Raspberrymatic startet nicht mehr unter Home Assistant Yellow.

[nG64]

Describe the issue you are experiencing

Seit dem letzten HA Core Update will meine Raspberrymatic nicht mehr . HA Yellow findet meinen HMIP-RFUSB Stick, in den Logs der Raspberrymatic CCU kommt immer wieder das Protokoll:

Identifying host system: Raspberry Pi Compute Module 4 Rev 1.1 (oci), OK
Initializing RTC Clock: onboard, OK
Running sysctl: OK
Checking for Factory Reset: not required
Checking for Backup Restore: not required
Running seedrng: OK
Initializing System: OK
Setup ca-certificates: OK
Starting logging: OK
Init onboard LEDs: init, OK
Starting iptables: OK
Starting network: eth0: link up, fixed, firewall, inet up, 172.30.33.2, OK
Identifying Homematic RF-Hardware: ....HmRF: HMIP-RFUSB/eQ-3 [email protected], HmIP: HMIP-RFUSB/eQ-3 [email protected], OK
Updating Homematic RF-Hardware: HMIP-RFUSB: 4.4.18, not necessary, OK
Starting hs485dLoader: disabled
Starting xinetd: OK
Starting eq3configd: OK
Starting lighttpd: OK
Starting ser2net: disabled
Starting ssdpd: OK
Starting ha-proxy: OK
Starting NUT services: disabled
Initializing Third-Party Addons: OK
Starting LGWFirmwareUpdate: not required
Setting LAN Gateway keys: not required
Starting hs485d: disabled
Starting multimacd: ..............ERROR
Starting rfd: ....................ERROR
Starting HMIPServer: .......................................................................................................................................................ERROR
Starting ReGaHss: .OK
Starting CloudMatic: OK
Starting NeoServer: disabled
Starting Third-Party Addons: OK
Starting crond: OK
Setup onboard LEDs: booted, OK
Finished Boot: 3.79.6.20250220 (raspmatic_oci_arm64)
Setup onboard LEDs: shutdown, OK
Stopping crond: OK
Stopping Third-Party Addons: OK
Stopping NeoServer: OK
Stopping ReGaHss: ......OK
Stopping HMIPServer: OK
start-stop-daemon: warning: killing process 1188: No such process
Stopping rfd: OK
Stopping multimacd: OK
Stopping hs485d: OK
Stopping NUT services: OK
Stopping ha-proxy: OK
Stopping sshd: OK
Stopping ssdpd: OK
Shutting down ser2net: OK
Stopping lighttpd: OK
Stopping eq3configd: OK
Stopping xinetd: OK
Stopping network: eth0: link down, OK
Stopping iptables: OK
Stopping logging: OK
Cleaning up System: OK
Running seedrng: OK
Cleaning up RTC Clock: OK

The system is going down NOW!

Sent SIGTERM to all processes

Sent SIGKILL to all processes

Requesting system reboot

Interface Raspi-HmIP-RF nicht erreichbar
Warnung ⸱ Von Homematic(IP) Local gemeldet
Keine Verbindung zu Schnittstelle Raspi-HmIP-RF.

Home Assistant Core
von Home Assistant
Version: 2025.3.0b3

Home Assistant Operating System
von Home Assistant
Version: 15.0.rc1

Home Assistant Supervisor
von Home Assistant
Version: 2025.03.2

Describe the behavior you expected

Laufen wie vor dem Update..

Steps to reproduce the issue

1HA Neu starten
2.
3.
...

What is the version this bug report is based on?

3.79.6.20250220

Which base platform are you running?

ha-addon (HomeAssistant Add-on)

Which HomeMatic/homematicIP radio module are you using?

HmIP-RFUSB

Anything in the logs that might be useful for us?

Subsystem:
usb
Gerätepfad:
/dev/bus/usb/001/003
Attribute:
BUSNUM: '001'
DEVNAME: /dev/bus/usb/001/003
DEVNUM: '003'
DEVPATH: /devices/platform/soc/fe980000.usb/usb1/1-1/1-1.2
DEVTYPE: usb_device
DRIVER: usb
ID_BUS: usb
ID_FOR_SEAT: usb-platform-fe980000_usb-usb-0_1_2
ID_MODEL: eQ-3_HmIP-RFUSB
ID_MODEL_ENC: eQ-3\x20HmIP-RFUSB
ID_MODEL_ID: c020
ID_PATH: platform-fe980000.usb-usb-0:1.2
ID_PATH_TAG: platform-fe980000_usb-usb-0_1_2
ID_PATH_WITH_USB_REVISION: platform-fe980000.usb-usbv2-0:1.2
ID_REVISION: '0100'
ID_SERIAL: Silicon_Labs_eQ-3_HmIP-RFUSB_3014F711A0000420C9A1871E
ID_SERIAL_SHORT: 3014F711A0000420C9A1871E
ID_USB_INTERFACES: ':ff0000:'
ID_USB_MODEL: eQ-3_HmIP-RFUSB
ID_USB_MODEL_ENC: eQ-3\x20HmIP-RFUSB
ID_USB_MODEL_ID: c020
ID_USB_REVISION: '0100'
ID_USB_SERIAL: Silicon_Labs_eQ-3_HmIP-RFUSB_3014F711A0000420C9A1871E
ID_USB_SERIAL_SHORT: 3014F711A0000420C9A1871E
ID_USB_VENDOR: Silicon_Labs
ID_USB_VENDOR_ENC: Silicon\x20Labs
ID_USB_VENDOR_ID: 1b1f
ID_VENDOR: Silicon_Labs
ID_VENDOR_ENC: Silicon\x20Labs
ID_VENDOR_ID: 1b1f
MAJOR: '189'
MINOR: '2'
PRODUCT: 1b1f/c020/100
SUBSYSTEM: usb
TAGS: ':seat:'
TYPE: 0/0/0
USEC_INITIALIZED: '7629091'

Additional information

No response

[jens-maus]

Das Problem ist nicht das HA Core Update das du erwähnst. Das Problem ist, das du auf eine experimentelle 15.0rc1 Version von HomeAssistantOS setzt und diese anscheinend gegenüber 14.2 Änderungen beinhaltet die die von dir gezeigten Probleme verursachen.

Siehe
home-assistant/operating-system#3915

D.h. geh zurück auf die offiziell stabile 14.2 und das Problem sollte weg sein.

[github-actions]

@nG64, the issue you reported cannot be solved within this project or should be better directly solved in a third-party project RaspberryMatic just uses. So please consider creating an additional issue ticket in this third-party project. If still relevant we can keep this issue ticket open here for the time being so that you can use it as a reference in issue tickets for the third-party report.

[nG64]

Ah perfekt, danke für die schnelle Hilfe !!

[nG64]

@jens-maus Vielen Dank. Jetzt läuft es wieder :)

[jens-maus]

@jens-maus Vielen Dank. Jetzt läuft es wieder :)

Sehr gut, dann bleib auf der 14.2 und nehm davon abstand experimentelle Versionen von release candidates (rcX) oder beta versionen (du hast auch 2025.3.0b3 installiert) auf deinem Produktivsystem zu nutzen...

[Baxxy13]

HA-Core und HA-Supervisor sind hier tatsächlich mal "unschuldig".
Das Problem kommt von HA-OS 15.0rcx.