RFBee_v1_1.pde

//  Firmware for rfBee 
//  see www.seeedstudio.com for details and ordering rfBee hardware.

//  Copyright (c) 2010 Hans Klunder <hans.klunder (at) bigfoot.com>
//  Author: Hans Klunder, based on the original Rfbee v1.0 firmware by Seeedstudio
//  Version: July 14, 2010
//
//  This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License
//  as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
//
//  This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; 
//  without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
//  See the GNU General Public License for more details.
//
//  You should have received a copy of the GNU General Public License along with this program; 
//  if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA



#define FIRMWAREVERSION 11 // 1.1  , version number needs to fit in byte (0~255) to be able to store it into config
//#define FACTORY_SELFTES
#define DEBUG


#include "debug.h"
#include "globals.h"
#include "Config.h"
#include "CCx.h"
#include "rfBeeSerial.h"

#ifdef FACTORY_SELFTEST
#include "TestIO.h"  // factory selftest
#endif

#define GDO0 2 // used for polling the RF received data


void setup(){
    if (Config.initialized() != OK)
    {
      Serial.begin(38400);
      Serial.println("Initializing config");
#ifdef FACTORY_SELFTEST
      if ( TestIO() != OK )
        return;
#endif
      Config.reset();
    }
    Serial.begin(38400);
    rfBeeInit();

    Serial.println("Receive mode...");
    CCx.Strobe(CCx_SIDLE);
    delay(1);
    CCx.Write(CCx_MCSM1 ,   0x0C );//RXOFF_MODE->stay in RX
    CCx.Strobe(CCx_SFRX);
    CCx.Strobe(CCx_SRX);
}

void loop(){

  //copy the digital value on PD2 to PD5
  pinMode(2, INPUT);  //input on PD2
  pinMode(19, OUTPUT); //output on PD5

  int val;
  while(1) {
    val = digitalRead(2);
    digitalWrite(19, val);
  }
}


void rfBeeInit(){
    DEBUGPRINT()

    CCx.PowerOnStartUp();
    setCCxConfig();

    serialMode=SERIALDATAMODE;
    sleepCounter=0;

    //attachInterrupt(0, ISRVreceiveData, RISING);  //GD00 is located on pin 2, which results in INT 0

    pinMode(GDO0,INPUT);// used for polling the RF received data

}

// handle interrupt
void ISRVreceiveData(){
  //DEBUGPRINT()
  sleepCounter=10;
}