RaspberryMatic 3.65.6.20220723

[jens-maus]

This is release 3.65.6.20220723 of RaspberryMatic which is a major release with the following bugfixes and feature changes:

_{Hier klicken für deutschsprachige 🇩🇪🇦🇹🇨🇭 Version des ChangeLogs/Diskussionsbeitrag}

🚧 Changes:

_{For all changes, see the full commit log.}

CCU/HomeMatic service changes:

• updated OCCU version to 3.65.6-3 which comes with the following changes:
  • updated ReGaHss logic engine to version R1.00.0388.0232 (Jun 27 2022) coming with the following changes:
    • fixed a potential integer overflow bug when calculating the next free object id which could end up allocating negative ids.
  • dialog after Homematic device firmware update corrected.
  • HmIP-SWSD: The configuration parameter "Forward received data telegrams" was not correctly transferred to the device.
  • a memory error in the Homematic interface process (rfd) has been fixed.
  • HmIP-STE2-PCB (ELV kit): The status of the configuration parameter "Minimum transmit distance" was always displayed as "Not active".
  • For HmIP motion detectors, a second brightness threshold has been introduced for links has been introduced. The first brightness threshold, for example, switches the light on when a detected movement if the brightness falls below a certain level. As a result
    it may become so bright that subsequent movements are no longer detected. The second brightness value forms the threshold for retriggering when the light is switched on.
  • The description of the programs has been changed as follows (example): Before: "...System state: presence, trigger on change, not present". New: "...System state: presence, trigger when not present, trigger when changed".
  • HmIP-WKP - Den Benutzerkanälen wurden innerhalb von Programmen 2 neue Parameter hinzugefügt, die es erlauben, auf die Tasten „Verriegeln/Entriegeln“ zu reagieren.
  • For channels of type "Configuration decision value" (e.g. HmIP-PSM channel 7) it is now possible to enter the now possible to enter the lower and upper limit value with decimal place.
  • HmIP-WRCD (ELV kit) - Note text for the allowed special characters extended.
• when creating backups of a running "RaspberryMatic CCU" Add-on within HomeAssistant the .watchdog file will now be excluded from the backup so that upon restore no unclean-shutdown alarm message will be issued (cf. https://homematic-forum.de/forum/viewtopic.php?p=725274#p725274). In addition, before creating the backup, ReGaHss will now be instructed to flush its current settings to disk, so that also the consistency of a HA driven backup of the Add-on should be slightly improved.
• modified the recovery system to add a user-configured static ip address as a secondary ip address to the main network interface. Thus, now the recovery system will also be available on the static ip address a user has defined in the main CCU WebUI, but also (for recovery reasons) use a DHCP acquired IP address (Ausgabe des Automatischen Update benutzt DHCP anstatt der festen IP Adresse #1862).

WebUI changes:

• added a new 0169-WebUI-Fix-HmIP-HAP-B1 WebUI patchset which integrates changes to make a HmIP-HAP-B1 access point to be integrated correctly in the WebUI like a standard HmIP-HAP (cf. https://homematic-forum.de/forum/viewtopic.php?f=60&t=74759&p=724648#p724648).
• changed updateDCVars.tcl to catch potential HmIP-HAP subtypes as well (cf. https://homematic-forum.de/forum/viewtopic.php?p=724644#p724477).
• added bugfix in 0157-WebUI-Fix-WrongJSONQuotes WebUI patchset which should allow to create a system variable as "internal", which was previously not possible (cf. JSON API SysVar.createEnum will always be internal eq-3/occu#119).
• updated 0157-WebUI-Fix-WrongJSONQuotes WebUI patch to integrate more JSON related quoting fixes and also modify the SysVar.* json methods to make sure that all these apply to system variable objects only and not generally to all objects throughout ReGaHss, such as programs, devices, etc. (cf. JSON API SysVar.setEnum is not working as expected eq-3/occu#117, JSON API SysVar.deleteSysVarByName only softdeletes eq-3/occu#118).
• forced lighttpd webserver into server.network-backend="writev" mode which fixes certain issues with stalling WebUI backup downloads (cf. https://homematic-forum.de/forum/viewtopic.php?f=65&t=74631&start=110#p725332).

Operating system changes:

• updated tailscale to latest 1.28.0
• updated upstream kernel to 5.15.55 LTS.
• removed obsolete net.ipv4.tcp_timestamps network tuning because newer linux kernel automatically randomize timestamps for improved security and potential network spike reduction does not justify to disable timestamps altogether anymore (cf. https://security.stackexchange.com/questions/111794/pros-and-cons-of-disabling-tcp-timestamps).
• added a fix/workaround for wiping compromised default/leftover data in S50sshd.

👪 Contributors (alphabetically):

• @jens-maus

📝 Support:

For support on installation and help please visit the following web pages:

RaspberryMatic - Documentation 🇺🇸
RaspberryMatic - Discussions 🇺🇸
RaspberryMatic - Dokumentation 🇩🇪
RaspberryMatic - Forum 🇩🇪

📦 Download:

The following installation archives can be downloaded for different hardware platforms. To verify their integrity a sha256 checksum is provided as well. You can either upload these files using the WebUI-based update mechanism or unarchive them to e.g. flash the included *.img files on a fresh installation media (e.g. microSD card):

• RaspberryPi4 Model B, RaspberryPi Compute Module 4, RaspberryPi 400 – (installation):
  _{📦 RaspberryMatic-3.65.6.20220723-rpi4.zip
  SHA256: 63634b27b6f9ab90a5e6968518cc194e989a6cb39a00d7e3b75e36a562a20266}

• CCU3, ELV-Charly, RaspberryPi3 Model B+, RaspberryPi3 Model B, RaspberryPi3 Model A+, RaspberryPi Compute Module 3, RaspberryPi Compute Module 3 lite, RaspberryPi Zero 2 W – (installation):
  _{📦 RaspberryMatic-3.65.6.20220723-rpi3.zip
  SHA256: ffdc64424d273007f1d5a50f3acdfe6bc5b6d73edafe397c8f38538b0b336aed
  📦 RaspberryMatic-3.65.6.20220723-ccu3.tgz (only for initial CCU3 Firmware -> RaspberryMatic Upgrade)
  SHA256: 7eb2eb4afebb08d52bf1a39d27c2ec400a69aa559aaa0721f5ee0ac51a63cb59}

• RaspberryPi2 Model B – (installation):
  _{📦 RaspberryMatic-3.65.6.20220723-rpi2.zip
  SHA256: 07d8a0696060ecaeab06df95997e32da1d010d92a47530f13fa502ffe8bf852c}

• RaspberryPi Zero W, RaspberryPi Zero, RaspberryPi Compute Module 1, RaspberryPi1 (A+/B+) – (installation):
  _{📦 RaspberryMatic-3.65.6.20220723-rpi0.zip
  SHA256: 5ecfcc5f29c36586dffa08ac1602eafed7b6ef3515e5bc2cf24d9a0752a95faf}

• TinkerBoard S, TinkerBoard – (installation):
  _{📦 RaspberryMatic-3.65.6.20220723-tinkerboard.zip
  SHA256: d035b50be335db854e892923c1e1e04ec0bf8b4ec76c2e20aa8efdfa0f941eae}

• ODROID-N2/N2+/C4/C2 – (installation):
  _{📦 RaspberryMatic-3.65.6.20220723-odroid-n2.zip
  SHA256: 7e71a0ba4d4711597255e68c5866714e8b95bb46afa7f0736855170d80143519
  📦 RaspberryMatic-3.65.6.20220723-odroid-c4.zip
  SHA256: b72d8d8eca309a19623bdb283b124a9caeb3c55b0cf4aea620180d0daf5b8eda
  📦 RaspberryMatic-3.65.6.20220723-odroid-c2.zip
  SHA256: b53172a8a85036d06ba6e0b85c0dc9b25ed99630643b9fa2451014c8eb035f0f}

• Intel NUC – (installation):
  _{📦 RaspberryMatic-3.65.6.20220723-intelnuc.zip
  SHA256: e800b5a8507214808321cbb5521fe49be78a3b2560bb51a94ed22e32f97bc53c}

• Open Virtual Appliance (OVA) – (ProxmoxVE, VirtualBox, ESXi, Synology, QNAP, Workstation Player, QEmu, UNRAID, HyperV):
  _{📦 RaspberryMatic-3.65.6.20220723-ova.zip
  SHA256: 52528cf383921338429477199933eae1186cfc6d08c18decae096a4b71864b69
  📦 RaspberryMatic-3.65.6.20220723.ova (only for initial OVA installation)
  SHA256: 02bc15ccaf235bbf6efc2720301e95b1c53b5015f001259a0eb059bb7d7ec586}

• Docker / Open Container Initiative (OCI) – virtual appliance (installation):
  _{📦 RaspberryMatic-3.65.6.20220723-oci_amd64.tgz (amd64/x86_64)
  SHA256: fbd170c529ba02653c1eb8fa002fb3d7d13f4ad494a608430bbad0a736b08bea
  📦 RaspberryMatic-3.65.6.20220723-oci_arm64.tgz (arm64/aarch64)
  SHA256: 9a00751699c7e27b47924f3a624ebc8e718265394098d977be9cc055cf14161f
  📦 RaspberryMatic-3.65.6.20220723-oci_arm.tgz (arm/armhf)
  SHA256: 089147950c26a7ad41c0ed01927ea1540e5023f2e9ba3d6fd0207f160e9b7110}

• Kubernetes / K8s – virtual appliance:
  _{see install documentation}

• Home Assistant Add-on – virtual appliance:
  _{see install documentation}

---

This discussion was created from the release RaspberryMatic 3.65.6.20220723.