defines.h

/****************************************************************************************************************************
  defines.h
  
  For all Generic boards such as ESP8266, ESP32, WT32_ETH01, SAMD21/SAMD51, nRF52, STM32F/L/H/G/WB/MP1,Teensy, Portenta_H7
  with WiFiNINA, ESP8266/ESP32 WiFi, ESP8266/ESP32-AT, W5x00, ENC28J60, Native-Ethernet, Portenta Ethernet/WiFi
  
  DDNS_Generic is a library to automatically add port mappings to router using UPnP SSDP
  (Simple Service Discovery Protocol) in order to provide access to the local Web Services from the Internet.
  
  Based on and modified from Ofek Pearl's TinyUPnP Library (https://github.com/ofekp/TinyUPnP)
  Built by Khoi Hoang https://github.com/khoih-prog/UPnP_Generic
  Licensed under GPL-3.0 license
 *****************************************************************************************************************************/

#ifndef defines_h
#define defines_h

// Debug Level from 0 to 4
#define _DDNS_GENERIC_LOGLEVEL_     1
#define _UPNP_LOGLEVEL_             2

// Select DDNS_USING_WIFI for boards using built-in WiFi, such as Nano-33-IoT
#define DDNS_USING_WIFI             false
#define DDNS_USING_ETHERNET         true

/////////////////////////////////

#if ( defined(ARDUINO_NANO_RP2040_CONNECT) || defined(ARDUINO_ARCH_RP2040) || defined(ARDUINO_RASPBERRY_PI_PICO) || \
      defined(ARDUINO_GENERIC_RP2040) || defined(ARDUINO_ADAFRUIT_FEATHER_RP2040) )
  #if defined(ETHERNET_USE_RP2040)
    #undef ETHERNET_USE_RP2040
  #endif
  #define ETHERNET_USE_RP2040          true

  #if defined(ETHERNET_USE_RPIPICO)
    #undef ETHERNET_USE_RPIPICO
  #endif
  #define ETHERNET_USE_RPIPICO      true
#else
  #error This code is intended to run on the RP2040 platform! Please check your Tools->Board setting.  
#endif

/////////////////////////////////

#if ETHERNET_USE_RPIPICO
  
  // Default pin 5 (in Mbed) or 17 to SS/CS
  #if defined(ARDUINO_ARCH_MBED)
    // For RPI Pico using Arduino Mbed RP2040 core
    // SCK: GPIO2,  MOSI: GPIO3, MISO: GPIO4, SS/CS: GPIO5
    
    #define USE_THIS_SS_PIN       17

    #if defined(BOARD_NAME)
      #undef BOARD_NAME
    #endif

    #if defined(ARDUINO_RASPBERRY_PI_PICO) 
      #define BOARD_TYPE      "MBED RASPBERRY_PI_PICO"
    #elif defined(ARDUINO_ADAFRUIT_FEATHER_RP2040)
      #define BOARD_TYPE      "MBED DAFRUIT_FEATHER_RP2040"
    #elif defined(ARDUINO_GENERIC_RP2040)
      #define BOARD_TYPE      "MBED GENERIC_RP2040"
    #else
      #define BOARD_TYPE      "MBED Unknown RP2040"
    #endif
    
  #else
  
    //#define USING_SPI2        true
    
    // For RPI Pico using E. Philhower RP2040 core
    #if (USING_SPI2)
      // SCK: GPIO14,  MOSI: GPIO15, MISO: GPIO12, SS/CS: GPIO13 for SPI1
      #define USE_THIS_SS_PIN       13
    #else
      // SCK: GPIO18,  MOSI: GPIO19, MISO: GPIO16, SS/CS: GPIO17 for SPI0
      #define USE_THIS_SS_PIN       17
    #endif

  #endif
   
  #define SS_PIN_DEFAULT        USE_THIS_SS_PIN

  // For RPI Pico
  #warning Use RPI-Pico RP2040 architecture

#endif

#ifndef BOARD_NAME
  #define BOARD_NAME    BOARD_TYPE
#endif

///////////////////////////////////////////
// Select Ethernet Library for the Shield
///////////////////////////////////////////

#include <SPI.h>

// To override the default CS/SS pin. Don't use unless you know exactly which pin to use
// You can define here or customize for each board at same place with BOARD_TYPE
// Check @ defined(SEEED_XIAO_M0)
//#define USE_THIS_SS_PIN   22  //21  //5 //4 //2 //15

// Only one if the following to be true
#define USE_ETHERNET_GENERIC  true
#define USE_ETHERNET_ESP8266  false 
#define USE_ETHERNET_ENC      false
#define USE_UIP_ETHERNET      false
#define USE_CUSTOM_ETHERNET   false
  
  ////////////////////////////
  
#if ( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC || USE_UIP_ETHERNET )
  #ifdef USE_CUSTOM_ETHERNET
    #undef USE_CUSTOM_ETHERNET
  #endif
  #define USE_CUSTOM_ETHERNET   false
#endif

#if USE_ETHERNET_GENERIC

  #define SHIELD_TYPE           "W5x00 using Ethernet_Generic Library on SPI0/SPI"

  #define ETHERNET_LARGE_BUFFERS

  #define _ETG_LOGLEVEL_                      1
  
  #include "Ethernet_Generic.h"
  #warning Using Ethernet_Generic lib

#elif USE_ETHERNET_ENC
  #include "EthernetENC.h"
  #warning Using EthernetENC lib
  #define SHIELD_TYPE           "ENC28J60 using EthernetENC Library"
  
#elif USE_CUSTOM_ETHERNET
  //#include "Ethernet_XYZ.h"
  #include "Ethernet.h"
  #warning Using Custom Ethernet library. You must include a library and initialize.
  #define SHIELD_TYPE           "Custom Ethernet using Ethernet Library"
  
#elif USE_UIP_ETHERNET
    #include "UIPEthernet.h"
    #warning Using UIPEthernet library
    #define SHIELD_TYPE           "ENC28J60 using UIPEthernet Library"  
    
#else
  #ifdef USE_ETHERNET_GENERIC
    #undef USE_ETHERNET_GENERIC
  #endif  
  #define USE_ETHERNET_GENERIC   true
  
  #include "Ethernet_Generic.h"
  #warning Using default Ethernet_Generic lib
  #define SHIELD_TYPE           "W5x00 using default Ethernet_Generic Library"

// Ethernet_Shield_W5200, EtherCard, EtherSia not supported
// Select just 1 of the following #include if uncomment #define USE_CUSTOM_ETHERNET
// Otherwise, standard Ethernet library will be used for W5x00
  
  ////////////////////////////

#endif      // #if USE_ETHERNET_GENERIC

/////////////////////////////////

#ifndef BOARD_NAME
  #ifdef ARDUINO_BOARD
    #define BOARD_NAME          ARDUINO_BOARD
  #else
    #define BOARD_NAME          BOARD_TYPE
  #endif
#endif

#ifndef SHIELD_TYPE
  #define SHIELD_TYPE           "Unknown shield"
#endif

/////////////////////////////////
#include <EthernetWebServer.h>  
#include <DDNS_Generic.h>

// Enter a MAC address and IP address for your controller below.
#define NUMBER_OF_MAC      20

byte mac[][NUMBER_OF_MAC] =
{
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x01 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x02 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x03 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x04 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x05 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x06 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x07 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x08 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x09 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0A },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0B },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0C },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0D },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0E },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0F },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x10 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x11 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x12 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x13 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x14 },
};

// Select the IP address according to your local network
IPAddress ip(192, 168, 2, 222);

/////////////////////////////////

#endif    //defines_h