_Label":"just now","History_AgoTime_Label":"ago","History_YearTime_Label":"y","History_MonthTime_Label":"mo","History_DayTime_Label":"d","History_HourTime_Label":"h","History_MinuteTime_Label":"m","History_SecondTime_Label":"s"}};
diff --git a/resources/js/search.json b/resources/js/search.json
index a0bd3855..c3dec38e 100644
--- a/resources/js/search.json
+++ b/resources/js/search.json
@@ -1 +1 @@
-[[{"l":"Gyroflow Toolbox","p":["Allows you to import Gyroflow Projects into Apple's Final Cut Pro.","Advanced gyro-based video stabilisation without the round-tripping!","You can even use this in conjunction with BRAW Toolbox(also on the App Store), to stabilise Blackmagic RAW files!","To get started, simply drop your video clip from the Final Cut Pro Browser or Finder to the drop zone in the Final Cut Pro Inspector. You can also drop a Gyroflow Project.","Sony, GoPro (Hero 8+), DJI, Blackmagic RAW and Insta360 will be automatically synced when imported. Other cameras, such as RED, will require launching Gyroflow to synchronise.","GoPro, DJI and Insta360 will automatically select a Lens Profile. For all other cameras, you may need to manually select a Lens Profile, however, we'll try and GUESS a good match."]},{"i":"what-is-gyroflow","l":"What is Gyroflow?","p":["Gyroflow is a free and open source third-party application that can stabilise your video by using motion data from a gyroscope and optionally an accelerometer. Modern cameras record that data internally (such as Blackmagic, GoPro, Sony, Insta360 etc), and Gyroflow stabilises the captured footage precisely by using that data. It can also use gyro data from an external source, such as Betaflight Blackbox.","Gyroflow Toolbox allows you to take the stabilised data from Gyroflow and use it within Final Cut Pro as an effect, so you don't have to export a ProRes from Gyroflow!","You can watch a great Gyroflow Tutorial here."]}],[{"l":"LateNite Technology","p":["This website has been thrown together by Chris Hocking at LateNite.","Constantly looking for ways to innovate, LateNite is as passionate about production and post production as it is storytelling. Their pursuit of creative excellence has seen them work closely with global cinematic technology companies to craft post workflow solutions and critically celebrated software in-house."]},{"l":"In Development","p":["Here's a sneak peak of some of the things we have in development.","Exact shipping dates may vary, as all these ideas are still in active development, and subject to things like TestFlight & App Store approval, etc."]},{"l":"Timecode Toolbox","p":["ETA: July 2023","We're spinning out the Sony Timecode Repair Toolbox from CommandPost and making it a standalone app.","In addition to the current functionality, you'll also be able to modify the original camera files to add Final Cut Pro friendly timecode."]},{"l":"Metadata Toolbox","p":["ETA: August 2023","Metadata Toolbox is a Workflow Extension that allows you to drag in a project, select burn-in metadata options, then drag a Compound Clip back to the timeline with all the metadata as titles."]},{"l":"RAW Toolbox","p":["ETA: September 2023","Following in the footsteps of BRAW Toolbox, RAW Toolbox will initially add Nikon N-RAW support to Final Cut Pro."]},{"l":"Import Toolbox","p":["ETA: October 2023","Import Toolbox will be a Workflow Extension that allows you to import files with better metadata and preset controls (i.e. clip volume).","We will also be spinning out the Watch Folders from CommandPost and moving them into this app."]},{"l":"Assistant Toolbox","p":["ETA: November 2023","Assistant Toolbox will be a Workflow Extension that spins out Titles to Keywords and Auto Sequence from CommandPost.","It'll include various improvements and enhancements to make the job even easier for Assistant Editors working on long-form feature film projects."]},{"l":"Magic Toolbox","p":["ETA: December 2023","Magic Toolbox is our first Machine Learning experiment.","You'll be able to add titles to the timeline, to trigger Machine Learning actions such as:","SUBTITLES- Analyses the audio and adds subtitles","NARRATION- Turns text into speech in a narration tone","VOICE- Turns text into speech based on your description","GRADE- Adds Color Effects based on your description","MUSIC- Adds stock music or machine learning generated music based on your description","SFX- Adds sound effects from places like FreeSound.org","VIDEO- Adds machine learning generated video based on your description","Magic Toolbox will use existing services like ChatGPT and ElevenLabs- and it'll be BYO API Key."]},{"l":"TestFlight","p":["Here's some of our projects still in active development, awaiting Mac App Store approval:"]},{"l":"Recall Toolbox","p":["Recall Toolbox is a Final Cut Pro Workflow Extension that acts as a Shared Pasteboard.","Anything that you can copy and paste in Final Cut Pro, Recall Toolbox can store."]},{"l":"Build for Final Cut Pro","p":["There are third party tools like the amazing Copy 'Em (for Mac), but they're not quite as visual as Recall Toolbox, and they're not built from the ground up for Final Cut Pro users.","Recall Toolbox works as a Final Cut Pro Workflow Extension, so it's window position gets saved with your custom Workspaces.","Whilst CommandPost has had a Shared Pasteboard & Pasteboard Buffers for years, it's really optimised for Control Surfaces. You can access the Shared Pasteboard from the CommandPost menubar, and it is super powerful, but it's not as visual - you just get text, not a fully customisable thumbnail.","Recall Toolbox feels like a natural extension to Final Cut Pro, with a similar look and feel to Final Cut Pro's Effects Browser."]},{"l":"iCloud Sync","p":["Recall Toolbox automatically syncs to ALL your devices on the same iCloud account automagically!"]},{"l":"iCloud Sharing","p":["You can share folders with other iCloud users, and control permissions. For example, you could have a \"read only\" folder that contains client logos for a current job!"]},{"l":"Free Apps","p":["Here's some of our free tools used by professional editors worldwide:"]},{"l":"CommandPost","p":["CommandPost is a free and open source macOS application that bridges between control surfaces and software that doesn’t support them natively, such as Apple’s Final Cut Pro and Adobe’s After Effects.","It’s been downloaded over 163 thousand times, and there are over 2.6 thousands members in our Facebook Community.","It’s been translated into Arabic, Bengali, Catalan, Chinese (Simplified & Traditional), Danish, Dutch, French, German, Greek, Hindi, Hungarian, Italian, Japanese, Korean, Malayalam, Norwegian, Panjabi/Punjabi, Polish, Portuguese, Russian, Spanish, Swedish, Ukrainian & Vietnamese by our awesome community.","It’s used by filmmakers, developers, scientists and macOS power users all over the world to seriously speed up mundane tasks through powerful and customisable automation tools.","For example, you can apply individual effects within Final Cut Pro or After Effects with the single tap of a button.","Powered by Lua(the same scripting language used by Blackmagic Fusion, Adobe Lightroom and even parts of Apple iOS), it's insanely customisable and powerful.","It runs natively on Apple Silicon and is fully compatible with Hammerspoon.","You can listen to Chris explain CommandPost on Final Cut Pro Radio Episode #57 and Episode #43."]},{"l":"User Quotes","p":["“ Titles to Keywords is a huge timesaver when editing complex scenes. Couldn’t live without it anymore. And directors love that every delivery of any line from any take is just one click away! ” Knut Hake- Editor on Netflix's Blood Red Sky","“ CommandPost and FCP are so intertwined on my day to day that I see them as one app! ” Marcos Castiel BFE- Editor on Netflix's Turn of the Tide","“ Command Post started as a FCPX utility but it goes further than that. You can use it to map almost any function to supported hardware devices to work with any app like a BMD Speed Editor and Avid Media Composer! ” Marc Bach- Editor & Colourist","“ Chris's support is the best you will find anywhere on the planet. He was proactive and able to implement features for me on the spot. 5 STAR product 5 STAR support. ControllerMate is what I used to use. CommandPost is faster and easier. ” Ross Batten- Senior Sound Designer (ProTools)","“ Search Console is like Spotlight on steroids. It can quickly find and execute any obscure command, NLE and OS-wide, fire up keyboard makros (scripts), and especially, find and place Effects and Effect Templates, directly onto selected clips in my FCP timeline. It constantly saves me clicks. ” Florian Duffe- Editor","“ CommandPost is so many things for so many people. For me it is a Final Cut Pro automation system that unlocks hidden features and uniquely supports advanced workflows. CommandPost’s secret weapon? Deep connections with the postproduction community which mean that it constantly improves as the needs of editors and post professionals evolve. ” Alex ‘4D’ Gollner- Motion Template Creator","“ Chris, you have no idea how helpful your Titles to Keywords toolbox has been on our latest production. Without the toolbox these 2-3 hour long timelines (around 900 keywords) would have been nearly impossible to tag with the FCP built in way. It's very long scenes with around 50 lines of text for all characters. ” Sam Pluemacher- Assistant Editor on Netflix's Blood Red Sky","“ As someone who doesn’t like clicking to do things, CommandPost makes my work much more likeable! ” Oli Frost- Editor","“ CommandPost supports my Loupedeck, Stream Deck and Razer devices with advanced Final Cut Pro integrations. Eliminating the need for multiple apps and reducing complexity. ” Sam Pluemacher- Assistant Editor on Netflix's Blood Red Sky","“ CommandPost is the first thing you should install If you like to tinker. This genius app extends Final Cut Pro in all kinds of ways, enabling advanced workflows, automation, and even integration with external hardware such as MIDI controllers. Recommended. ” Iain Anderson- Author of Final Cut Pro Efficient Editing"]},{"l":"Transfer Toolbox","p":["Transfer Toolbox allows you to convert Final Cut Pro (for Mac) libraries into Final Cut Pro (for iPad) projects!","You can now easily get from your Desktop to your iPad! Simply drag your existing Final Cut Pro library into the application's drop zone.","You should ensure your library only has a single event, and all project timecode starts at 00:00:00:00.","All Motion Content and Media should be contained within the Library.","If you have custom fonts on the Mac Final Cut Pro library, you should manually install them on the iPad before importing the project.","Transfer Toolbox requires Final Cut Pro 10.6.6 or later."]},{"l":"App Store","p":["Here's some of our products currently for sale on the Mac App Store:"]},{"l":"BRAW Toolbox","p":["BRAW Toolbox allows you to import Blackmagic RAW files directly into Final Cut Pro without transcoding.","No more waiting. No more transcoding. No more massive ProRes files.","Save hours of time, and terabytes of storage!","The BRAW Toolbox Workflow Extension allows you to prepare all of your footage prior to import. You can easily and quickly change all the RAW parameters, and copy and paste settings from different BRAW clips. You can even save and restore Presets that contain specific parameters, saving time for example, if you always use the same Gamut & Gamma.","Once imported into Final Cut Pro, you can still modify the RAW parameters at any time.","You can even keyframe the ISO, Exposure, Color Temp, Tint and Custom Gamma Controls!","BRAW Toolbox comes with a Metadata View that allows you to view every piece of BRAW Metadata directly within the Final Cut Pro Inspector.","There are automatic Decode Quality options for both HD and UltraHD projects, and you can also work at a low Decode Quality, then apply a \"Global Setting\" to force Full Quality prior to exporting - meaning you never have to worry about creating proxies for performance. BRAW Toolbox gives you complete freedom and flexibility.","You can also use the Workflow Extension to send your project/timeline to DaVinci Resolve for grading - all using BRAW files directly from the camera!","BRAW Toolbox requires Final Cut Pro 10.6.5 or later."]},{"l":"User Reviews","p":["This developer did what Apple Couldn't/Wouldn't This app is a great solution to a common problem Final Cut Pro users have: getting Blackmagic Raw footage into the app. At first it might seem like a bizarre workaround, but you only have to go through the process of setting it up once, and then you can easily import your Blackmagic footage right into FCP. Honestly, from that point on it works so incredibly well that I really struggle to understand why Apple has made it so difficult. Except it's not difficult, not anymore. This is great software: a small developer solving a problem that a big one (Apple) can't. That's innovation, my friends.","moosefuel – Feb 3, 2023 (Apple App Store Review)","The tool we have dreamed of is here. For lovers of Final Cut Pro who have struggled with the endless BRAW proxy XML loop, this is a dream come true. BRAW natively inside Final Cut. Controls for RAW adjustments at your fingertips. Is it the full Resolve interface? No, doesnt need to be, Between BRAW ToolBox and FCP, most edits can be done natively without ever having the leave the Final Cut NLE. If you shoot any BRAW camera, this is the best of both worlds if you live in the FCP ecosystem. Thank you latenightfilms team for this, its a huge step forward and a wonderful plugin.","Chasing Photography – May 16, 2023 (Apple App Store Review)","Perfect! Just perfect.","Viaswage – Feb 18, 2023 (Apple App Store Review)","Great! Love this! thank you!","NarimanGafurov – Feb 6, 2023 (Apple App Store Review)","UMMMMMM THANK YOU, YOU'RE A GENIUS I've needed this for years!!!!!! You are a genius and this is incredible!!! Thank you so much!!! No clue how BM never made this.","gordonfromvan – Feb 4, 2023 (Apple App Store Review)","I've been waiting for this! I can finally use my two Blackmagic cameras and shoot in BRAW. As a Final Cut Pro editor, I'm really excited. The app is working great! I really appreciate the team at LateNite for all the hard work it took to get this up and running. Well worth the money to be able to handle BRAW seamlessly. Scott_Hartman – Feb 2, 2023 (Apple App Store Review)","Boom! Such an amazing plugin and works fantastic! Grant Digital Sky – Feb 2, 2023 (Apple App Store Review)","Absolutely Amazing. Solves a massive problem and works beautifully! Jmurphy8503 – Jan 31, 2023 (Apple App Store Review)","The impossible made possible. Amazing to work natively with BRAW in my favourite editor. Thank you! MadMitch1993 – Jan 30, 2023 (Apple App Store Review)"]},{"l":"Gyroflow Toolbox","p":["Gyroflow Toolbox allows you to import Gyroflow Projects into Final Cut Pro.","Gyroflow is a free and open source third-party application that can stabilise your video by using motion data from a gyroscope and optionally an accelerometer. Modern cameras record that data internally (GoPro, Sony, Insta360 etc), and Gyroflow stabilizes the captured footage precisely by using them. It can also use gyro data from an external source (eg. from Betaflight blackbox).","Gyroflow Toolbox allows you to take the stabilised data from Gyroflow and use it within Final Cut Pro as an effect, so you don't have to export a ProRes from Gyroflow!","You can even use this in conjunction with BRAW Toolbox (also on the App Store), to stabilise Blackmagic RAW files!","None of this would be possible without the incredible Gyroflow project and the incredibly help and support from their main developer, AdrianEddy."]},{"i":"user-reviews-1","l":"User Reviews","p":["Nice product! Thank you Chris!","NarimanGafurov – Feb 6, 2023 (Apple App Store Review)","The Best Way to Stabilize Pro Res RAW I record both internally and externally with an Atomos Ninja, on my FX3 with the end goal of delivering HDR. I record internal to capture Gyroscopic data that my FX3 records. This allows me to Use GryoFlow, and Thus GryoFlow Toolbox to stabilize Pro Res RAW footage. This tool has made it possible, and works awesomely. I highly recommend this tool it will help immensely.","Tydar94 – Jan 27, 2023 (Apple App Store Review)"]},{"l":"Marker Toolbox","p":["Marker Toolbox allows you to import Vimeo CSV, Wipster CSV, Dropbox Replay JSON & Email Comments into Apple's Final Cut Pro via a handy Workflow Extension.","You can also OPTIONALLY use OpenAI's ChatGPT to help translate email comments into markers using your own personal OpenAI API key!","If you use Vimeo Review pages or Wipster to share video edits with clients to consolidate feedback, you can simply export a CSV file from Vimeo or Wipster, and drag it into the Workflow Extension to convert the comments into Markers within Final Cut Pro. It's fast and easy!","Dropbox Replay works exactly the same way, except Marker Toolbox will also import any drawn annotations!","Similar to Frame.io's Workflow Extension, the markers come in as a Compound Clip, that you can then \"break apart\" so that the markers are attached to the clips in your Primary Storyline, meaning that your clients comments stay in the correct position as you make revisions to the edit. For each marker, there's also a title, so that you can easily visually see the comments right in your Viewer - this is great if you need to export an edit with all your client feedback \"burnt\" into the export.","Replies and the date the comment was added can be included in the Marker names. It also takes \"resolved\" comments in Vimeo, Wipster & Dropbox Replay, and marks them as \"completed\" in Final Cut Pro!","You can also easily copy and paste client feedback from emails into the Workflow Extension. In most cases, you can use the \"Process Comments Locally\" button to use a custom-built algorithm that converts each line of text into a comment. However, you can also the power of OpenAI's ChatGPT to help translate more complicated feedback into markers. You can customise the ChatGPT prompt, and also pick the ChatGPT Model. You supply your own OpenAI API key, giving you full control.","This can be a MASSIVE time saver, as you can simply copy and paste a long list of email comments, and ChatGPT will do the work to convert them into easy-to-read Final Cut Pro markers, that you can then easily navigate via the Timeline Index.","Marker Toolbox requires Final Cut Pro 10.6.5 or later."]},{"i":"user-reviews-2","l":"User Reviews","p":["I’ve been absolutely flatout while working in Thailand. Wipsters has been been great, helping me manage projects and reviewers across four countries. Stoked Marker Toolbox can send Wipster notes straight into #fcpx","Alister Robbie via Twitter","Excellent addition to FCP This is a great tool. I have my clients make notes on Vimeo, and Marker Toolbox lets me download a .csv of those comments and create markers on the FCP project/timeline at the proper locations, with notes visible and that will follow the clips as I move them. Once downloaded and installed it's easy. Downloading the .csv and running it through Marker Toolbox and adding the Markers to the project/timeline takes less than a minute, then you're ready to go. Really great find!","Robert heinlein's son – May 31, 2023 (Apple App Store Review)","Amazing simple I wanted an app like this since I started editing. Now for the first time I can process the comments I get via an e-mail on an edit from the start and not, as I usualy do, begin at the end of the edit and work backwards.","Blazy – Apr 6, 2023 (Apple App Store Review)"]}],[{"l":"Buy on Mac App Store","p":["Gyroflow Toolbox is a one-time payment of 9.99.","This is generally 9.99 in your local currency (i.e. AUD9.99, USD9.99, CAD9.99).","However, if your country doesn't have an equivalent of 9.99 (i.e. Rp 169,000 in Indonesia), it will default to a USD$9.99 equivalent(calculated by Apple).","There is currently no free trial, and it is only be available on the Mac App Store as a one-time payment.","Alternatively, as Gyroflow Toolbox is open source, you can also build it yourself via GitHub.","You can find information about Educational Pricing here."]},{"l":"Previous Versions","p":["The initial public release of Gyroflow Toolbox v1.0.0 was USD$4.99.","We then later tweaked the pricing to make it 9.99 in your local currency (i.e. AUD9.99, USD9.99, CAD9.99).","With the release of Gyroflow Toolbox v1.1.0, we increased the price to 9.99 to cover development costs.","We may increase the price in the future, depending on the development time required and the amount of users."]}],[{"l":"Educational Pricing","p":["Educational institutions can get a 50% discount when they purchase 20 or more copies through Apple School Manager.","Please contact Apple if you need help with Educational Pricing."]}],[{"l":"Installation","p":["Gyroflow Toolbox allows you to take the stabilised data from Gyroflow and use it within Final Cut Pro as an effect.","You can purchase the latest Gyroflow Toolbox release on the Mac App Store.","You can download the latest Gyroflow release for free from the Gyroflow website.","Please install the latest Gyroflow first. You can learn more about installing Gyroflow here."]},{"l":"Installing Gyroflow Toolbox","p":["If it's the first time installing the software, or if there's been an update, you'll be prompted to Install Motion Template.","Once you click the button, you'll be prompted to grant permission to your Movies folder. This is due to macOS's sandboxing, and you'll only need to do this once. Click OK.","You then need to click Grant Access:","Once done, you'll be presented with a successful message:","The button will now be disabled, and will say Motion Template Installed. You can now close the Gyroflow Toolbox application.","Now that you have Gyroflow Toolbox installed, you can learn how to use it."]}],[{"l":"How To Use"},{"i":"what-is-gyroflow","l":"What is Gyroflow?","p":["Gyroflow is a free and open source third-party application that can stabilise your video by using motion data from a gyroscope and optionally an accelerometer. Modern cameras record that data internally (such as Blackmagic, GoPro, Sony, Insta360 etc), and Gyroflow stabilises the captured footage precisely by using that data. It can also use gyro data from an external source, such as Betaflight Blackbox.","Gyroflow Toolbox allows you to take the stabilised data from Gyroflow and use it within Final Cut Pro as an effect, so you don't have to export a ProRes from Gyroflow!"]},{"l":"Prerequisites","p":["To create the Gyroflow Project (that you import into Gyroflow Toolbox), you'll need to install the latest Gyroflow application.","You don't necessarily have to install Gyroflow on the same machine as Gyroflow Toolbox - for example, you could run Gyroflow on a fast PC, then copy the exported Gyroflow Project to your Mac to import into Gyroflow Toolbox.","There are also some formats, such as Sony, GoPro, DJI and Insta360 that don't require launching Gyroflow."]},{"l":"Limitations","p":["You should always put the Gyroflow Toolbox effect on a clip inside a Compound Clip.","This is because you should only ever apply the Gyroflow Toolbox effect to an entire clip- the clip cannot be trimmed. Due to limitations in Final Cut Pro's FxPlug4 API - we currently can't determine the source start timecode of a clip. Because of this, the Gyroflow Toolbox effect should only be applied to a clip where the start of the clip hasn't been trimmed in the timeline (i.e. the clip you have in the timeline should show the first frame of the source clip). If you need to trim the start of this clip, you can use the full clip within a Compound Clip, then trim the Compound Clip as required. We have been in contact with the Final Cut Pro team about this, and there's currently no other better workaround or solution. Discussed in issue 8."]},{"l":"Test Footage","p":["The Gyroflow team have kindly shared some test footage that contains gyro data on Google Drive."]},{"l":"Supported Gyro Sources","p":["Android apps: Sensor Logger, Sensor Record, OpenCamera Sensors, MotionCam Pro","ArduPilot logs (*.bin, *.log)","Betaflight blackbox (*.bfl, *.bbl, *.csv)","Blackmagic RAW (*.braw)","DJI (Avata, O3 Air Unit)","GoPro (HERO 5 and later)","Gyroflow .gcsv log","Hawkeye Firefly X Lite CSV","Insta360 (OneR, OneRS, SMO 4k, Go, GO2, Caddx Peanut)","iOS apps: Sensor Logger, G-Field Recorder, Gyro, GyroCam","KanDao (Obisidian Pro)","RED RAW (*.r3d)","Runcam CSV (Runcam 5 Orange, iFlight GOCam GR, Runcam Thumb, Mobius Maxi 4K)","Sony (a1, a7c, a7r IV, a7 IV, a7s III, a9 II, FX3, FX6, FX9, RX0 II, RX100 VII, ZV1, ZV-E10)","This includes:","Vuze (VuzeXR)","WitMotion (WT901SDCL binary and *.txt)","You can find a list of all the currently supported gyro sources in the Gyroflow Documentation."]},{"i":"how-to-use-1","l":"How To Use","p":["After you have installed Gyroflow and Gyroflow Toolbox, you'll see a Gyroflow Toolbox Effect in the Effects Browser.","Because Gyroflow Toolbox has no knowledge of the clip it's been applied to, we can't automatically load the video clip into Gyroflow, so you'll need to manually import it by either dragging the file in, or clicking the Open File button.","From the Inspector you can then click Launch Gyroflow, to open the Gyroflow application.","Gyroflow Toolbox also has some limitations with certain footage - for example, currently with the RED Komodo, you'll need to transcode the footage to ProRes, load the ProRes in Gyroflow then load your original .R3D in the Motion data section of Gyroflow.","It's important that you include the processed gyro data, otherwise none of the stabilisation will come across to Gyroflow Toolbox, and you'll get an error message when attempting to import it.","Lens profile and Motion data files are automatically detected for some cameras (such as GoPro's). Otherwise search for the correct lens profile and open the Motion data file.","Once you have finished stabilising in Gyroflow you should click the Export button arrow and then Export project file (including processed gyro data).","The data from the Gyroflow Project gets saved within the Final Cut Pro library. If you want to reload it, you can either re-import, or if the file is in the same path, you can press Reload Project.","The Gyroflow Discord is also very active and a great way to get fast support.","This documentation is out-of-date for the v1.1.0 release and will be updated later today.","You can adjust and keyframe the FOV, Smoothness and Lens Correction within Final Cut Pro.","You can also experiment with the stabilisation options and algorithms. They all give different \"looks\" for the final result.","You can learn more about Gyroflow here.","You can now press the Import Project button in the Final Cut Pro Inspector to import it.","You can then apply this effect to any clips that are supported by Gyroflow.","You should play the video to check if additional synchronisation is required. If so, right-click on the timeline and select Auto sync here at at least two points of the video where some motion is present. This synchronises the gyro data and the video."]}],[{"l":"Support","p":["If you run into any bugs, crashes, or you have a feature request, you can post an issue here.","If you have any general questions or feedback, you can discuss here.","GitHub registration is free, and this GitHub repository is actively monitored by LateNite Films.","For Gyroflow support and discussion, you can also find the Gyroflow developers and other users on the Gyroflow Discord server.","You can also email us: support@latenitefilms.com","We're based in Melbourne, Australia- you can check the timezone here."]}],[{"l":"Release Notes"},{"i":"110","l":"1.1.0"},{"i":"released","l":"\uD83C\uDF89 Released:","p":["4th August 2023"]},{"i":"new-features","l":"\uD83C\uDF89 New Features:","p":["This is the first update for Gyroflow Toolbox since its launch. We've listened to your feedback and have tried to make it easier, cleaner and faster to use. We've completely re-designed the interface in the Final Cut Pro Inspector, and have re-designed everything under-the-hood to make it faster. HUGE thank you to AdrianEddy for all his help, support and genius! AdrianEddy is the brains behind Gyroflow, and Gyroflow Toolbox wouldn't exist without him - so again, thank you!","You can now drag-and-drop media files from Final Cut Pro and Finder into the Inspector to load media into Gyroflow Toolbox. This includes BRAW Toolbox clips.","You can now drag-and-drop Gyroflow Project files from Finder into the Inspector to load Gyroflow Projects into Gyroflow Toolbox.","You can now press \"Import Last Gyroflow Project\" to load the last project that was opened in the Gyroflow application.","You can now load Presets and Lens Profiles directly within Final Cut Pro.","Gyroflow Toolbox is now compatible with the latest Gyroflow v1.5.2 release, as well as previous older releases.","Added keyframe-able parameter controls for Horizontal Lock, Horizontal Roll, Position Offset, Input Rotation and Video Rotation.","Added \"Stabilisation Overview\" & \"Disable Gyroflow Stretch\" Tools.","Added \"Reveal in Finder\" and \"Export Gyroflow Project\" File Management Utilities.","The \"Launch Gyroflow\" button now opens the active Gyroflow Project or Media File if an existing file has already been loaded into Gyroflow Toolbox."]},{"i":"bug-fixes","l":"\uD83D\uDC1E Bug Fixes:","p":["Fixed a bug where reloading the Gyroflow Project didn't do anything due to caching. Thanks for reporting richo!","Fixed a bug where the Lens Correction was scaling at a different scale compared to Gyroflow. Thanks for reporting lagezon!"]},{"i":"100","l":"1.0.0"},{"i":"released","l":"\uD83C\uDF89 Released:","p":["1st January 2023","This is the first non-beta release of Gyroflow Toolbox on GitHub! \uD83E\uDD73","Thanks to everyone who helped beta test - especially @JW144754! Also a HUGE thank you to the amazing @AdrianEddy for all his endless help, support and technical genius!"]},{"i":"improvements","l":"\uD83D\uDD28 Improvements:","p":["We have a new icon for Gyroflow Toolbox, designed by the insanely talented Matthew Skiles.","We no longer ask you for permission to the Movies folder again, if the Motion Template needs updating in a future update."]},{"i":"100-beta9","l":"1.0.0-beta.9"},{"i":"released","l":"\uD83C\uDF89 Released:","p":["30th December 2022"]},{"i":"changes","l":"⚠️ Changes:","p":["Added support for macOS Big Sur. Thanks for suggesting Nikolai_Ch2!"]},{"i":"100-beta8","l":"1.0.0-beta.8"},{"i":"released","l":"\uD83C\uDF89 Released:","p":["30th December 2022"]},{"i":"changes","l":"⚠️ Changes:","p":["Updated gyroflow_core which addresses the issue discussed in the 1.0.0-beta.6 release notes. Thanks @AdrianEddy!"]},{"i":"100-beta7","l":"1.0.0-beta.7"},{"i":"released","l":"\uD83C\uDF89 Released:","p":["30th December 2022"]},{"i":"bug-fix","l":"\uD83D\uDC1E Bug Fix:","p":["Fixed a memory leak by adding [inputTexture setPurgeableState:MTLPurgeableStateEmpty];."]},{"i":"100-beta6","l":"1.0.0-beta.6"},{"i":"released","l":"\uD83C\uDF89 Released:","p":["30th December 2022"]},{"i":"bug-fix","l":"\uD83D\uDC1E Bug Fix:","p":["Fixed a bug where randomly sometimes the Gyroflow Toolbox effect would inconsistently just render the original image for a frame or two (as opposed to the stabilised image from Gyroflow). We've temporarily added a command_buffer.wait_until_completed(); call inside wgpu-hal to fix the Metal scheduling order. This should be fixed in the gyroflow_core Rust code properly at some point. Thanks to @AdrianEddy for all his Discord problem solving genius!"]},{"i":"100-beta5","l":"1.0.0-beta.5"},{"i":"released","l":"\uD83C\uDF89 Released:","p":["30th December 2022"]},{"i":"bug-fix","l":"\uD83D\uDC1E Bug Fix:","p":["Fixed potential bug where images in Final Cut Pro could look funky and corrupt, by changing the texture_copy flag in gyroflow_core to true for both input and output Metal Textures."]},{"i":"100-beta4","l":"1.0.0-beta.4"},{"i":"released","l":"\uD83C\uDF89 Released:","p":["29th December 2022"]},{"i":"improvements","l":"\uD83D\uDD28 Improvements:","p":["Gyroflow Toolbox now exchanges rendered data from gyroflow_core directly over a Metal. This should now give Gyroflow Toolbox very similar playback performance to the Gyroflow application. MASSIVE thank you to @AdrianEddy for all his amazing work and support making this happen! If you notice any glitches or issues on your machine, please submit a GitHub Issue and roll back to the previous 1.0.0-beta.3 release."]},{"i":"100-beta3","l":"1.0.0-beta.3"},{"i":"released","l":"\uD83C\uDF89 Released:","p":["22nd December 2022"]},{"i":"improvements","l":"\uD83D\uDD28 Improvements:","p":["Added support for 32-bit float and 8-bit images from Final Cut Pro and Apple Motion. MASSIVE thank you to @AdrianEddy for all his help and support! [Issue #5]","OsLogger initialisation now only happens once to avoid Console spamming. Thanks @AdrianEddy! [Issue #7]","Increased general performance by increasing cache size, and only triggering recomputing when the FOV, Lens Correction or Smoothness has actually changed in the Inspector. Thanks @AdrianEddy!"]},{"i":"100-beta2","l":"1.0.0-beta.2"},{"i":"released","l":"\uD83C\uDF89 Released:","p":["22nd December 2022","⚠️ Important Changes:","1.0.0-beta.2 makes changes to the Motion Template, so you'll need to install the new Motion Template, then delete and reapply any Gyroflow Toolbox effects you have in your timeline."]},{"i":"improvements","l":"\uD83D\uDD28 Improvements:","p":["We now make sure the Gyroflow Project contains processed gyro data before importing to avoid any confusion.","We've renamed \"Import Gyroflow Project\" to \"Import Project\", and \"Reload Gyroflow Project\" to \"Reload Project\" to avoid the buttons being clipped in the Final Cut Pro Inspector if you make the width of the Inspector as small as possible. Thanks @JW144754! Issue #2","Improved error messages if pressing the \"Import Project\" button fails."]},{"i":"bug-fixes","l":"\uD83D\uDC1E Bug Fixes:","p":["The Final Cut Pro Inspector should no longer hang for a long time when selecting a clip with Gyroflow Toolbox applied. Thanks @JW144754! Issue #4"]},{"i":"100-beta1","l":"1.0.0-beta.1"},{"i":"released","l":"\uD83C\uDF89 Released:","p":["21st December 2022","This is the first public beta of Gyroflow Toolbox. Woohoo!","⚠️ Known Issues:","Currently only 16-bit Float is supported. If Final Cut Pro or Apple Motion supply 32-bit Float and 8-bit images - it won't work. This will be fixed in a later beta."]}],[{"l":"Credits","p":["Gyroflow Toolbox has been thrown together by Chris Hocking at LateNite Films.","Chris also created CommandPost and BRAW Toolbox.","However, none of this would be possible without the incredible Gyroflow project and the incredibly help and support from their main developer, AdrianEddy.","The Gyroflow Toolbox icon was designed by the amazing Matthew Skiles."]}],[{"l":"Privacy Policy","p":["This is the privacy policy for the Gyroflow Toolbox, macOS Application that is available on the macOS App Store and TestFlight.","Gyroflow Toolbox does not collect any user data. No personal information is transmitted, stored, or used by this application.","Gyroflow Toolbox does not use any third-party analytics or tracking tools. It does not contain any in-app purchases or advertisements.","Gyroflow Toolbox does not communicate with any external servers or services, and it does not access any data on your device beyond what is necessary for the application to function properly.","Apple may collect and use certain usage and performance data from the apps that are available on the App Store. This data is used to help improve the App Store and the overall user experience.","This data collection is not specific to any individual user, and it is not possible for app developers to opt out of this data collection by Apple.","You can read Apple's App Store Privacy Policy here.","We use this GitHub Repository for documentation hosting and technical support. You can read GitHub's Privacy Policy here.","If you have any questions or concerns, you can submit an issue, or email us: producers@latenitefilms.com"]}],[{"l":"License","p":["All the code within this repository is licensed under MIT.","However, as soon as you build/compile the Rust code, it uses gyroflow_core as a dependancy, which uses the GNU General Public License v3.0 with App Store Exception.","This means that as soon as you build/compile Gyroflow Toolbox, the application falls under the same GNU General Public License v3.0 with App Store Exception license.","Because of this, any time you build the code in this repository, the binary will also fall under the same GNU General Public License v3.0 with App Store Exception."]}]]
\ No newline at end of file
+[[{"l":"Gyroflow Toolbox","p":["Allows you to import Gyroflow Projects into Apple's Final Cut Pro.","Advanced gyro-based video stabilisation without the round-tripping!","You can even use this in conjunction with BRAW Toolbox(also on the App Store), to stabilise Blackmagic RAW files!","To get started, simply drop your video clip from the Final Cut Pro Browser or Finder to the drop zone in the Final Cut Pro Inspector. You can also drop a Gyroflow Project.","Sony, GoPro (Hero 8+), DJI, Blackmagic RAW and Insta360 will be automatically synced when imported. Other cameras, such as RED, will require launching Gyroflow to synchronise.","GoPro, DJI and Insta360 will automatically select a Lens Profile. For all other cameras, you may need to manually select a Lens Profile, however, we'll try and GUESS a good match."]},{"i":"what-is-gyroflow","l":"What is Gyroflow?","p":["Gyroflow is a free and open source third-party application that can stabilise your video by using motion data from a gyroscope and optionally an accelerometer. Modern cameras record that data internally (such as Blackmagic, GoPro, Sony, Insta360 etc), and Gyroflow stabilises the captured footage precisely by using that data. It can also use gyro data from an external source, such as Betaflight Blackbox.","Gyroflow Toolbox allows you to take the stabilised data from Gyroflow and use it within Final Cut Pro as an effect, so you don't have to export a ProRes from Gyroflow!","You can watch a great Gyroflow Tutorial here."]}],[{"l":"LateNite Technology","p":["This website has been thrown together by Chris Hocking at LateNite.","Constantly looking for ways to innovate, LateNite is as passionate about production and post production as it is storytelling. Their pursuit of creative excellence has seen them work closely with global cinematic technology companies to craft post workflow solutions and critically celebrated software in-house."]},{"l":"In Development","p":["Here's a sneak peak of some of the things we have in development.","Exact shipping dates may vary, as all these ideas are still in active development, and subject to things like TestFlight & App Store approval, etc."]},{"l":"Timecode Toolbox","p":["ETA: July 2023","We're spinning out the Sony Timecode Repair Toolbox from CommandPost and making it a standalone app.","In addition to the current functionality, you'll also be able to modify the original camera files to add Final Cut Pro friendly timecode."]},{"l":"Metadata Toolbox","p":["ETA: August 2023","Metadata Toolbox is a Workflow Extension that allows you to drag in a project, select burn-in metadata options, then drag a Compound Clip back to the timeline with all the metadata as titles."]},{"l":"RAW Toolbox","p":["ETA: September 2023","Following in the footsteps of BRAW Toolbox, RAW Toolbox will initially add Nikon N-RAW support to Final Cut Pro."]},{"l":"Import Toolbox","p":["ETA: October 2023","Import Toolbox will be a Workflow Extension that allows you to import files with better metadata and preset controls (i.e. clip volume).","We will also be spinning out the Watch Folders from CommandPost and moving them into this app."]},{"l":"Assistant Toolbox","p":["ETA: November 2023","Assistant Toolbox will be a Workflow Extension that spins out Titles to Keywords and Auto Sequence from CommandPost.","It'll include various improvements and enhancements to make the job even easier for Assistant Editors working on long-form feature film projects."]},{"l":"Magic Toolbox","p":["ETA: December 2023","Magic Toolbox is our first Machine Learning experiment.","You'll be able to add titles to the timeline, to trigger Machine Learning actions such as:","SUBTITLES- Analyses the audio and adds subtitles","NARRATION- Turns text into speech in a narration tone","VOICE- Turns text into speech based on your description","GRADE- Adds Color Effects based on your description","MUSIC- Adds stock music or machine learning generated music based on your description","SFX- Adds sound effects from places like FreeSound.org","VIDEO- Adds machine learning generated video based on your description","Magic Toolbox will use existing services like ChatGPT and ElevenLabs- and it'll be BYO API Key."]},{"l":"TestFlight","p":["Here's some of our projects still in active development, awaiting Mac App Store approval:"]},{"l":"Recall Toolbox","p":["Recall Toolbox is a Final Cut Pro Workflow Extension that acts as a Shared Pasteboard.","Anything that you can copy and paste in Final Cut Pro, Recall Toolbox can store."]},{"l":"Build for Final Cut Pro","p":["There are third party tools like the amazing Copy 'Em (for Mac), but they're not quite as visual as Recall Toolbox, and they're not built from the ground up for Final Cut Pro users.","Recall Toolbox works as a Final Cut Pro Workflow Extension, so it's window position gets saved with your custom Workspaces.","Whilst CommandPost has had a Shared Pasteboard & Pasteboard Buffers for years, it's really optimised for Control Surfaces. You can access the Shared Pasteboard from the CommandPost menubar, and it is super powerful, but it's not as visual - you just get text, not a fully customisable thumbnail.","Recall Toolbox feels like a natural extension to Final Cut Pro, with a similar look and feel to Final Cut Pro's Effects Browser."]},{"l":"iCloud Sync","p":["Recall Toolbox automatically syncs to ALL your devices on the same iCloud account automagically!"]},{"l":"iCloud Sharing","p":["You can share folders with other iCloud users, and control permissions. For example, you could have a \"read only\" folder that contains client logos for a current job!"]},{"l":"Free Apps","p":["Here's some of our free tools used by professional editors worldwide:"]},{"l":"CommandPost","p":["CommandPost is a free and open source macOS application that bridges between control surfaces and software that doesn’t support them natively, such as Apple’s Final Cut Pro and Adobe’s After Effects.","It’s been downloaded over 163 thousand times, and there are over 2.6 thousands members in our Facebook Community.","It’s been translated into Arabic, Bengali, Catalan, Chinese (Simplified & Traditional), Danish, Dutch, French, German, Greek, Hindi, Hungarian, Italian, Japanese, Korean, Malayalam, Norwegian, Panjabi/Punjabi, Polish, Portuguese, Russian, Spanish, Swedish, Ukrainian & Vietnamese by our awesome community.","It’s used by filmmakers, developers, scientists and macOS power users all over the world to seriously speed up mundane tasks through powerful and customisable automation tools.","For example, you can apply individual effects within Final Cut Pro or After Effects with the single tap of a button.","Powered by Lua(the same scripting language used by Blackmagic Fusion, Adobe Lightroom and even parts of Apple iOS), it's insanely customisable and powerful.","It runs natively on Apple Silicon and is fully compatible with Hammerspoon.","You can listen to Chris explain CommandPost on Final Cut Pro Radio Episode #57 and Episode #43."]},{"l":"User Quotes","p":["“ Titles to Keywords is a huge timesaver when editing complex scenes. Couldn’t live without it anymore. And directors love that every delivery of any line from any take is just one click away! ” Knut Hake- Editor on Netflix's Blood Red Sky","“ CommandPost and FCP are so intertwined on my day to day that I see them as one app! ” Marcos Castiel BFE- Editor on Netflix's Turn of the Tide","“ Command Post started as a FCPX utility but it goes further than that. You can use it to map almost any function to supported hardware devices to work with any app like a BMD Speed Editor and Avid Media Composer! ” Marc Bach- Editor & Colourist","“ Chris's support is the best you will find anywhere on the planet. He was proactive and able to implement features for me on the spot. 5 STAR product 5 STAR support. ControllerMate is what I used to use. CommandPost is faster and easier. ” Ross Batten- Senior Sound Designer (ProTools)","“ Search Console is like Spotlight on steroids. It can quickly find and execute any obscure command, NLE and OS-wide, fire up keyboard makros (scripts), and especially, find and place Effects and Effect Templates, directly onto selected clips in my FCP timeline. It constantly saves me clicks. ” Florian Duffe- Editor","“ CommandPost is so many things for so many people. For me it is a Final Cut Pro automation system that unlocks hidden features and uniquely supports advanced workflows. CommandPost’s secret weapon? Deep connections with the postproduction community which mean that it constantly improves as the needs of editors and post professionals evolve. ” Alex ‘4D’ Gollner- Motion Template Creator","“ Chris, you have no idea how helpful your Titles to Keywords toolbox has been on our latest production. Without the toolbox these 2-3 hour long timelines (around 900 keywords) would have been nearly impossible to tag with the FCP built in way. It's very long scenes with around 50 lines of text for all characters. ” Sam Pluemacher- Assistant Editor on Netflix's Blood Red Sky","“ As someone who doesn’t like clicking to do things, CommandPost makes my work much more likeable! ” Oli Frost- Editor","“ CommandPost supports my Loupedeck, Stream Deck and Razer devices with advanced Final Cut Pro integrations. Eliminating the need for multiple apps and reducing complexity. ” Sam Pluemacher- Assistant Editor on Netflix's Blood Red Sky","“ CommandPost is the first thing you should install If you like to tinker. This genius app extends Final Cut Pro in all kinds of ways, enabling advanced workflows, automation, and even integration with external hardware such as MIDI controllers. Recommended. ” Iain Anderson- Author of Final Cut Pro Efficient Editing"]},{"l":"Transfer Toolbox","p":["Transfer Toolbox allows you to convert Final Cut Pro (for Mac) libraries into Final Cut Pro (for iPad) projects!","You can now easily get from your Desktop to your iPad! Simply drag your existing Final Cut Pro library into the application's drop zone.","You should ensure your library only has a single event, and all project timecode starts at 00:00:00:00.","All Motion Content and Media should be contained within the Library.","If you have custom fonts on the Mac Final Cut Pro library, you should manually install them on the iPad before importing the project.","Transfer Toolbox requires Final Cut Pro 10.6.6 or later."]},{"l":"App Store","p":["Here's some of our products currently for sale on the Mac App Store:"]},{"l":"BRAW Toolbox","p":["BRAW Toolbox allows you to import Blackmagic RAW files directly into Final Cut Pro without transcoding.","No more waiting. No more transcoding. No more massive ProRes files.","Save hours of time, and terabytes of storage!","The BRAW Toolbox Workflow Extension allows you to prepare all of your footage prior to import. You can easily and quickly change all the RAW parameters, and copy and paste settings from different BRAW clips. You can even save and restore Presets that contain specific parameters, saving time for example, if you always use the same Gamut & Gamma.","Once imported into Final Cut Pro, you can still modify the RAW parameters at any time.","You can even keyframe the ISO, Exposure, Color Temp, Tint and Custom Gamma Controls!","BRAW Toolbox comes with a Metadata View that allows you to view every piece of BRAW Metadata directly within the Final Cut Pro Inspector.","There are automatic Decode Quality options for both HD and UltraHD projects, and you can also work at a low Decode Quality, then apply a \"Global Setting\" to force Full Quality prior to exporting - meaning you never have to worry about creating proxies for performance. BRAW Toolbox gives you complete freedom and flexibility.","You can also use the Workflow Extension to send your project/timeline to DaVinci Resolve for grading - all using BRAW files directly from the camera!","BRAW Toolbox requires Final Cut Pro 10.6.5 or later."]},{"l":"User Reviews","p":["This developer did what Apple Couldn't/Wouldn't This app is a great solution to a common problem Final Cut Pro users have: getting Blackmagic Raw footage into the app. At first it might seem like a bizarre workaround, but you only have to go through the process of setting it up once, and then you can easily import your Blackmagic footage right into FCP. Honestly, from that point on it works so incredibly well that I really struggle to understand why Apple has made it so difficult. Except it's not difficult, not anymore. This is great software: a small developer solving a problem that a big one (Apple) can't. That's innovation, my friends.","moosefuel – Feb 3, 2023 (Apple App Store Review)","The tool we have dreamed of is here. For lovers of Final Cut Pro who have struggled with the endless BRAW proxy XML loop, this is a dream come true. BRAW natively inside Final Cut. Controls for RAW adjustments at your fingertips. Is it the full Resolve interface? No, doesnt need to be, Between BRAW ToolBox and FCP, most edits can be done natively without ever having the leave the Final Cut NLE. If you shoot any BRAW camera, this is the best of both worlds if you live in the FCP ecosystem. Thank you latenightfilms team for this, its a huge step forward and a wonderful plugin.","Chasing Photography – May 16, 2023 (Apple App Store Review)","Perfect! Just perfect.","Viaswage – Feb 18, 2023 (Apple App Store Review)","Great! Love this! thank you!","NarimanGafurov – Feb 6, 2023 (Apple App Store Review)","UMMMMMM THANK YOU, YOU'RE A GENIUS I've needed this for years!!!!!! You are a genius and this is incredible!!! Thank you so much!!! No clue how BM never made this.","gordonfromvan – Feb 4, 2023 (Apple App Store Review)","I've been waiting for this! I can finally use my two Blackmagic cameras and shoot in BRAW. As a Final Cut Pro editor, I'm really excited. The app is working great! I really appreciate the team at LateNite for all the hard work it took to get this up and running. Well worth the money to be able to handle BRAW seamlessly. Scott_Hartman – Feb 2, 2023 (Apple App Store Review)","Boom! Such an amazing plugin and works fantastic! Grant Digital Sky – Feb 2, 2023 (Apple App Store Review)","Absolutely Amazing. Solves a massive problem and works beautifully! Jmurphy8503 – Jan 31, 2023 (Apple App Store Review)","The impossible made possible. Amazing to work natively with BRAW in my favourite editor. Thank you! MadMitch1993 – Jan 30, 2023 (Apple App Store Review)"]},{"l":"Gyroflow Toolbox","p":["Gyroflow Toolbox allows you to import Gyroflow Projects into Final Cut Pro.","Gyroflow is a free and open source third-party application that can stabilise your video by using motion data from a gyroscope and optionally an accelerometer. Modern cameras record that data internally (GoPro, Sony, Insta360 etc), and Gyroflow stabilizes the captured footage precisely by using them. It can also use gyro data from an external source (eg. from Betaflight blackbox).","Gyroflow Toolbox allows you to take the stabilised data from Gyroflow and use it within Final Cut Pro as an effect, so you don't have to export a ProRes from Gyroflow!","You can even use this in conjunction with BRAW Toolbox (also on the App Store), to stabilise Blackmagic RAW files!","None of this would be possible without the incredible Gyroflow project and the incredibly help and support from their main developer, AdrianEddy."]},{"i":"user-reviews-1","l":"User Reviews","p":["Nice product! Thank you Chris!","NarimanGafurov – Feb 6, 2023 (Apple App Store Review)","The Best Way to Stabilize Pro Res RAW I record both internally and externally with an Atomos Ninja, on my FX3 with the end goal of delivering HDR. I record internal to capture Gyroscopic data that my FX3 records. This allows me to Use GryoFlow, and Thus GryoFlow Toolbox to stabilize Pro Res RAW footage. This tool has made it possible, and works awesomely. I highly recommend this tool it will help immensely.","Tydar94 – Jan 27, 2023 (Apple App Store Review)"]},{"l":"Marker Toolbox","p":["Marker Toolbox allows you to import Vimeo CSV, Wipster CSV, Dropbox Replay JSON & Email Comments into Apple's Final Cut Pro via a handy Workflow Extension.","You can also OPTIONALLY use OpenAI's ChatGPT to help translate email comments into markers using your own personal OpenAI API key!","If you use Vimeo Review pages or Wipster to share video edits with clients to consolidate feedback, you can simply export a CSV file from Vimeo or Wipster, and drag it into the Workflow Extension to convert the comments into Markers within Final Cut Pro. It's fast and easy!","Dropbox Replay works exactly the same way, except Marker Toolbox will also import any drawn annotations!","Similar to Frame.io's Workflow Extension, the markers come in as a Compound Clip, that you can then \"break apart\" so that the markers are attached to the clips in your Primary Storyline, meaning that your clients comments stay in the correct position as you make revisions to the edit. For each marker, there's also a title, so that you can easily visually see the comments right in your Viewer - this is great if you need to export an edit with all your client feedback \"burnt\" into the export.","Replies and the date the comment was added can be included in the Marker names. It also takes \"resolved\" comments in Vimeo, Wipster & Dropbox Replay, and marks them as \"completed\" in Final Cut Pro!","You can also easily copy and paste client feedback from emails into the Workflow Extension. In most cases, you can use the \"Process Comments Locally\" button to use a custom-built algorithm that converts each line of text into a comment. However, you can also the power of OpenAI's ChatGPT to help translate more complicated feedback into markers. You can customise the ChatGPT prompt, and also pick the ChatGPT Model. You supply your own OpenAI API key, giving you full control.","This can be a MASSIVE time saver, as you can simply copy and paste a long list of email comments, and ChatGPT will do the work to convert them into easy-to-read Final Cut Pro markers, that you can then easily navigate via the Timeline Index.","Marker Toolbox requires Final Cut Pro 10.6.5 or later."]},{"i":"user-reviews-2","l":"User Reviews","p":["I’ve been absolutely flatout while working in Thailand. Wipsters has been been great, helping me manage projects and reviewers across four countries. Stoked Marker Toolbox can send Wipster notes straight into #fcpx","Alister Robbie via Twitter","Excellent addition to FCP This is a great tool. I have my clients make notes on Vimeo, and Marker Toolbox lets me download a .csv of those comments and create markers on the FCP project/timeline at the proper locations, with notes visible and that will follow the clips as I move them. Once downloaded and installed it's easy. Downloading the .csv and running it through Marker Toolbox and adding the Markers to the project/timeline takes less than a minute, then you're ready to go. Really great find!","Robert heinlein's son – May 31, 2023 (Apple App Store Review)","Amazing simple I wanted an app like this since I started editing. Now for the first time I can process the comments I get via an e-mail on an edit from the start and not, as I usualy do, begin at the end of the edit and work backwards.","Blazy – Apr 6, 2023 (Apple App Store Review)"]}],[{"l":"Buy on Mac App Store","p":["Gyroflow Toolbox is a one-time payment of 9.99.","This is generally 9.99 in your local currency (i.e. AUD9.99, USD9.99, CAD9.99).","However, if your country doesn't have an equivalent of 9.99 (i.e. Rp 169,000 in Indonesia), it will default to a USD$9.99 equivalent(calculated by Apple).","There is currently no free trial, and it is only be available on the Mac App Store as a one-time payment.","Alternatively, as Gyroflow Toolbox is open source, you can also build it yourself via GitHub.","You can find information about Educational Pricing here."]},{"l":"Previous Versions","p":["The initial public release of Gyroflow Toolbox v1.0.0 was USD$4.99.","We then later tweaked the pricing to make it 9.99 in your local currency (i.e. AUD9.99, USD9.99, CAD9.99).","With the release of Gyroflow Toolbox v1.1.0, we increased the price to 9.99 to cover development costs.","We may increase the price in the future, depending on the development time required and the amount of users."]}],[{"l":"Educational Pricing","p":["Educational institutions can get a 50% discount when they purchase 20 or more copies through Apple School Manager.","Please contact Apple if you need help with Educational Pricing."]}],[{"l":"Installation","p":["Gyroflow Toolbox allows you to take the stabilised data from Gyroflow and use it within Final Cut Pro as an effect.","You can purchase the latest Gyroflow Toolbox release on the Mac App Store.","You can download the latest Gyroflow release for free from the Gyroflow website.","Please install the latest Gyroflow first. You can learn more about installing Gyroflow here."]},{"l":"Installing Gyroflow Toolbox","p":["If it's the first time installing the software, or if there's been an update, you'll be prompted to Install Motion Template.","Once you click the button, you'll be prompted to grant permission to your Movies folder. This is due to macOS's sandboxing, and you'll only need to do this once. Click OK.","You then need to click Grant Access:","Once done, you'll be presented with a successful message:","The button will now be disabled, and will say Motion Template Installed. You can now close the Gyroflow Toolbox application.","Now that you have Gyroflow Toolbox installed, you can learn how to use it."]}],[{"l":"How To Use"},{"i":"what-is-gyroflow","l":"What is Gyroflow?","p":["Gyroflow is a free and open source third-party application that can stabilise your video by using motion data from a gyroscope and optionally an accelerometer. Modern cameras record that data internally (such as Blackmagic, GoPro, Sony, Insta360 etc), and Gyroflow stabilises the captured footage precisely by using that data. It can also use gyro data from an external source, such as Betaflight Blackbox.","Gyroflow Toolbox allows you to take the stabilised data from Gyroflow and use it within Final Cut Pro as an effect, so you don't have to export a ProRes from Gyroflow!","It's important to understand that Gyroflow and Gyroflow Toolbox are independent/seperate applications, that share the same render engine - Gyroflow Core."]},{"l":"Learning Gyroflow","p":["Gyroflow has fantastic documentation that is regularly updated.","The Gyroflow Discord is also very active and a great way to get fast support from some of the best and nicest people in the industry.","There are also some great YouTube Videos around, such as:"]},{"l":"Prerequisites","p":["To create the Gyroflow Project (that you import into Gyroflow Toolbox), you'll need to install the latest Gyroflow application.","However, you don't necessarily have to install Gyroflow on the same machine as Gyroflow Toolbox- for example, you could run Gyroflow on a fast PC, then copy the exported Gyroflow Project to your Mac to import into Gyroflow Toolbox.","There are also some formats, such as GoPro, DJI, Insta360(and even some Sony clips) that don't require launching Gyroflow at all, and you can stay completely within Final Cut Pro."]},{"l":"Limitations","p":["You should always put the Gyroflow Toolbox effect on a clip inside a Compound Clip.","This is because you should only ever apply the Gyroflow Toolbox effect to an entire clip- the clip cannot be trimmed. Due to limitations in Final Cut Pro's FxPlug4 API - we currently can't determine the source start timecode of a clip. Because of this, the Gyroflow Toolbox effect should only be applied to a clip where the start of the clip hasn't been trimmed in the timeline (i.e. the clip you have in the timeline should show the first frame of the source clip). If you need to trim the start of this clip, you can use the full clip within a Compound Clip, then trim the Compound Clip as required.","We have been in contact with the Final Cut Pro team about this, and there's currently no other better workaround or solution. This is discussed on GitHub and we would appreciate it if you could let Apple know this is something you'd like to see addressed. You can reference our Apple Feedback Assistant ID: FB12043900."]},{"l":"Test Footage","p":["The Gyroflow team have kindly shared some test footage that contains gyro data on Google Drive."]},{"l":"Supported Gyro Sources","p":["Android apps: Sensor Logger, Sensor Record, OpenCamera Sensors, MotionCam Pro","ArduPilot logs (*.bin, *.log)","Betaflight blackbox (*.bfl, *.bbl, *.csv)","Blackmagic RAW (*.braw)","DJI (Avata, O3 Air Unit)","GoPro (HERO 5 and later)","Gyroflow .gcsv log","Hawkeye Firefly X Lite CSV","Insta360 (OneR, OneRS, SMO 4k, Go, GO2, Caddx Peanut)","iOS apps: Sensor Logger, G-Field Recorder, Gyro, GyroCam","KanDao (Obisidian Pro)","RED RAW (*.r3d)","Runcam CSV (Runcam 5 Orange, iFlight GOCam GR, Runcam Thumb, Mobius Maxi 4K)","Sony (a1, a7c, a7r IV, a7 IV, a7s III, a9 II, FX3, FX6, FX9, RX0 II, RX100 VII, ZV1, ZV-E10)","This includes:","Vuze (VuzeXR)","WitMotion (WT901SDCL binary and *.txt)","You can find a list of all the currently supported gyro sources in the Gyroflow Documentation."]},{"i":"how-to-use-1","l":"How To Use","p":["If you haven't already, follow the installation instructions here first.","After you have installed Gyroflow and Gyroflow Toolbox, you'll see a Gyroflow Toolbox Effect in the Effects Browser:","You can then apply this effect to any clips that are supported by Gyroflow."]},{"l":"Applying the Effect","p":["You should always put the Gyroflow Toolbox effect on a clip inside a Compound Clip (see limitations above).","It will then look like this:"]},{"l":"Importing Gyroflow Project","p":["If you have a pre-existing Gyroflow Project, there's a few different ways you can import a Gyroflow Project:","Drag & Drop from Finder","Drag & Drop from another application (such as an Asset Management Tool)","Press the Import Gyroflow Project","Press the Import Last Gyroflow Project","If you have a Gyroflow Project with the same filename sitting next to the Media File, Gyroflow Toolbox will always try and load that Gyroflow Project."]},{"l":"Importing Media File","p":["If you don't already have a Gyroflow Project for a media file, there's a few different ways you can import a media file:","Drag & Drop from Final Cut Pro Browser","Drag & Drop from another application (such as an Asset Management Tool)","Drag & Drop from Finder","Press the Import Media File button","If you drag-and-drop from the Final Cut Pro Browser you will be prompted to select the video file you imported (due to macOS's sandboxing).","If there's a Gyroflow Project next to the Media File with the exact same filename, Gyroflow Toolbox will try to load that file instead.","GoPro, DJI, Insta360 and some Sony files will automatically synchronise (as the gyroscope data is within the media file), so then you'll be presented with:","If the Media File requires synchronising in the hero Gyroflow application, Gyroflow Toolbox will launch the Media File in Gyroflow.","If the Media File requires manually loading a Lens Profile, Gyroflow Toolbox will prompt to allow you to select a Lens Profile from the built-in collection within Gyroflow."]},{"l":"Gyroflow Parameters","p":["Once you've imported a Media File or Gyroflow Project you can then use the Gyroflow Parameters to customise things.","All of the parameters are keyframe-able, however...","Any keyframes created in Gyroflow will take priority over the keyframes in Final Cut Pro.","Input Rotation is when Final Cut Pro rotates the input pixels before feeding to Gyroflow Toolbox.","For example, if an .mp4 contains rotation in the metadata, Final Cut Pro may automatically rotate it. Gyroflow expects raw pixels directly from the source file, so if Final Cut Pro has already rotated them, it won't match.","Given this, the Input Rotation is the rotation done by the host BEFORE feeding to Gyroflow Toolbox, whereas Video Rotation is a rotation by the Gyroflow engine AFTER stabilisation."]},{"l":"Tools","p":["There are also some handy tools:"]},{"l":"Stabilisation Overview","p":["This allow you to zoom out the view to see the stabilization results. This is very useful to see if and how Gyroflow is working. You should disable this before rendering."]},{"l":"Disable Gyroflow Stretch","p":["If you used Input stretch in the lens profile in Gyroflow, and you de-stretched the video separately in Resolve, check this to disable Gyroflow's internal stretching."]},{"l":"File Management","p":["At the bottom of the Effect is in the Inspector is some File Management tools:","Reload Gyroflow Project allows you to reload the contents of a Gyroflow Project if you've modified it externally (i.e. in the Gyroflow application).","Launch Gyroflow is handy for opening the hero Gyroflow application. If you have a Gyroflow Project or Media File already loaded, it will open that file.","Export Gyroflow Project is handy if you imported a GoPro, DJI or Insta360 clip (that didn't require synchronising in the hero Gyroflow application), and you need to export a Gyroflow Project for sharing or editing.","Reveal in Finder reveals the Gyroflow Project in Finder.","Settings allows you to enable/disable some of the helper alerts/popups throughout the application, Show Log Files in Finder, and Reset All Settings(which is only really used for debugging/development)."]}],[{"l":"Support","p":["Gyroflow has fantastic documentation that is regularly updated.","The Gyroflow Discord is also very active and a great way to get fast support from some of the best and nicest people in the industry. We also actively monitor this Discord.","If you run into any bugs, crashes, or you have a feature request, you can post an issue here.","If you have any general questions or feedback, you can discuss here.","GitHub registration is free, and this GitHub repository is actively monitored by Chris at LateNite.","You can also email Chris via: support@latenitefilms.com","We're based in Melbourne, Australia- you can check the timezone here."]}],[{"l":"Release Notes"},{"i":"110","l":"1.1.0"},{"i":"released","l":"\uD83C\uDF89 Released:","p":["4th August 2023"]},{"i":"new-features","l":"\uD83C\uDF89 New Features:","p":["This is the first update for Gyroflow Toolbox since its launch. We've listened to your feedback and have tried to make it easier, cleaner and faster to use. We've completely re-designed the interface in the Final Cut Pro Inspector, and have re-designed everything under-the-hood to make it faster. HUGE thank you to AdrianEddy for all his help, support and genius! AdrianEddy is the brains behind Gyroflow, and Gyroflow Toolbox wouldn't exist without him - so again, thank you!","You can now drag-and-drop media files from Final Cut Pro and Finder into the Inspector to load media into Gyroflow Toolbox. This includes BRAW Toolbox clips.","You can now drag-and-drop Gyroflow Project files from Finder into the Inspector to load Gyroflow Projects into Gyroflow Toolbox.","You can now press \"Import Last Gyroflow Project\" to load the last project that was opened in the Gyroflow application.","You can now load Presets and Lens Profiles directly within Final Cut Pro.","Gyroflow Toolbox is now compatible with the latest Gyroflow v1.5.2 release, as well as previous older releases.","Added keyframe-able parameter controls for Horizontal Lock, Horizontal Roll, Position Offset, Input Rotation and Video Rotation.","Added \"Stabilisation Overview\" & \"Disable Gyroflow Stretch\" Tools.","Added \"Reveal in Finder\" and \"Export Gyroflow Project\" File Management Utilities.","The \"Launch Gyroflow\" button now opens the active Gyroflow Project or Media File if an existing file has already been loaded into Gyroflow Toolbox."]},{"i":"bug-fixes","l":"\uD83D\uDC1E Bug Fixes:","p":["Fixed a bug where reloading the Gyroflow Project didn't do anything due to caching. Thanks for reporting richo!","Fixed a bug where the Lens Correction was scaling at a different scale compared to Gyroflow. Thanks for reporting lagezon!"]},{"i":"100","l":"1.0.0"},{"i":"released","l":"\uD83C\uDF89 Released:","p":["1st January 2023","This is the first non-beta release of Gyroflow Toolbox on GitHub! \uD83E\uDD73","Thanks to everyone who helped beta test - especially @JW144754! Also a HUGE thank you to the amazing @AdrianEddy for all his endless help, support and technical genius!"]},{"i":"improvements","l":"\uD83D\uDD28 Improvements:","p":["We have a new icon for Gyroflow Toolbox, designed by the insanely talented Matthew Skiles.","We no longer ask you for permission to the Movies folder again, if the Motion Template needs updating in a future update."]},{"i":"100-beta9","l":"1.0.0-beta.9"},{"i":"released","l":"\uD83C\uDF89 Released:","p":["30th December 2022"]},{"i":"changes","l":"⚠️ Changes:","p":["Added support for macOS Big Sur. Thanks for suggesting Nikolai_Ch2!"]},{"i":"100-beta8","l":"1.0.0-beta.8"},{"i":"released","l":"\uD83C\uDF89 Released:","p":["30th December 2022"]},{"i":"changes","l":"⚠️ Changes:","p":["Updated gyroflow_core which addresses the issue discussed in the 1.0.0-beta.6 release notes. Thanks @AdrianEddy!"]},{"i":"100-beta7","l":"1.0.0-beta.7"},{"i":"released","l":"\uD83C\uDF89 Released:","p":["30th December 2022"]},{"i":"bug-fix","l":"\uD83D\uDC1E Bug Fix:","p":["Fixed a memory leak by adding [inputTexture setPurgeableState:MTLPurgeableStateEmpty];."]},{"i":"100-beta6","l":"1.0.0-beta.6"},{"i":"released","l":"\uD83C\uDF89 Released:","p":["30th December 2022"]},{"i":"bug-fix","l":"\uD83D\uDC1E Bug Fix:","p":["Fixed a bug where randomly sometimes the Gyroflow Toolbox effect would inconsistently just render the original image for a frame or two (as opposed to the stabilised image from Gyroflow). We've temporarily added a command_buffer.wait_until_completed(); call inside wgpu-hal to fix the Metal scheduling order. This should be fixed in the gyroflow_core Rust code properly at some point. Thanks to @AdrianEddy for all his Discord problem solving genius!"]},{"i":"100-beta5","l":"1.0.0-beta.5"},{"i":"released","l":"\uD83C\uDF89 Released:","p":["30th December 2022"]},{"i":"bug-fix","l":"\uD83D\uDC1E Bug Fix:","p":["Fixed potential bug where images in Final Cut Pro could look funky and corrupt, by changing the texture_copy flag in gyroflow_core to true for both input and output Metal Textures."]},{"i":"100-beta4","l":"1.0.0-beta.4"},{"i":"released","l":"\uD83C\uDF89 Released:","p":["29th December 2022"]},{"i":"improvements","l":"\uD83D\uDD28 Improvements:","p":["Gyroflow Toolbox now exchanges rendered data from gyroflow_core directly over a Metal. This should now give Gyroflow Toolbox very similar playback performance to the Gyroflow application. MASSIVE thank you to @AdrianEddy for all his amazing work and support making this happen! If you notice any glitches or issues on your machine, please submit a GitHub Issue and roll back to the previous 1.0.0-beta.3 release."]},{"i":"100-beta3","l":"1.0.0-beta.3"},{"i":"released","l":"\uD83C\uDF89 Released:","p":["22nd December 2022"]},{"i":"improvements","l":"\uD83D\uDD28 Improvements:","p":["Added support for 32-bit float and 8-bit images from Final Cut Pro and Apple Motion. MASSIVE thank you to @AdrianEddy for all his help and support! [Issue #5]","OsLogger initialisation now only happens once to avoid Console spamming. Thanks @AdrianEddy! [Issue #7]","Increased general performance by increasing cache size, and only triggering recomputing when the FOV, Lens Correction or Smoothness has actually changed in the Inspector. Thanks @AdrianEddy!"]},{"i":"100-beta2","l":"1.0.0-beta.2"},{"i":"released","l":"\uD83C\uDF89 Released:","p":["22nd December 2022","⚠️ Important Changes:","1.0.0-beta.2 makes changes to the Motion Template, so you'll need to install the new Motion Template, then delete and reapply any Gyroflow Toolbox effects you have in your timeline."]},{"i":"improvements","l":"\uD83D\uDD28 Improvements:","p":["We now make sure the Gyroflow Project contains processed gyro data before importing to avoid any confusion.","We've renamed \"Import Gyroflow Project\" to \"Import Project\", and \"Reload Gyroflow Project\" to \"Reload Project\" to avoid the buttons being clipped in the Final Cut Pro Inspector if you make the width of the Inspector as small as possible. Thanks @JW144754! Issue #2","Improved error messages if pressing the \"Import Project\" button fails."]},{"i":"bug-fixes","l":"\uD83D\uDC1E Bug Fixes:","p":["The Final Cut Pro Inspector should no longer hang for a long time when selecting a clip with Gyroflow Toolbox applied. Thanks @JW144754! Issue #4"]},{"i":"100-beta1","l":"1.0.0-beta.1"},{"i":"released","l":"\uD83C\uDF89 Released:","p":["21st December 2022","This is the first public beta of Gyroflow Toolbox. Woohoo!","⚠️ Known Issues:","Currently only 16-bit Float is supported. If Final Cut Pro or Apple Motion supply 32-bit Float and 8-bit images - it won't work. This will be fixed in a later beta."]}],[{"l":"Credits","p":["Gyroflow Toolbox has been thrown together by Chris Hocking at LateNite Films.","Chris also created CommandPost and BRAW Toolbox.","However, none of this would be possible without the incredible Gyroflow project and the incredibly help and support from their main developer, AdrianEddy.","The Gyroflow Toolbox icon was designed by the amazing Matthew Skiles."]}],[{"l":"Privacy Policy","p":["This is the privacy policy for the Gyroflow Toolbox, macOS Application that is available on the macOS App Store and TestFlight.","Gyroflow Toolbox does not collect any user data. No personal information is transmitted, stored, or used by this application.","Gyroflow Toolbox does not use any third-party analytics or tracking tools. It does not contain any in-app purchases or advertisements.","Gyroflow Toolbox does not communicate with any external servers or services, and it does not access any data on your device beyond what is necessary for the application to function properly.","Apple may collect and use certain usage and performance data from the apps that are available on the App Store. This data is used to help improve the App Store and the overall user experience.","This data collection is not specific to any individual user, and it is not possible for app developers to opt out of this data collection by Apple.","You can read Apple's App Store Privacy Policy here.","We use this GitHub Repository for documentation hosting and technical support. You can read GitHub's Privacy Policy here.","If you have any questions or concerns, you can submit an issue, or email us: producers@latenitefilms.com"]}],[{"l":"License","p":["All the code within this repository is licensed under MIT.","However, as soon as you build/compile the Rust code, it uses gyroflow_core as a dependancy, which uses the GNU General Public License v3.0 with App Store Exception.","This means that as soon as you build/compile Gyroflow Toolbox, the application falls under the same GNU General Public License v3.0 with App Store Exception license.","Because of this, any time you build the code in this repository, the binary will also fall under the same GNU General Public License v3.0 with App Store Exception."]}]]
\ No newline at end of file
diff --git a/sitemap.xml.gz b/sitemap.xml.gz
index b8499c15..894cea15 100644
Binary files a/sitemap.xml.gz and b/sitemap.xml.gz differ
diff --git a/static/06-install.png b/static/06-install.png
index 383508a8..afe84920 100644
Binary files a/static/06-install.png and b/static/06-install.png differ
diff --git a/static/07-install.png b/static/07-install.png
index bb81b9ec..4bb11d1c 100644
Binary files a/static/07-install.png and b/static/07-install.png differ
diff --git a/static/08-install.png b/static/08-install.png
deleted file mode 100644
index 66b2f089..00000000
Binary files a/static/08-install.png and /dev/null differ
diff --git a/static/10-install.png b/static/10-install.png
new file mode 100644
index 00000000..194602cc
Binary files /dev/null and b/static/10-install.png differ
diff --git a/static/11-install.png b/static/11-install.png
new file mode 100644
index 00000000..f90d6ed6
Binary files /dev/null and b/static/11-install.png differ
diff --git a/static/12-install.png b/static/12-install.png
new file mode 100644
index 00000000..51cee404
Binary files /dev/null and b/static/12-install.png differ
diff --git a/static/13-install.png b/static/13-install.png
new file mode 100644
index 00000000..ac0a7b0f
Binary files /dev/null and b/static/13-install.png differ
diff --git a/static/youtube-gyroflow.jpeg b/static/youtube-gyroflow.jpeg
new file mode 100644
index 00000000..7daaa752
Binary files /dev/null and b/static/youtube-gyroflow.jpeg differ
diff --git a/static/youtube-how-to-use.jpeg b/static/youtube-how-to-use.jpeg
new file mode 100644
index 00000000..ee30e761
Binary files /dev/null and b/static/youtube-how-to-use.jpeg differ
diff --git a/support/index.html b/support/index.html
index 6722f2e9..6a0c03d3 100644
--- a/support/index.html
+++ b/support/index.html
@@ -3,7 +3,7 @@
-
+
@@ -11,7 +11,7 @@
Support
-
+
@@ -20,24 +20,24 @@
-
+
-
+
-
+
-
+
-
+
@@ -371,11 +358,12 @@
The Gyroflow Discord is also very active and a great way to get fast support from some of the best and nicest people in the industry. We also actively monitor this Discord.
If you run into any bugs, crashes, or you have a feature request, you can post an issue here.
If you have any general questions or feedback, you can discuss here.
-
GitHub registration is free, and this GitHub repository is actively monitored by LateNite Films.
-
For Gyroflow support and discussion, you can also find the Gyroflow developers and other users on the Gyroflow Discord server.
+
+ 
+
+ 
+ 
+ 
+ 
+ 