NSpanel color wheel script problem #1

nicoCRX · 2022-03-16T16:03:25Z

Hello,
I ve use your template to create my own interface for my NSpanel. Thank you for sharing your project.
I just have one problem : I don't understand this part:

  - platform: nextion
    name: $device_name Color Wheel
    page_id: 1
    component_id: 18
    internal: true
    on_release:
      then:
        - lambda: |-
            id(color_wheel_x).update();
            id(color_wheel_y).update();
        - delay: 20ms
        - lambda: |-
            RgbColor color = posToColor(id(color_wheel_x).state, id(color_wheel_y).state);
            id(selected_color_red) = String(color.r);
            id(selected_color_green) = String(color.g);
            id(selected_color_blue) = String(color.b);
        - homeassistant.service:
            service: script.set_light_rgb
            data:
              light_name: $target_lights
              red: !lambda 'return id(selected_color_red).c_str();'
              green: !lambda 'return id(selected_color_green).c_str();'
              blue: !lambda 'return id(selected_color_blue).c_str();'

You are calling a service script ? I have to create a script in my home assistant but with what elements ?

thx

The text was updated successfully, but these errors were encountered:

ilyavolodin · 2022-03-16T20:19:38Z

Ah, yes, sorry, I forgot to check that script in. Problem is that ESPHome can't send an array of numbers to home assistant service, so you have to create a script that would accept those numbers as separate attributes. Here's the script:

alias: ESPHome RGB light set
sequence:
  - service: light.turn_on
    data_template:
      entity_id: '{{ light_name }}'
      rgb_color:
        - '{{ red }}'
        - '{{ green }}'
        - '{{ blue }}'
mode: single

nicoCRX · 2022-03-17T20:57:06Z

Ok. I'll try this
Thanks

ckegels · 2022-07-31T13:55:48Z

i tried this but it doesn't seem to work.
pretty new to all this so im very sorry.

i just added this to a script in home assistant but i dont seem to receive the values
(the script should be called set_light_rgb) right?

ilyavolodin · 2022-07-31T14:00:03Z

You could add some logging to the ESPHome script to see if you are getting back values from the C++ code, but other then that, it should work. Just heads up, I'm reasonably sure that there's a memory leak somewhere in C++ code, because NSPanel starts rebooting itself after a period of time when using this code. Unfortunately, I gave up on NSPanel and moved on to using Wink Relay instead, so I'm not planning on trying to fix it.

ckegels · 2022-07-31T14:47:35Z

So after adding logging and figuring out that the vallues werent correct (always 255) i was able to solve that however i still cant pass the values onto home assistant. pretty sure its a service/ script issue.
do i understand it correct that i just have to go into my scripts.yaml on home assistant and i can copy paste in your code ?
with a script name of set_light_rgb ?

ckegels · 2022-07-31T14:51:43Z

i seemed to have had an issue with using the yaml file.
made the automation in gui and than changed the vallues in yaml

now it works like a charm.
thank you good sir

ilyavolodin · 2022-07-31T19:16:39Z

Yeah, I haven't tried doing it in yaml files, but instead, just created a script in the UI.

adrianGOO · 2022-12-09T23:21:09Z

alias: ESPHome RGB light set
sequence:

service: light.turn_on
data_template:
entity_id: '{{ light_name }}'
rgb_color:
- '{{ red }}'
- '{{ green }}'
- '{{ blue }}'
mode: single

How did you resolve the issue with wheel?

I am stuck on RGB wheel and can not find the solution.

ckegels · 2022-12-09T23:25:39Z

can't remember exactly what i did, just remember it was something stupid with the ui/yaml it didnt work for me when just using the yaml but somehow doing it yaml and ui worked:

i hope the image helps

adrianGOO · 2022-12-10T00:07:59Z

can't remember exactly what i did, just remember it was something stupid with the ui/yaml it didnt work for me when just using the yaml but somehow doing it yaml and ui worked:

i hope the image helps

I have already added the script but still nothing here, the wheel not changing the colours.
the dimmer and brightness controllers are working somehow but the wheel is not changing colours.

I am designing the panel for my needs but I am still missing the RGB controller to make it perfect for my room.

ckegels · 2022-12-10T00:12:13Z

dimmer/brightness are completely seperate from the color wheel,

ok so what i did when i couldnt figure this out is that i built some log debugging to try and find where the problem was.
i logged the vallues or red, green, blue in esphome etc

this is my code for the binary sensor, i added some logging (atleast i think i added it, maybe it was allready there)

#color wheel
  - platform: nextion
    name: $device_name Color Wheel
    page_id: 6
    component_id: 13
    internal: true
    on_press:
      then:
        - script.stop: my_timer
    on_release:
      then:
        - lambda: |-
            id(color_wheel_x).update();
            id(color_wheel_y).update();
        - delay: 20ms
        - lambda: |-
            RgbColor color = posToColor(id(color_wheel_x).state, id(color_wheel_y).state);
            id(selected_color_red2) = String(color.r);
            id(selected_color_green2) = String(color.g);
            id(selected_color_blue2) = String(color.b);
        - logger.log:
            format: "RGB RED VALUE: %s"
            args: [ 'id(selected_color_red2).c_str()']
        - logger.log:
            format: "RGB GREEN VALUE: %s"
            args: [ 'id(selected_color_green2).c_str()']
        - logger.log:
            format: "RGB BLUE VALUE: %s"
            args: [ 'id(selected_color_blue2).c_str()']
        - homeassistant.service:
            service: script.set_light_rgb
            data:
              light_name: $target_lights
              red: !lambda 'return id(selected_color_red2).c_str();'
              green: !lambda 'return id(selected_color_green2).c_str();'
              blue: !lambda 'return id(selected_color_blue2).c_str();'
        - script.execute: my_timer

ckegels · 2022-12-10T00:17:24Z

you didnt forget to add the colorwheel file to the esphome root directory right?

adrianGOO · 2022-12-10T00:20:53Z

same script here but not responding.

#color wheel

platform: nextion
name: $device_name Color Wheel
page_id: 6
component_id: 13
internal: true
on_press:
then:
- script.stop: my_timer
on_release:
then:
- lambda: |-
id(color_wheel_x).update();
id(color_wheel_y).update();
- delay: 20ms
- lambda: |-
RgbColor color = posToColor(id(color_wheel_x).state, id(color_wheel_y).state);
id(selected_color_red2) = String(color.r);
id(selected_color_green2) = String(color.g);
id(selected_color_blue2) = String(color.b);
- logger.log:
format: "RGB RED VALUE: %s"
args: [ 'id(selected_color_red2).c_str()']
- logger.log:
format: "RGB GREEN VALUE: %s"
args: [ 'id(selected_color_green2).c_str()']
- logger.log:
format: "RGB BLUE VALUE: %s"
args: [ 'id(selected_color_blue2).c_str()']
- homeassistant.service:
service: script.set_light_rgb
data:
light_name: $target_lights
red: !lambda 'return id(selected_color_red2).c_str();'
green: !lambda 'return id(selected_color_green2).c_str();'
blue: !lambda 'return id(selected_color_blue2).c_str();'
- script.execute: my_timer

No it is already there

ckegels · 2022-12-10T00:22:00Z

same script here but not responding.

#color wheel

platform: nextion
name: $device_name Color Wheel
page_id: 6
component_id: 13
internal: true
on_press:
then:

script.stop: my_timer
on_release:
then:

lambda: |-
id(color_wheel_x).update();
id(color_wheel_y).update();

delay: 20ms

lambda: |-
RgbColor color = posToColor(id(color_wheel_x).state, id(color_wheel_y).state);
id(selected_color_red2) = String(color.r);
id(selected_color_green2) = String(color.g);
id(selected_color_blue2) = String(color.b);

logger.log:
format: "RGB RED VALUE: %s"
args: [ 'id(selected_color_red2).c_str()']

logger.log:
format: "RGB GREEN VALUE: %s"
args: [ 'id(selected_color_green2).c_str()']

logger.log:
format: "RGB BLUE VALUE: %s"
args: [ 'id(selected_color_blue2).c_str()']

homeassistant.service:
service: script.set_light_rgb
data:
light_name: $target_lights
red: !lambda 'return id(selected_color_red2).c_str();'
green: !lambda 'return id(selected_color_green2).c_str();'
blue: !lambda 'return id(selected_color_blue2).c_str();'

script.execute: my_timer

No it is already there

so the vallues are showing in the logger?

adrianGOO · 2022-12-10T00:31:58Z

To tell you the truth I am trying to integrate it to the EU version so I am suspecting that I am missing any point that is confusing me because this is the first week I am using ESPHome with Nextion editor.
Every code I have used is copy paste in combination with my logic :(

######################################################
substitutions:
  # Name the device and it's entities
  device_name: nspanel-dev
  wifi_ssid: !secret wifi_ssid
  wifi_pass: !secret wifi_password
  tft_url: !secret tft_upload_url
  target_lights: light.room_lamp_rgb

# global varibles.
globals:
  - id: selected_color_red
    type: String
  - id: selected_color_green
    type: String
  - id: selected_color_blue
    type: String

############Binary#############
### RGB CONTROLER ##################

  - platform: nextion
    name: $device_name Brightness Slider
    page_id: 9
    component_id: 2
    internal: true
    on_release:
      then:
        - lambda: !lambda |-
            id(brightness_value).update();
  
  - platform: nextion
    name: $device_name Color Wheel
    page_id: 9
    component_id: 17
    internal: true
    on_release:
      then:
        - lambda: |-
            id(color_wheel_x).update();
            id(color_wheel_y).update();
        - delay: 20ms
        - lambda: |-
            RgbColor color = posToColor(id(color_wheel_x).state, id(color_wheel_y).state);
            id(selected_color_red) = String(color.r);
            id(selected_color_green) = String(color.g);
            id(selected_color_blue) = String(color.b);
        - homeassistant.service:
            service: script.yeelight_hsv_mode
            data:
              light_name: $target_lights
              red: !lambda 'return id(selected_color_red).c_str();'
              green: !lambda 'return id(selected_color_green).c_str();'
              blue: !lambda 'return id(selected_color_blue).c_str();'
              
  - platform: nextion
    name: $device_name Color Temp Slider
    page_id: 9
    component_id: 12
    internal: true

######### RGB SENSOR ##################
########################################
  - platform: homeassistant
    id: current_brightness
    entity_id: $target_lights
    attribute: brightness
    on_value:
      then:
        - lambda: 'id(disp1).send_command_printf("brightnessVal.val=%i", (int)x);'
        
  - platform: homeassistant
    id: current_color_temp
    entity_id: $target_lights
    attribute: color_temp
    on_value:
      then:
        - lambda: 'id(disp1).send_command_printf("tempSlider.val=%i", (int)x);'
        
  - platform: nextion
    id: brightness_value
    component_name: brightnessVal
    on_value:
      then:
        - homeassistant.service:
            service: light.turn_on
            data:
              entity_id: $target_lights
              brightness: !lambda 'return (int)x;'
            
  - platform: nextion
    id: color_temp_value
    component_name: tempSlider
    on_value:
      then:
        - homeassistant.service:
            service: light.turn_on
            data:
              entity_id: $target_lights
              color_temp: !lambda 'return (int)x;'

  - platform: nextion
    id: color_wheel_x
    component_name: selectedColorX
    filters:
      - offset: -27
            
  - platform: nextion
    id: color_wheel_y
    component_name: selectedColorY
    filters:
      - offset: -91
    on_release:
      then:
        - lambda: !lambda |-
            id(color_temp_value).update();

its just a timer to turn off the display

Do I have to create a timer because I not using any timer?

ckegels · 2022-12-10T00:34:22Z

To tell you the truth I am trying to integrate it to the EU version so I am suspecting that I am missing any point that is confusing me because this is the first week I am using ESPHome with Nextion editor. Every code I have used is copy paste in combination with my logic :(

###################################################### substitutions:

Name the device and it's entities

device_name: nspanel-dev wifi_ssid: !secret wifi_ssid wifi_pass: !secret wifi_password tft_url: !secret tft_upload_url target_lights: light.room_lamp_rgb

global varibles.

globals:

id: selected_color_red
type: String

id: selected_color_green
type: String

id: selected_color_blue
type: String

############Binary#############

RGB CONTROLER

platform: nextion
name: $device_name Brightness Slider
page_id: 9
component_id: 2
internal: true
on_release:
then:

lambda: !lambda |-
id(brightness_value).update();

platform: nextion
name: $device_name Color Wheel
page_id: 9
component_id: 17
internal: true
on_release:
then:

lambda: |-
id(color_wheel_x).update();
id(color_wheel_y).update();

delay: 20ms

lambda: |-
RgbColor color = posToColor(id(color_wheel_x).state, id(color_wheel_y).state);
id(selected_color_red) = String(color.r);
id(selected_color_green) = String(color.g);
id(selected_color_blue) = String(color.b);

homeassistant.service:
service: script.yeelight_hsv_mode
data:
light_name: $target_lights
red: !lambda 'return id(selected_color_red).c_str();'
green: !lambda 'return id(selected_color_green).c_str();'
blue: !lambda 'return id(selected_color_blue).c_str();'

platform: nextion
name: $device_name Color Temp Slider
page_id: 9
component_id: 12
internal: true

######### RGB SENSOR ################## ########################################

platform: homeassistant
id: current_brightness
entity_id: $target_lights
attribute: brightness
on_value:
then:

lambda: 'id(disp1).send_command_printf("brightnessVal.val=%i", (int)x);'

platform: homeassistant
id: current_color_temp
entity_id: $target_lights
attribute: color_temp
on_value:
then:

lambda: 'id(disp1).send_command_printf("tempSlider.val=%i", (int)x);'

platform: nextion
id: brightness_value
component_name: brightnessVal
on_value:
then:

homeassistant.service:
service: light.turn_on
data:
entity_id: $target_lights
brightness: !lambda 'return (int)x;'

platform: nextion
id: color_temp_value
component_name: tempSlider
on_value:
then:

homeassistant.service:
service: light.turn_on
data:
entity_id: $target_lights
color_temp: !lambda 'return (int)x;'

platform: nextion
id: color_wheel_x
component_name: selectedColorX
filters:

offset: -27

platform: nextion
id: color_wheel_y
component_name: selectedColorY
filters:

offset: -91
on_release:
then:

lambda: !lambda |-
id(color_temp_value).update();

you added in the extra line in the editor for the eu version if i remember corretly you have to add something, i dont actuelly use a ns panel so i am not sure (i use a nextion display with esp32)

adrianGOO · 2022-12-10T00:37:46Z

Yes you are right I added extra page that I exported from yliavolodin HMI and imported to EU version HMI.

ckegels · 2022-12-10T00:38:06Z

what is that on release at the end? it seems very out of place,
btw don't worry about not understanding it, neither do i. and i am very aware i am not the right person to help but i will try.
i myself started my project by copy pasting and adding code to that. after a while you will be able to make your own things.

ckegels · 2022-12-10T00:40:49Z

Yes you are right I added extra page that I exported from yliavolodin HMI and imported to EU version HMI.

the extra line in the program.s

but please try to start the display and tap arround on the colorwheel you need to figure out if the esphome is even getting color vallues and check the logs for these (make sure they are not all the same)

adrianGOO · 2022-12-10T00:41:33Z

what is that on release at the end? it seems very out of place, btw don't worry about not understanding it, neither do i. and i am very aware i am not the right person to help but i will try. i myself started my project by copy pasting and adding code to that. after a while you will be able to make your own things.

you mean this part?

offset: -27
platform: nextion
id: color_wheel_y
component_name: selectedColorY
filters:

offset: -91
on_release:
then:

I tried also without minus also with minus but still same. Sometimes when I am not sure what I am doind I simply try every option heheheh

ckegels · 2022-12-10T00:43:01Z

what is that on release at the end? it seems very out of place, btw don't worry about not understanding it, neither do i. and i am very aware i am not the right person to help but i will try. i myself started my project by copy pasting and adding code to that. after a while you will be able to make your own things.

you mean this part?

offset: -27 platform: nextion id: color_wheel_y component_name: selectedColorY filters:

offset: -91 on_release: then:

I tried also without minus also with minus but still same. Sometimes when I am not sure what I am doind I simply try every option heheheh

yea what is the on release doing there? its a sensor not a binary sensor, to me that seems wrong. why is it there?
where does it come from?

also please format your code correctly on here, i cant tell if spacing is wrong, because yes that matters.

ckegels · 2022-12-10T00:46:27Z

To tell you the truth I am trying to integrate it to the EU version so I am suspecting that I am missing any point that is confusing me because this is the first week I am using ESPHome with Nextion editor. Every code I have used is copy paste in combination with my logic :(

###################################################### substitutions:

Name the device and it's entities

device_name: nspanel-dev wifi_ssid: !secret wifi_ssid wifi_pass: !secret wifi_password tft_url: !secret tft_upload_url target_lights: light.room_lamp_rgb

global varibles.

globals:

id: selected_color_red
type: String

id: selected_color_green
type: String

id: selected_color_blue
type: String

############Binary#############

RGB CONTROLER

platform: nextion
name: $device_name Brightness Slider
page_id: 9
component_id: 2
internal: true
on_release:
then:

lambda: !lambda |-
id(brightness_value).update();

platform: nextion
name: $device_name Color Wheel
page_id: 9
component_id: 17
internal: true
on_release:
then:

lambda: |-
id(color_wheel_x).update();
id(color_wheel_y).update();

delay: 20ms

lambda: |-
RgbColor color = posToColor(id(color_wheel_x).state, id(color_wheel_y).state);
id(selected_color_red) = String(color.r);
id(selected_color_green) = String(color.g);
id(selected_color_blue) = String(color.b);

homeassistant.service:
service: script.yeelight_hsv_mode
data:
light_name: $target_lights
red: !lambda 'return id(selected_color_red).c_str();'
green: !lambda 'return id(selected_color_green).c_str();'
blue: !lambda 'return id(selected_color_blue).c_str();'

platform: nextion
name: $device_name Color Temp Slider
page_id: 9
component_id: 12
internal: true

######### RGB SENSOR ################## ########################################

platform: homeassistant
id: current_brightness
entity_id: $target_lights
attribute: brightness
on_value:
then:

lambda: 'id(disp1).send_command_printf("brightnessVal.val=%i", (int)x);'

platform: homeassistant
id: current_color_temp
entity_id: $target_lights
attribute: color_temp
on_value:
then:

lambda: 'id(disp1).send_command_printf("tempSlider.val=%i", (int)x);'

platform: nextion
id: brightness_value
component_name: brightnessVal
on_value:
then:

homeassistant.service:
service: light.turn_on
data:
entity_id: $target_lights
brightness: !lambda 'return (int)x;'

platform: nextion
id: color_temp_value
component_name: tempSlider
on_value:
then:

homeassistant.service:
service: light.turn_on
data:
entity_id: $target_lights
color_temp: !lambda 'return (int)x;'

platform: nextion
id: color_wheel_x
component_name: selectedColorX
filters:

offset: -27

platform: nextion
id: color_wheel_y
component_name: selectedColorY
filters:

offset: -91
on_release:
then:

lambda: !lambda |-
id(color_temp_value).update();

i noticed your code has no debugging please look at the code i posted and add that in to see the rgb vallues

adrianGOO · 2022-12-10T00:50:33Z

What code you are using on our script my_timer?

ckegels · 2022-12-10T00:52:58Z

its just a timer to turn off the display

ckegels · 2022-12-10T01:03:21Z

also just checking but you didnt forget to add the includes right?

esphome:
  name: $device_name
  includes:
    - colorwheel.h

adrianGOO · 2022-12-10T01:08:29Z

also just checking but you didnt forget to add the includes right?
esphome:
  name: $device_name
  includes:
    - colorwheel.h

yes they are added also

# Example config.yaml
esphome:
  name: nspanel
  comment: $device_name
  includes:
    - colorwheel.h

ckegels · 2022-12-10T01:09:56Z

ok, well let me know what the logs say otherwise i cant do much

adrianGOO · 2022-12-10T01:12:38Z

ok, well let me know what the logs say otherwise I cant do much

I am stuck on timer because I never use any so esphome is not letting me load the file you gave me without adding timer script.

ckegels · 2022-12-10T01:13:39Z

then get rid of the line...

adrianGOO · 2022-12-10T01:14:40Z

then get rid of the line...

ok doing it now

adrianGOO · 2022-12-10T01:23:23Z

getting errors :(

adrianGOO · 2022-12-10T01:27:21Z

here is the log I am getting with my current codes

[02:26:17][D][homeassistant.text_sensor:017]: 'sensor.nspanel_dev_temperature': Got state '25.7'
[02:26:17][D][nextion:439]: Got touch page=9 component=17 type=PRESS
[02:26:17][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON
[02:26:17][D][nextion:439]: Got touch page=9 component=17 type=RELEASE
[02:26:17][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF
[02:26:17][D][nextion:439]: Got touch page=9 component=17 type=PRESS
[02:26:17][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON
[02:26:17][D][nextion:439]: Got touch page=9 component=17 type=RELEASE
[02:26:17][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF

ckegels · 2022-12-10T01:27:40Z

sooo just litarally copy pasting everything wont work, you have to try and read it and see what every line is doing.
this was for a second color wheel (not done yet so yea)

this code should be correct

#color wheel
  - platform: nextion
    name: $device_name Color Wheel
    page_id: 9
    component_id: 17
    internal: true
    on_release:
      then:
        - lambda: |-
            id(color_wheel_x).update();
            id(color_wheel_y).update();
        - delay: 20ms
        - lambda: |-
            RgbColor color = posToColor(id(color_wheel_x).state, id(color_wheel_y).state);
            id(selected_color_red) = String(color.r);
            id(selected_color_green) = String(color.g);
            id(selected_color_blue) = String(color.b);
        - logger.log:
            format: "RGB RED VALUE: %s"
            args: [ 'id(selected_color_red).c_str()']
        - logger.log:
            format: "RGB GREEN VALUE: %s"
            args: [ 'id(selected_color_green).c_str()']
        - logger.log:
            format: "RGB BLUE VALUE: %s"
            args: [ 'id(selected_color_blue).c_str()']
        - homeassistant.service:
            service: script.set_light_rgb
            data:
              light_name: $target_lights
              red: !lambda 'return id(selected_color_red).c_str();'
              green: !lambda 'return id(selected_color_green).c_str();'
              blue: !lambda 'return id(selected_color_blue).c_str();'

ckegels · 2022-12-10T01:28:44Z

here is the log I am getting with my current codes

[02:26:17][D][homeassistant.text_sensor:017]: 'sensor.nspanel_dev_temperature': Got state '25.7' [02:26:17][D][nextion:439]: Got touch page=9 component=17 type=PRESS [02:26:17][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON [02:26:17][D][nextion:439]: Got touch page=9 component=17 type=RELEASE [02:26:17][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF [02:26:17][D][nextion:439]: Got touch page=9 component=17 type=PRESS [02:26:17][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON [02:26:17][D][nextion:439]: Got touch page=9 component=17 type=RELEASE [02:26:17][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF

is this with the logging ?

adrianGOO · 2022-12-10T01:30:05Z

now I am loading the codes you just gave me.
The log I pasted few seconds ago is from my old config codes.

adrianGOO · 2022-12-10T01:32:29Z

[02:31:51][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON
[02:31:52][D][nextion:439]: Got touch page=9 component=17 type=RELEASE
[02:31:52][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF
[02:31:52][D][main:324]: RGB RED VALUE: 255
[02:31:52][D][main:327]: RGB GREEN VALUE: 255
[02:31:52][D][main:330]: RGB BLUE VALUE: 255
[02:31:52][D][nextion:439]: Got touch page=9 component=17 type=PRESS
[02:31:52][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON
[02:31:52][D][nextion:439]: Got touch page=9 component=17 type=RELEASE
[02:31:52][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF
[02:31:53][D][main:324]: RGB RED VALUE: 255
[02:31:53][D][main:327]: RGB GREEN VALUE: 255
[02:31:53][D][main:330]: RGB BLUE VALUE: 255
[02:31:53][D][nextion:439]: Got touch page=9 component=17 type=PRESS
[02:31:53][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON
[02:31:53][D][nextion:439]: Got touch page=9 component=17 type=RELEASE
[02:31:53][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF
[02:31:53][D][main:324]: RGB RED VALUE: 255
[02:31:53][D][main:327]: RGB GREEN VALUE: 255
[02:31:53][D][main:330]: RGB BLUE VALUE: 255
[02:31:54][D][nextion:439]: Got touch page=9 component=17 type=PRESS
[02:31:54][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON
[02:31:54][D][nextion:439]: Got touch page=9 component=17 type=RELEASE
[02:31:54][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF
[02:31:54][D][main:324]: RGB RED VALUE: 255
[02:31:54][D][main:327]: RGB GREEN VALUE: 255
[02:31:54][D][main:330]: RGB BLUE VALUE: 255
[02:31:54][D][nextion:439]: Got touch page=9 component=17 type=PRESS
[02:31:54][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON
[02:31:54][D][nextion:439]: Got touch page=9 component=17 type=RELEASE
[02:31:54][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF
[02:31:54][D][main:324]: RGB RED VALUE: 255
[02:31:54][D][main:327]: RGB GREEN VALUE: 255
[02:31:54][D][main:330]: RGB BLUE VALUE: 255

ckegels · 2022-12-10T01:40:40Z

[02:31:51][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON [02:31:52][D][nextion:439]: Got touch page=9 component=17 type=RELEASE [02:31:52][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF [02:31:52][D][main:324]: RGB RED VALUE: 255 [02:31:52][D][main:327]: RGB GREEN VALUE: 255 [02:31:52][D][main:330]: RGB BLUE VALUE: 255 [02:31:52][D][nextion:439]: Got touch page=9 component=17 type=PRESS [02:31:52][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON [02:31:52][D][nextion:439]: Got touch page=9 component=17 type=RELEASE [02:31:52][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF [02:31:53][D][main:324]: RGB RED VALUE: 255 [02:31:53][D][main:327]: RGB GREEN VALUE: 255 [02:31:53][D][main:330]: RGB BLUE VALUE: 255 [02:31:53][D][nextion:439]: Got touch page=9 component=17 type=PRESS [02:31:53][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON [02:31:53][D][nextion:439]: Got touch page=9 component=17 type=RELEASE [02:31:53][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF [02:31:53][D][main:324]: RGB RED VALUE: 255 [02:31:53][D][main:327]: RGB GREEN VALUE: 255 [02:31:53][D][main:330]: RGB BLUE VALUE: 255 [02:31:54][D][nextion:439]: Got touch page=9 component=17 type=PRESS [02:31:54][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON [02:31:54][D][nextion:439]: Got touch page=9 component=17 type=RELEASE [02:31:54][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF [02:31:54][D][main:324]: RGB RED VALUE: 255 [02:31:54][D][main:327]: RGB GREEN VALUE: 255 [02:31:54][D][main:330]: RGB BLUE VALUE: 255 [02:31:54][D][nextion:439]: Got touch page=9 component=17 type=PRESS [02:31:54][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON [02:31:54][D][nextion:439]: Got touch page=9 component=17 type=RELEASE [02:31:54][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF [02:31:54][D][main:324]: RGB RED VALUE: 255 [02:31:54][D][main:327]: RGB GREEN VALUE: 255 [02:31:54][D][main:330]: RGB BLUE VALUE: 255

mmm ok all 255 vallues meaning its not reading correctly

adrianGOO · 2022-12-10T01:41:36Z

Anyway thank you so much for your shared time but my colour wheel is still useless.

ckegels · 2022-12-10T01:42:37Z

it sucks because i had the same problem just cant remember what it was

ckegels · 2022-12-10T01:43:10Z

i know i had problems with the offset, but im not really sure

adrianGOO · 2022-12-10T01:43:37Z

Can this be the problem ?
U see there are all 255

ckegels · 2022-12-10T01:44:57Z

no the colorwheel.h doesnt have errors as far as i can see

ckegels · 2022-12-10T01:46:24Z

paste your entire code here (leave out any personal info like wifi and stuff)
format it correctly!

ckegels · 2022-12-10T01:54:39Z

i did actuelly make changes to the colorwheel.h ill try to redo it to make it compatible for you and you can try that

ckegels · 2022-12-10T01:56:22Z

`# NSPanel YAML by marcfager. Please check github for credits: https://github.com/marcfager/nspanel-mf

Version 2022-01-19

substitutions:

Name the device and it's entities

device_name: nspanel-dev wifi_ssid: !secret wifi_ssid wifi_pass: !secret wifi_password tft_url: !secret tft_upload_url target_lights: light.room_lamp_rgb

global varibles.

globals:

id: selected_color_red
type: String

id: selected_color_green
type: String

id: selected_color_blue
type: String

Example config.yaml

esphome: name: nspanel comment: $device_name includes: - colorwheel.h

esp32: board: esp32dev

Wifi settings. Add these to your secrets.yaml. fast_connect must be true for a hidden ssid.

wifi: ssid: $wifi_ssid password: $wifi_pass

API. Add api_pwd to your secrets.yaml.

api:

services: # Service to play a rtttl tone - service: play_rtttl variables: song_str: string then: - rtttl.play: rtttl: !lambda 'return song_str;' # Service to update the HMI file - service: upload_tft then: - lambda: 'id(disp1)->upload_tft();' # Service to control the visible page from Home Assistant - service: set_page variables: page: int then: - lambda: id(disp1).send_command_printf("page %i", page);
# Service to show a notification on the screen for 15 s. Tap or wait to close
- service: notification
  variables:
    header: string
    message: string
  then:
    - lambda: |-
        id(disp1).set_component_text_printf("Notifications.head", "%s", header.c_str());
        id(disp1).set_component_text_printf("Notifications.body", "%s", message.c_str());
        id(disp1).send_command_printf("page 6");
    - rtttl.play: "twobits:d=4,o=5,b=220:c6,8g,8g,a,g,p,b,c6"
    - delay: 30s
    - lambda: |-
        id(disp1).send_command_printf("page 0");
        id(disp1).set_component_text_printf("Notifications.head", " ");
        id(disp1).set_component_text_printf("Notifications.body", " ");
        id(disp1).send_command_printf("page 0");

# Service to send a command directly to the display. Useful for testing
- service: send_command
  variables:
    cmd: string
  then:
    - lambda: 'id(disp1).send_command_printf("%s", cmd.c_str());'

# Service to show a QR code on the display (ex. for WiFi password)
- service: display_qr
  variables:
    qrdata: string
  then:
    - lambda: |-
        id(disp1).set_component_text_printf("QR.qr0", "%s", qrdata.c_str());
        id(disp1).send_command_printf("page 7");
    - delay: 15s
    - lambda: |-
        id(disp1).send_command_printf("page 0");
        id(disp1).send_command_printf("QR.qr0.txt=");
        id(disp1).send_command_printf("page 0");

# Service to wake up screen
- service: wakeup_screen
  then:
    - lambda: |-
        id(disp1).send_command_printf("page 0");
Time component that fetches time from Home Assistant and updates the display once a minute and when the display is ready at bootup (and time is available).

time:

platform: homeassistant
id: homeassistant_time
on_time:

seconds: 0
minutes: /1
then:

lambda: |-
id(disp1).set_component_text_printf("Screensaver.time", "%02i:%02i", id(homeassistant_time).now().hour, id(homeassistant_time).now().minute);
id(disp1).set_component_text_printf("Screensaver.date", "%i-%02i-%02i", id(homeassistant_time).now().year, id(homeassistant_time).now().month, id(homeassistant_time).now().day_of_month);

on_time_sync:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
id(disp1).set_component_text_printf("Screensaver.time", "%02i:%02i", id(homeassistant_time).now().hour, id(homeassistant_time).now().minute);
id(disp1).set_component_text_printf("Screensaver.date", "%i-%02i-%02i", id(homeassistant_time).now().year, id(homeassistant_time).now().month, id(homeassistant_time).now().day_of_month);

Logger. Disable the temperature sensor etc. to focus on the HMI development

logger: baud_rate: 0 level: DEBUG logs: sensor: WARN resistance: WARN text_sensor: WARN ntc: WARN

OTA (Over the air updates) password. Add to your secrets.yaml

ota:

Uart for the Nextion display

uart: tx_pin: 16 rx_pin: 17 baud_rate: 115200 id: tf_uart

Functionality for the Nextion display

external_components:

source: github://pr#2956
components: [nextion]
refresh: 1h

A reboot button is always useful

button:

platform: restart
name: $device_name Restart

#==============================================================================# ############# BINARY SENSORS / Physical Buttons in NSPanel ##################### #==============================================================================#

Binary sensors

binary_sensor:

platform: gpio
name: $device_name Left Button
pin:
number: 14
inverted: true
on_click:

switch.toggle: relay_1

platform: gpio
name: $device_name Right Button
pin:
number: 27
inverted: true
on_click:

switch.toggle: relay_2

#==============================================================# ############# BINARY SENSORS / Music page ##################### #==============================================================#

Buttons on the Music page

platform: nextion
name: $device_name Music previous
page_id: 1
component_id: 1

platform: nextion
name: $device_name Music next
page_id: 1
component_id: 3

platform: nextion
name: $device_name Music cast
page_id: 1
component_id: 4

platform: nextion
name: $device_name Music volup
page_id: 1
component_id: 8

platform: nextion
name: $device_name Playlist cocktail
page_id: 1
component_id: 9

platform: nextion
name: $device_name Playlist food
page_id: 1
component_id: 10

platform: nextion
name: $device_name Playlist dance
page_id: 1
component_id: 11

platform: nextion
name: $device_name Playlist note
page_id: 1
component_id: 12

#================================================================# ############# BINARY SENSORS / Light buttons ##################### #================================================================#

LIGHTS BUTTONS

platform: nextion
name: $device_name Light 1 button
page_id: 2
component_id: 14
on_click:

homeassistant.service:
service: light.toggle
data:
entity_id: light.k1_l2

platform: nextion
name: $device_name Light 2 button
page_id: 2
component_id: 5
on_click:

homeassistant.service:
service: light.toggle
data:
entity_id: light.room_lamp_rgb

platform: nextion
name: $device_name Light 3 button
page_id: 2
component_id: 6
on_click:

homeassistant.service:
service: light.toggle
data:
entity_id: light.spot_kitchen

platform: nextion
name: $device_name Light 4 button
page_id: 2
component_id: 17
on_click:

homeassistant.service:
service: light.toggle
data:
entity_id: light.test3

platform: nextion
name: $device_name Light 5 button
page_id: 2
component_id: 18
on_click:

homeassistant.service:
service: light.toggle
data:
entity_id: light.test2

platform: nextion
name: $device_name Light 6 button
page_id: 2
component_id: 19
on_click:

homeassistant.service:
service: light.toggle
data:
entity_id: light.test1

RGB CONTROLER

platform: nextion
name: $device_name Brightness Slider
page_id: 9
component_id: 2
internal: true
on_release:
then:

lambda: !lambda |-
id(brightness_value).update();

#color wheel

platform: nextion
name: $device_name Color Wheel
page_id: 9
component_id: 17
internal: true
on_release:
then:

lambda: |-
id(color_wheel_x).update();
id(color_wheel_y).update();

delay: 20ms

lambda: |-
RgbColor color = posToColor(id(color_wheel_x).state, id(color_wheel_y).state);
id(selected_color_red) = String(color.r);
id(selected_color_green) = String(color.g);
id(selected_color_blue) = String(color.b);

logger.log:
format: "RGB RED VALUE: %s"
args: [ 'id(selected_color_red).c_str()']

logger.log:
format: "RGB GREEN VALUE: %s"
args: [ 'id(selected_color_green).c_str()']

logger.log:
format: "RGB BLUE VALUE: %s"
args: [ 'id(selected_color_blue).c_str()']

homeassistant.service:
service: script.set_light_rgb
data:
light_name: $target_lights
red: !lambda 'return id(selected_color_red).c_str();'
green: !lambda 'return id(selected_color_green).c_str();'
blue: !lambda 'return id(selected_color_blue).c_str();'

platform: nextion
name: $device_name Color Temp Slider
page_id: 9
component_id: 12
internal: true
on_release:
then:

lambda: !lambda |-
id(color_temp_value).update();

#======================================================# ################## COVER BUTTONS ##################### #======================================================#

COVER BUTTONS

platform: nextion
name: $device_name Light 10 button
page_id: 4
component_id: 13
on_click:

homeassistant.service:
service: cover.open_cover
data:
entity_id: cover.sonoff_10016e3584

platform: nextion
name: $device_name Light 11 button
page_id: 4
component_id: 14
on_click:

homeassistant.service:
service: cover.stop_cover
data:
entity_id: cover.sonoff_10016e3584

platform: nextion
name: $device_name Light 12 button
page_id: 4
component_id: 15
on_click:

homeassistant.service:
service: cover.close_cover
data:
entity_id: cover.sonoff_10016e3584

platform: nextion
name: $device_name Light 13 button
page_id: 4
component_id: 12
on_click:

homeassistant.service:
service: cover.open_cover
data:
entity_id: cover.sonoff_10015f8ad9

platform: nextion
name: $device_name Light 14 button
page_id: 4
component_id: 16
on_click:

homeassistant.service:
service: cover.stop_cover
data:
entity_id: cover.sonoff_10015f8ad9

platform: nextion
name: $device_name Light 15 button
page_id: 4
component_id: 17
on_click:

homeassistant.service:
service: cover.close_cover
data:
entity_id: cover.sonoff_10015f8ad9

platform: nextion
name: $device_name Light 16 button
page_id: 4
component_id: 21
on_click:

homeassistant.service:
service: cover.open_cover
data:
entity_id: cover.lr_roller_shutter_group

platform: nextion
name: $device_name Light 17 button
page_id: 4
component_id: 22
on_click:

homeassistant.service:
service: cover.stop_cover
data:
entity_id: cover.lr_roller_shutter_group

platform: nextion
name: $device_name Light 17 button
page_id: 4
component_id: 23
on_click:

homeassistant.service:
service: cover.close_cover
data:
entity_id: cover.lr_roller_shutter_group

SCENES BUTTONS

platform: nextion
name: $device_name Scenes 4-th button
page_id: 3
component_id: 8
on_click:

homeassistant.service:
service: light.toggle
data:
entity_id: light.test6

platform: nextion
name: $device_name Scenes 5-th button
page_id: 3
component_id: 9
on_click:

homeassistant.service:
service: light.toggle
data:
entity_id: light.test7

platform: nextion
name: $device_name Scenes 6-th button
page_id: 3
component_id: 10
on_click:

homeassistant.service:
service: light.toggle
data:
entity_id: light.test8

platform: nextion
name: $device_name Light 4 button
page_id: 10
component_id: 5
on_click:

homeassistant.service:
service: light.toggle
data:
entity_id: light.test9

MUSIC BUTTONS

platform: nextion
name: $device_name Music 12-th button
page_id: 1
component_id: 12
on_click:

homeassistant.service:
service: script.play_pause
data:
entity_id: media_player.volumio

platform: nextion
name: $device_name Music 1-th button
page_id: 1
component_id: 1
on_click:

homeassistant.service:
service: script.next_music_track
data:
entity_id: media_player.volumio

platform: nextion
name: $device_name Music 2-th button
page_id: 1
component_id: 2
on_click:

homeassistant.service:
service: script.next_music_track_2
data:
entity_id: media_player.volumio

platform: nextion
name: $device_name Music 7-th button
page_id: 1
component_id: 7
on_click:

homeassistant.service:
service: media_player.volume_up
data:
entity_id: media_player.volumio

platform: nextion
name: $device_name Music 6-th button
page_id: 1
component_id: 6
on_click:

homeassistant.service:
service: media_player.volume_down
data:
entity_id: media_player.volumio

FAVORITE RADIOS

platform: nextion
name: $device_name Fvorites 7-th button
page_id: 8
component_id: 7
on_click:

homeassistant.service:
service: script.1654893908316
data:
entity_id: media_player.volumio

platform: nextion
name: $device_name Fvorites 6-th button
page_id: 8
component_id: 6
on_click:

homeassistant.service:
service: script.90s90s_hits
data:
entity_id: media_player.volumio

platform: nextion
name: $device_name Fvorites 7-th button
page_id: 8
component_id: 7
on_click:

homeassistant.service:
service: script.90s90s_love
data:
entity_id: media_player.volumio

platform: nextion
name: $device_name Fvorites 8-th button
page_id: 8
component_id: 8
on_click:

homeassistant.service:
service: script.bigfm_berlin
data:
entity_id: media_player.volumio

platform: nextion
name: $device_name Fvorites 9-th button
page_id: 8
component_id: 9
on_click:

homeassistant.service:
service: script.1fm_absolute_top_40
data:
entity_id: media_player.volumio

platform: nextion
name: $device_name Favorites 10-th button
page_id: 8
component_id: 10
on_click:

homeassistant.service:
service: script.radio_tt
data:
entity_id: media_player.volumio

platform: nextion
name: $device_name Favorites 5-th button
page_id: 8
component_id: 5
on_click:

homeassistant.service:
service: script.1654893908316
data:
entity_id: media_player.volumio

platform: nextion
name: $device_name Favorites 11-th button
page_id: 8
component_id: 11
on_click:

homeassistant.service:
service: script.top_ho_radio
data:
entity_id: media_player.volumio

platform: nextion
name: $device_name Favorites 12-th button
page_id: 8
component_id: 12
on_click:

homeassistant.service:
service: script.love_radio
data:
entity_id: media_player.volumio

Air Condition buttons

platform: nextion
name: $device_name Clima 22-th button
page_id: 7
component_id: 22
on_click:

homeassistant.service:
service: script.living_room_air_conditioner_toggle_power
data:
entity_id: climate.142936511684866_climate

platform: nextion
name: $device_name Clima 23-th button
page_id: 7
component_id: 23
on_click:

homeassistant.service:
service: script.hvac_auto
data:
entity_id: climate.142936511684866_climate

platform: nextion
name: $device_name Clima 24-th button
page_id: 7
component_id: 24
on_click:

homeassistant.service:
service: script.hvac_heat
data:
entity_id: climate.142936511684866_climate

platform: nextion
name: $device_name Clima 25-th button
page_id: 7
component_id: 25
on_click:

homeassistant.service:
service: script.hvac_cool
data:
entity_id: climate.142936511684866_climate

platform: nextion
name: $device_name Clima 26-th button
page_id: 7
component_id: 26
on_click:

homeassistant.service:
service: script.1670175694586
data:
entity_id: climate.142936511684866_climate

platform: nextion
name: $device_name Clima 27-th button
page_id: 7
component_id: 27
on_click:

homeassistant.service:
service: script.hvac_dry
data:
entity_id: climate.142936511684866_climate

#========================# ####### FAN MODE ######## #========================#

platform: nextion
name: $device_name FAN SILENT
page_id: 7
component_id: 7
on_click:

homeassistant.service:
service: script.silent_fan_living_room_ac
data:
entity_id: climate.142936511684866_climate

platform: nextion
name: $device_name FAN LOW
page_id: 7
component_id: 8
on_click:

homeassistant.service:
service: script.low_fan_living_room_ac
data:
entity_id: climate.142936511684866_climate

platform: nextion
name: $device_name FAN MEDIUM
page_id: 7
component_id: 9
on_click:

homeassistant.service:
service: script.medium_fan_living_room_ac
data:
entity_id: climate.142936511684866_climate

platform: nextion
name: $device_name FAN HIGH
page_id: 7
component_id: 10
on_click:

homeassistant.service:
service: script.high_fan_living_room_ac
data:
entity_id: climate.142936511684866_climate

platform: nextion
name: $device_name FAN AUTO
page_id: 7
component_id: 11
on_click:

homeassistant.service:
service: script.auto_fan_living_room_ac
data:
entity_id: climate.142936511684866_climate

########################

Thermostat UP & Down

########################

platform: nextion
name: "$friendly_name Thermostat - Airco setpoint min"
page_id: 7
component_id: 3

platform: nextion
name: "$friendly_name Thermostat - Airco setpoint plus"
page_id: 7
component_id: 4
###########################

output:

Buzzer for playing tones

platform: ledc
id: buzzer_out
pin:
number: 21

switch:

Physical relay 1

platform: gpio
name: $device_name Relay 1
id: relay_1
pin:
number: 22

Physical relay 2

platform: gpio
name: $device_name Relay 2
id: relay_2
pin:
number: 19

Turn screen power on/off. Easy way to configure the screen power control, but this should not be used from HA, as all components must be re-initialized afterwards. For lights, names of lights etc. this practically means that the state must change once to happen.

platform: gpio
name: $device_name Screen Power
id: screen_power
entity_category: config
pin:
number: 4
inverted: true
restore_mode: ALWAYS_ON

Basically a global variable to keep track on whether the Nextion display is ready or not. Delays initial info from HA to the display.

platform: template
name: $device_name Nextion inited
id: nextion_init
entity_category: config
restore_state: false
assumed_state: off
optimistic: true

Show alarm screen on the display and disable it (except for physical buttons).

platform: template
name: $device_name Alarm screen
id: alarm_activated
restore_state: false
assumed_state: off
optimistic: true
on_turn_on:

lambda: id(disp1).send_command_printf("page 5");
on_turn_off:

lambda: id(disp1).send_command_printf("page 0");

Disable Dim-down-function on screen

platform: template
name: $device_name Disable dim-down
id: disp1_disdim
restore_state: true
assumed_state: off
optimistic: true
on_turn_on:

lambda: id(disp1).send_command_printf("Home.disdim.val=1");
on_turn_off:

lambda: id(disp1).send_command_printf("Home.disdim.val=0");

Disable Screensaver-function on screen

platform: template
name: $device_name Disable screensaver
id: disp1_dissleep
restore_state: true
assumed_state: off
optimistic: true
on_turn_on:

lambda: id(disp1).send_command_printf("Home.dissleep.val=1");
on_turn_off:

lambda: id(disp1).send_command_printf("Home.dissleep.val=0");

Disable Go to Home page-function on screen

platform: template
name: $device_name Disable go to home
id: disp1_disgth
restore_state: true
assumed_state: off
optimistic: true
on_turn_on:

lambda: id(disp1).send_command_printf("Home.disgth.val=1");
on_turn_off:

lambda: id(disp1).send_command_printf("Home.disgth.val=0");

Rtttl function for buzzer

rtttl: id: buzzer output: buzzer_out

########################################################################## #============================ SENSORS ===================================# ##########################################################################

sensor:

Internal temperature sensor, adc value

platform: adc
id: ntc_source
pin: 38
update_interval: 10s
attenuation: 11db

Internal temperature sensor, adc reading converted to resistance (calculation)

platform: resistance
id: resistance_sensor
sensor: ntc_source
configuration: DOWNSTREAM
resistor: 11.2kOhm

Internal temperature sensor, resistance to temperature (calculation)

platform: ntc
id: temperature
sensor: resistance_sensor
calibration:
b_constant: 3950
reference_temperature: 25°C
reference_resistance: 10kOhm
name: $device_name Temperature

Uptime for the display. Also updates a human readable one (further down)

platform: uptime
name: $device_name Uptime Sensor
id: uptime_sensor
update_interval: 60s
on_raw_value:
then:

text_sensor.template.publish:
id: uptime_human
state: !lambda |-
int seconds = round(id(uptime_sensor).raw_state);
int days = seconds / (24 * 3600);
seconds = seconds % (24 * 3600);
int hours = seconds / 3600;
seconds = seconds % 3600;
int minutes = seconds / 60;
seconds = seconds % 60;
return (
(days ? to_string(days) + "d " : "") +
(hours ? to_string(hours) + "h " : "") +
(minutes ? to_string(minutes) + "m " : "") +
(to_string(seconds) + "s")
).c_str();

WiFi signals strength sensor

platform: wifi_signal
name: $device_name WiFi Signal Sensor
update_interval: 60s

Current page displayed on the HMi

platform: nextion
name: $device_name Current display page
id: disp1_current_page
variable_name: dp
update_interval: 1s

Temperature outside, fetched from HA

platform: homeassistant
id: current_temperature
entity_id: weather.home
attribute: temperature
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: id(disp1).set_component_text_printf("Screensaver.temp", "%.1f", id(current_temperature).state);

Temperature outside feels like, fetched from HA

platform: homeassistant
id: temp_feelslike
entity_id: sensor.142936511684866_outdoor_temperature
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: id(disp1).set_component_text_printf("Screensaver.tempfl", "%.1f", id(temp_feelslike).state);

Air Conditioner temperature, fetched from HA

platform: homeassistant
id: target_temperature
entity_id: climate.142936511684866_climate
attribute: temperature
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: id(disp1).set_component_text_printf("Clima.lractemp", "%.1f", id(target_temperature).state);

Grab current Airco livingroom setpoint from Home Assistant

platform: homeassistant
id: airco_livingroom_setpoint
entity_id: climate.142936511684866_climate
attribute: temperature
internal: true
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: 'id(disp1).set_component_text_printf("Clima.setp_airco_liv", "%.1f", id(airco_livingroom_setpoint).state);'

######################################## ########## RGB SENSOR ################## ########################################

platform: homeassistant
id: current_brightness
entity_id: $target_lights
attribute: brightness
on_value:
then:

lambda: 'id(disp1).send_command_printf("brightnessVal.val=%i", (int)x);'

platform: homeassistant
id: current_color_temp
entity_id: $target_lights
attribute: color_temp
on_value:
then:

lambda: 'id(disp1).send_command_printf("tempSlider.val=%i", (int)x);'

platform: nextion
id: brightness_value
component_name: brightnessVal
on_value:
then:

homeassistant.service:
service: light.turn_on
data:
entity_id: $target_lights
brightness: !lambda 'return (int)x;'

platform: nextion
id: color_temp_value
component_name: tempSlider
on_value:
then:

homeassistant.service:
service: light.turn_on
data:
entity_id: $target_lights
color_temp: !lambda 'return (int)x;'

platform: nextion
id: color_wheel_x
component_name: selectedColorX
filters:

offset: 27

platform: nextion
id: color_wheel_y
component_name: selectedColorY
filters:

offset: 91

#################################################################################################### #==================================== TEXT SENSOR =================================================# #################################################################################################### text_sensor:

IP address of device. Not really needed for HA (as HA already knows it), but for showing on the display during startup. The startup screen will leave on if no instance connects to the API.

platform: wifi_info
ip_address:
name: $device_name IP address
id: ip_address
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: id(disp1).set_component_text_printf("Connecting.ip_addr", "%s", id(ip_address).state.c_str());

Uptime in a human readable form. Updated from the uptime sensor

platform: template
name: $device_name Uptime Human Readable
id: uptime_human
icon: mdi:clock-start

ESPHome version used to compile the app

platform: version
name: $device_name ESPHome Version

Media player entity (or any text entity) to pull currently playing song name from

platform: homeassistant
id: music_artist
entity_id: media_player.volumio
attribute: media_artist
on_value:
then:

lambda: id(disp1).set_component_text_printf("Music.music_sn", "%s", id(music_artist).state.c_str());

Media player entity (or any text entity) to pull currently playing artist name from

platform: homeassistant
id: music_title
entity_id: media_player.volumio
attribute: media_title
on_value:
then:

lambda: id(disp1).set_component_text_printf("Music.music_an", "%s", id(music_title).state.c_str());

Sun sensor from HA. Used to decide whether a sun or moon weather symbol should be used.

platform: homeassistant
id: sun_sun
entity_id: sun.sun

Weather symbol, HA weather entity to pull data from

platform: homeassistant
id: weather_symbol
entity_id: weather.home
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol=5; // 5 is a empty box.
if (id(weather_symbol).state == "clear-night") {
symbol=6;
} else if (id(weather_symbol).state == "cloudy") {
symbol=7;
if (id(sun_sun).state == "below_horizon") {
symbol=8;
}
} else if (id(weather_symbol).state == "fog") {
symbol=9;
} else if (id(weather_symbol).state == "hail" || id(weather_symbol).state == "snowy-rainy") {
symbol=10;
} else if (id(weather_symbol).state == "lightning") {
symbol=11;
} else if (id(weather_symbol).state == "lightning-rainy" || id(weather_symbol).state == "exceptional") {
symbol=12;
if (id(sun_sun).state == "below_horizon") {
symbol=13;
}
} else if (id(weather_symbol).state == "partlycloudy") {
symbol=14;
if (id(sun_sun).state == "below_horizon") {
symbol=8;
}
} else if (id(weather_symbol).state == "pouring") {
symbol=15;
} else if (id(weather_symbol).state == "rainy") {
symbol=16;
} else if (id(weather_symbol).state == "snowy") {
symbol=17;
} else if (id(weather_symbol).state == "sunny") {
symbol=18;
if (id(sun_sun).state == "below_horizon") {
symbol = 6;
}
} else if (id(weather_symbol).state == "windy" || id(weather_symbol).state == "windy-variant") {
symbol=19;
}
id(disp1).send_command_printf("Screensaver.weather_symbol.pic=%i", symbol);

Grab current Airco livingroom fan speed from Home Assistant, to show on the display

platform: homeassistant
id: airco_livingroom_fan_speed
entity_id: climate.142936511684866_climate
attribute: speed
internal: true
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: id(disp1).set_component_text_printf("Clima.airliv_fan_sp", "%s", id(airco_livingroom_fan_speed).state.c_str());

#############################

LIGHT ICON AND NAME

#############################

Light setup, 1-st light. If you want to leave a light out, just comment out the section for the light and name.

platform: homeassistant
id: koridori_2
entity_id: light.koridori_k1_l2
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol = 32;
if (id(koridori_2).state == "off") {
symbol=31;
}
id(disp1).send_command_printf("Lights.light1.pic=%i", symbol);

Light setup, 1-st light's name

platform: homeassistant
id: koridori_2_name
entity_id: light.koridori_k1_l2
attribute: friendly_name
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: id(disp1).set_component_text_printf("Lights.light1t", "%s", id(koridori_2_name).state.c_str());

Light setup, 2-nd light. If you want to leave a light out, just comment out the section for the light and name.

platform: homeassistant
id: stop
entity_id: light.room_lamp_rgb
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol = 49;
if (id(stop).state == "off") {
symbol=48;
}
id(disp1).send_command_printf("Lights.light2.pic=%i", symbol);

Light setup, 2-nd light's name

platform: homeassistant
id: stop_name
entity_id: light.room_lamp_rgb
attribute: friendly_name
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: id(disp1).set_component_text_printf("Lights.light2t", "%s", id(stop_name).state.c_str());

Light setup, 3-rd light. If you want to leave a light out, just comment out the section for the light and name.

platform: homeassistant
id: stop1
entity_id: light.spot_dritat_e_kuzhines
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol = 33;
if (id(stop1).state == "off") {
symbol=34;
}
id(disp1).send_command_printf("Lights.light3.pic=%i", symbol);

Light setup, 3-rd light's name

platform: homeassistant
id: stop1_name
entity_id: light.spot_dritat_e_kuzhines
attribute: friendly_name
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: id(disp1).set_component_text_printf("Lights.light3t", "%s", id(stop1_name).state.c_str());

Light setup, 4-th light. If you want to leave a light out, just comment out the section for the light and name.

platform: homeassistant
id: tvpentik
entity_id: light.room_lamp_rgb
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol = 29;
if (id(tvpentik).state == "off") {
symbol=28;
}
id(disp1).send_command_printf("Lights.light4.pic=%i", symbol);

Light setup, 5-fth light. If you want to leave a light out, just comment out the section for the light and name.

platform: homeassistant
id: kontorsfonster
entity_id: light.koridori_k1_l2
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol = 29;
if (id(kontorsfonster).state == "off") {
symbol=28;
}
id(disp1).send_command_printf("Lights.light5.pic=%i", symbol);

Light setup, 5-fth light's name

platform: homeassistant
id: kontorsfonster_name
entity_id: light.koridori_k1_l2
attribute: friendly_name
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: id(disp1).set_component_text_printf("Lights.light5t", "%s", id(kontorsfonster_name).state.c_str());

Light setup, 6-th light. If you want to leave a light out, just comment out the section for the light and name.

platform: homeassistant
id: kontorspentik
entity_id: light.koridori_k1_l2
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol = 29;
if (id(kontorspentik).state == "off") {
symbol=28;
}
id(disp1).send_command_printf("Lights.light6.pic=%i", symbol);

Light setup, 6-th light's name

platform: homeassistant
id: kontorspentik_name
entity_id: light.koridori_k1_l2
attribute: friendly_name
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: id(disp1).set_component_text_printf("Lights.light6t", "%s", id(kontorspentik_name).state.c_str());

################################## ########## COVERS PAGE ########### ##################################

Light setup, 10-th light. If you want to leave a light out, just comment out the section for the light and name.

platform: homeassistant
id: coverup
entity_id: cover.sonoff_10016e3584
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol = 23;
if (id(coverup).state == "off") {
symbol=22;
}
id(disp1).send_command_printf("Covers.light10.pic=%i", symbol);

Light setup, 11-th light. If you want to leave a light out, just comment out the section for the light and name.

platform: homeassistant
id: coverstop
entity_id: cover.sonoff_10016e3584
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol = 27;
if (id(coverstop).state == "off") {
symbol=26;
}
id(disp1).send_command_printf("Covers.light11.pic=%i", symbol);

Light setup, 12-th light. If you want to leave a light out, just comment out the section for the light and name.

platform: homeassistant
id: coverdown
entity_id: cover.sonoff_10016e3584
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol = 25;
if (id(coverdown).state == "off") {
symbol=24;
}
id(disp1).send_command_printf("Covers.light12.pic=%i", symbol);

Light setup, 13-th light. If you want to leave a light out, just comment out the section for the light and name.

platform: homeassistant
id: coverupR
entity_id: cover.sonoff_10015f8ad9
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol = 23;
if (id(coverup).state == "off") {
symbol=22;
}
id(disp1).send_command_printf("Covers.light13.pic=%i", symbol);

Light setup, 14-th light. If you want to leave a light out, just comment out the section for the light and name.

platform: homeassistant
id: coverstopR
entity_id: cover.sonoff_10015f8ad9
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol = 27;
if (id(coverstop).state == "off") {
symbol=26;
}
id(disp1).send_command_printf("Covers.light14.pic=%i", symbol);

Light setup, 15-th light. If you want to leave a light out, just comment out the section for the light and name.

platform: homeassistant
id: coverdownR
entity_id: cover.sonoff_10015f8ad9
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol = 25;
if (id(coverdown).state == "off") {
symbol=24;
}
id(disp1).send_command_printf("Covers.light15.pic=%i", symbol);

Light setup, 16-th light. If you want to leave a light out, just comment out the section for the light and name.

platform: homeassistant
id: coverupgroup
entity_id: cover.olti_s_roller_shutter_group
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol = 23;
if (id(coverup).state == "off") {
symbol=22;
}
id(disp1).send_command_printf("Covers.light16.pic=%i", symbol);

Light setup, 17-th light. If you want to leave a light out, just comment out the section for the light and name.

platform: homeassistant
id: coverstopgroup
entity_id: cover.olti_s_roller_shutter_group
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol = 27;
if (id(coverstop).state == "off") {
symbol=26;
}
id(disp1).send_command_printf("Covers.light17.pic=%i", symbol);

Light setup, 18-th light. If you want to leave a light out, just comment out the section for the light and name.

platform: homeassistant
id: coversdowngroup
entity_id: cover.olti_s_roller_shutter_group
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol = 25;
if (id(coverdown).state == "off") {
symbol=24;
}
id(disp1).send_command_printf("Covers.light18.pic=%i", symbol);

######################################## ################ SCENES ################ ########################################

Scene setup, 4-th button.

platform: homeassistant
id: sceneclosed
entity_id: light.koridori_k1_l2
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol = 55;
if (id(sceneclosed).state == "off") {
symbol=55;
}
id(disp1).send_command_printf("Scenes.scene4.pic=%i", symbol);

Scene setup, 5-th button.

platform: homeassistant
id: scenehalf
entity_id: light.koridori_k1_l2
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol = 53;
if (id(scenehalf).state == "off") {
symbol=53;
}
id(disp1).send_command_printf("Scenes.scene5.pic=%i", symbol);

Scene setup, 6-th button.

platform: homeassistant
id: sceneopen
entity_id: light.koridori_k1_l2
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol = 54;
if (id(sceneopen).state == "off") {
symbol=54;
}
id(disp1).send_command_printf("Scenes.scene6.pic=%i", symbol);

########################## ######### CLIMA ########## ##########################

Clima Power button.

platform: homeassistant
id: poweronoff
entity_id: climate.142936511684866_climate
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol = 68;
if (id(poweronoff).state == "off") {
symbol=67;
}
id(disp1).send_command_printf("Clima.poweronoff.pic=%i", symbol);

Clima Auto mode button.

platform: homeassistant
id: automode
entity_id: climate.set_hvac_mode
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol = 59;
if (id(automode).state == "off") {
symbol=60;
}
id(disp1).send_command_printf("Clima.automode.pic=%i", symbol);

Clima heat button.

platform: homeassistant
id: heat
entity_id: climate.set_hvac_mode
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol = 57;
if (id(heat).state == "off") {
symbol=58;
}
id(disp1).send_command_printf("Clima.heat.pic=%i", symbol);

Clima Cool button.

platform: homeassistant
id: cool
entity_id: climate.set_hvac_mode
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol = 62;
if (id(cool).state == "off") {
symbol=61;
}
id(disp1).send_command_printf("Clima.cool.pic=%i", symbol);

Clima Fan button.

platform: homeassistant
id: fan
entity_id: climate.set_hvac_mode
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol = 64;
if (id(fan).state == "off") {
symbol=63;
}
id(disp1).send_command_printf("Clima.fan.pic=%i", symbol);

Clima Dry button.

platform: homeassistant
id: dry
entity_id: climate.set_hvac_mode
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda: |-
int symbol = 66;
if (id(dry).state == "off") {
symbol=65;
}
id(disp1).send_command_printf("Clima.dry.pic=%i", symbol);

Screensaver, text line 2 (lower right part of screen)

platform: homeassistant
id: screensaver_text2
entity_id: sensor.nspanel_dev_temperature
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda:
id(disp1).set_component_text_printf("Screensaver.text2", "%s", id(screensaver_text2).state.c_str());

Clima page, text line 1 (lower right part of screen)

platform: homeassistant
id: clima_text1
entity_id: climate.142936511684866_climate
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda:
id(disp1).set_component_text_printf("Clima.text1", "%s", id(clima_text1).state.c_str());

Clima page, text line 2 (lower right part of screen)

platform: homeassistant
id: clima_text2
entity_id: sensor.nspanel_dev_temperature
on_value:
then:

wait_until:
switch.is_on: nextion_init

lambda:
id(disp1).set_component_text_printf("Clima.text2", "%s", id(clima_text2).state.c_str());

number:

Screen brightness

platform: template
name: $device_name Brightness
id: brightness
entity_category: config
unit_of_measurement: '%'
min_value: 0
max_value: 100
step: 1
initial_value: 30
set_action:
then:

lambda: 'id(disp1).set_backlight_brightness(x/100);'

lambda: 'id(disp1).send_command_printf("Home.brightness.val=%i", int(x));'

Screen brightness dimmed down

platform: template
name: $device_name Brightness dimdown
id: brightness_dim
entity_category: config
unit_of_measurement: '%'
min_value: 20
max_value: 100
step: 1
initial_value: 1
set_action:
then:

lambda: 'id(disp1).send_command_printf("Home.brightdd.val=%i", int(x));'

Configure the screen itself

display:

platform: nextion
id: disp1
uart_id: tf_uart
tft_url: http://192.168.1.176:8123/local/hmi.tft
A little fun...
on_setup:
then:
Enable 1 light page (up to 4 available)

lambda: id(disp1).send_command_printf("Lights.pages.val=1");

number.set:
id: brightness
value: 30

lambda: id(disp1).send_command_printf("page 4");

wait_until:
api.connected

switch.template.publish:
id: nextion_init
state: on

if:
condition:

switch.is_on: alarm_activated
then:

lambda: id(disp1).send_command_printf("page 6");
else:

delay: 5s

lambda: id(disp1).send_command_printf("page 0");

`

this format is unreadible please use the "add code option" (select code than press it)

ckegels · 2022-12-10T02:00:55Z

this is the colorwheel.h that i use it has a small change in it im just not sure that it is the issue but i guess its worth a shot (if this doesnt work just delete it)

include <cmath>

typedef struct {
    int r;
    int g;
    int b;
} RgbColor;

typedef struct {
    double hue;
    double saturation;
    double value;
} HsvColor;

double rad2deg(float rad) {
    return fmod((360 + 180 * rad / 3.14159265359), 360.0);
}

RgbColor hsv2rgb(HsvColor color) {
    double hue = color.hue / 60;
    float chroma = (color.value * color.saturation);
    float x = chroma * (1 - std::abs(fmod(hue, 2.0) - 1));
    float valueChroma = color.value * 255;
    float valueX = (x + color.value - chroma) * 255;
    float valueZero = (color.value - chroma) * 255;
    RgbColor rgb;
    if (hue <= 1) {
        rgb.r = round(valueChroma);
        rgb.g = round(valueX);
        rgb.b = round(valueZero);
    } else if (hue <= 2) {
        rgb.r = round(valueX);
        rgb.g = round(valueChroma);
        rgb.b = round(valueZero);
    } else if (hue <= 3) {
        rgb.r = round(valueZero);
        rgb.g = round(valueChroma);
        rgb.b = round(valueX);
    } else if (hue <= 4) {
        rgb.r = round(valueZero);
        rgb.g = round(valueX);
        rgb.b = round(valueChroma);
    } else if (hue <= 5) {
        rgb.r = round(valueX);
        rgb.g = round(valueZero);
        rgb.b = round(valueChroma);
    } else {
        rgb.r = round(valueChroma);
        rgb.g = round(valueZero);
        rgb.b = round(valueX);
    }
    return rgb;
}

RgbColor rectToRGB(float x, float y) {
    double r = sqrt(x*x + y*y);
    float sat = 0;
    if (r > 1) {
        sat = 255;
    } else {
        sat = r;
    }
    HsvColor hsv = {rad2deg(atan2(y, x)), sat, 1};
    RgbColor rgb = hsv2rgb(hsv);
    return rgb;
}

RgbColor posToColor(float x, float y) {
    float r = 213.0f / 2.0f;
    float posX = round((x - r) / r * 100) / 100;
    float posY = round((r - y) / r * 100) / 100;

    RgbColor rgb = rectToRGB(posX, posY);
    return rgb;
}

adrianGOO · 2022-12-10T02:08:27Z

Here is the log using new colorwheel

[03:06:10][D][main:324]: RGB RED VALUE: 86
[03:06:10][D][main:327]: RGB GREEN VALUE: 255
[03:06:10][D][main:330]: RGB BLUE VALUE: 240
[03:06:11][E][nextion:527]: ERROR: Received numeric return but next in queue "set_component_text" is not a valid sensor type 0
[03:06:12][E][nextion:527]: ERROR: Received numeric return but next in queue "set_component_text" is not a valid sensor type 0
[03:06:12][D][nextion:439]: Got touch page=9 component=17 type=PRESS
[03:06:12][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON
[03:06:12][D][nextion:439]: Got touch page=9 component=17 type=RELEASE
[03:06:12][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF
[03:06:12][D][main:324]: RGB RED VALUE: 86
[03:06:12][D][main:327]: RGB GREEN VALUE: 255
[03:06:12][D][main:330]: RGB BLUE VALUE: 240
[03:06:14][D][nextion:439]: Got touch page=9 component=17 type=PRESS
[03:06:14][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON
[03:06:14][D][nextion:439]: Got touch page=9 component=17 type=RELEASE
[03:06:14][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF
[03:06:14][D][main:324]: RGB RED VALUE: 255
[03:06:14][D][main:327]: RGB GREEN VALUE: 255
[03:06:14][D][main:330]: RGB BLUE VALUE: 255`
[03:06:10][D][main:324]: RGB RED VALUE: 86
[03:06:10][D][main:327]: RGB GREEN VALUE: 255
[03:06:10][D][main:330]: RGB BLUE VALUE: 240
[03:06:11][E][nextion:527]: ERROR: Received numeric return but next in queue "set_component_text" is not a valid sensor type 0
[03:06:12][E][nextion:527]: ERROR: Received numeric return but next in queue "set_component_text" is not a valid sensor type 0
[03:06:12][D][nextion:439]: Got touch page=9 component=17 type=PRESS
[03:06:12][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON
[03:06:12][D][nextion:439]: Got touch page=9 component=17 type=RELEASE
[03:06:12][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF
[03:06:12][D][main:324]: RGB RED VALUE: 86
[03:06:12][D][main:327]: RGB GREEN VALUE: 255
[03:06:12][D][main:330]: RGB BLUE VALUE: 240
[03:06:14][D][nextion:439]: Got touch page=9 component=17 type=PRESS
[03:06:14][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON
[03:06:14][D][nextion:439]: Got touch page=9 component=17 type=RELEASE
[03:06:14][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF
[03:06:14][D][main:324]: RGB RED VALUE: 255
[03:06:14][D][main:327]: RGB GREEN VALUE: 255
[03:06:14][D][main:330]: RGB BLUE VALUE: 255

ckegels · 2022-12-10T02:08:36Z

also fix the offsets to be negative

ckegels · 2022-12-10T02:09:49Z

oh ok so now we are getting some vallues why is green 255 tho

ckegels · 2022-12-10T02:12:46Z

Here is the log using new colorwheel [03:06:10][D][main:324]: RGB RED VALUE: 86 [03:06:10][D][main:327]: RGB GREEN VALUE: 255 [03:06:10][D][main:330]: RGB BLUE VALUE: 240 [03:06:11][E][nextion:527]: ERROR: Received numeric return but next in queue "set_component_text" is not a valid sensor type 0 [03:06:12][E][nextion:527]: ERROR: Received numeric return but next in queue "set_component_text" is not a valid sensor type 0 [03:06:12][D][nextion:439]: Got touch page=9 component=17 type=PRESS [03:06:12][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON [03:06:12][D][nextion:439]: Got touch page=9 component=17 type=RELEASE [03:06:12][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF [03:06:12][D][main:324]: RGB RED VALUE: 86 [03:06:12][D][main:327]: RGB GREEN VALUE: 255 [03:06:12][D][main:330]: RGB BLUE VALUE: 240 [03:06:14][D][nextion:439]: Got touch page=9 component=17 type=PRESS [03:06:14][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON [03:06:14][D][nextion:439]: Got touch page=9 component=17 type=RELEASE [03:06:14][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF [03:06:14][D][main:324]: RGB RED VALUE: 255 [03:06:14][D][main:327]: RGB GREEN VALUE: 255 [03:06:14][D][main:330]: RGB BLUE VALUE: 255 [03:06:10][D][main:324]: RGB RED VALUE: 86 [03:06:10][D][main:327]: RGB GREEN VALUE: 255 [03:06:10][D][main:330]: RGB BLUE VALUE: 240 [03:06:11][E][nextion:527]: ERROR: Received numeric return but next in queue "set_component_text" is not a valid sensor type 0 [03:06:12][E][nextion:527]: ERROR: Received numeric return but next in queue "set_component_text" is not a valid sensor type 0 [03:06:12][D][nextion:439]: Got touch page=9 component=17 type=PRESS [03:06:12][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON [03:06:12][D][nextion:439]: Got touch page=9 component=17 type=RELEASE [03:06:12][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF [03:06:12][D][main:324]: RGB RED VALUE: 86 [03:06:12][D][main:327]: RGB GREEN VALUE: 255 [03:06:12][D][main:330]: RGB BLUE VALUE: 240 [03:06:14][D][nextion:439]: Got touch page=9 component=17 type=PRESS [03:06:14][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON [03:06:14][D][nextion:439]: Got touch page=9 component=17 type=RELEASE [03:06:14][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF [03:06:14][D][main:324]: RGB RED VALUE: 255 [03:06:14][D][main:327]: RGB GREEN VALUE: 255 [03:06:14][D][main:330]: RGB BLUE VALUE: 255

press around on every side of the screen what are the vallues?

adrianGOO · 2022-12-10T02:16:10Z

3:15:19][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF
[03:15:19][D][main:324]: RGB RED VALUE: 255
[03:15:19][D][main:327]: RGB GREEN VALUE: 255
[03:15:19][D][main:330]: RGB BLUE VALUE: 255
[03:15:19][D][nextion:439]: Got touch page=9 component=17 type=PRESS
[03:15:19][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON
[03:15:19][D][nextion:439]: Got touch page=9 component=17 type=RELEASE
[03:15:19][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF
[03:15:19][D][main:324]: RGB RED VALUE: 255
[03:15:19][D][main:327]: RGB GREEN VALUE: 255
[03:15:19][D][main:330]: RGB BLUE VALUE: 255
[03:15:20][D][nextion:439]: Got touch page=9 component=17 type=PRESS
[03:15:20][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON
[03:15:20][D][nextion:439]: Got touch page=9 component=17 type=RELEASE
[03:15:20][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF
[03:15:20][D][main:324]: RGB RED VALUE: 255
[03:15:20][D][main:327]: RGB GREEN VALUE: 255
[03:15:20][D][main:330]: RGB BLUE VALUE: 255
[03:15:20][D][nextion:439]: Got touch page=9 component=17 type=PRESS
[03:15:20][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON
[03:15:20][D][nextion:439]: Got touch page=9 component=17 type=RELEASE
[03:15:20][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF
[03:15:20][D][main:324]: RGB RED VALUE: 255
[03:15:20][D][main:327]: RGB GREEN VALUE: 255
[03:15:20][D][main:330]: RGB BLUE VALUE: 255
[03:15:20][D][nextion:439]: Got touch page=9 component=17 type=PRESS
[03:15:20][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON
[03:15:20][D][nextion:439]: Got touch page=9 component=17 type=RELEASE
[03:15:20][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF
[03:15:20][D][main:324]: RGB RED VALUE: 193
[03:15:20][D][main:327]: RGB GREEN VALUE: 27
[03:15:20][D][main:330]: RGB BLUE VALUE: 255
[03:15:20][D][nextion:439]: Got touch page=9 component=17 type=PRESS
[03:15:20][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON
[03:15:21][D][nextion:439]: Got touch page=9 component=17 type=RELEASE
[03:15:21][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF
[03:15:21][D][main:324]: RGB RED VALUE: 255
[03:15:21][D][main:327]: RGB GREEN VALUE: 255
[03:15:21][D][main:330]: RGB BLUE VALUE: 255
[03:15:21][D][nextion:439]: Got touch page=9 component=17 type=PRESS
[03:15:21][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON
[03:15:21][D][nextion:439]: Got touch page=9 component=17 type=RELEASE
[03:15:21][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF
[03:15:21][D][main:324]: RGB RED VALUE: 201
[03:15:21][D][main:327]: RGB GREEN VALUE: 44
[03:15:21][D][main:330]: RGB BLUE VALUE: 255
[03:15:21][D][nextion:439]: Got touch page=9 component=17 type=PRESS
[03:15:21][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON
[03:15:21][D][nextion:439]: Got touch page=9 component=17 type=RELEASE
[03:15:21][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF
[03:15:21][D][main:324]: RGB RED VALUE: 255
[03:15:21][D][main:327]: RGB GREEN VALUE: 255
[03:15:21][D][main:330]: RGB BLUE VALUE: 255
[03:15:21][D][nextion:439]: Got touch page=9 component=17 type=PRESS
[03:15:21][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON
[03:15:21][D][nextion:439]: Got touch page=9 component=17 type=RELEASE
[03:15:21][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF
[03:15:21][D][main:324]: RGB RED VALUE: 255
[03:15:21][D][main:327]: RGB GREEN VALUE: 255
[03:15:21][D][main:330]: RGB BLUE VALUE: 255
[03:15:22][D][nextion:439]: Got touch page=9 component=17 type=PRESS
[03:15:22][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state ON
[03:15:22][D][nextion:439]: Got touch page=9 component=17 type=RELEASE
[03:15:22][D][binary_sensor:036]: 'nspanel-dev Color Wheel': Sending state OFF
[03:15:22][D][main:324]: RGB RED VALUE: 255
[03:15:22][D][main:327]: RGB GREEN VALUE: 255
[03:15:22][D][main:330]: RGB BLUE VALUE: 255

adrianGOO · 2022-12-10T02:16:48Z

these are the results from wheel surface.

adrianGOO · 2022-12-10T02:25:20Z

Anyway thank you so much friend for you shared time, If you find out the solution in the next days please let me know. Thank you one more time.

NSpanel color wheel script problem #1

NSpanel color wheel script problem #1

Comments

nicoCRX commented Mar 16, 2022

ilyavolodin commented Mar 16, 2022

nicoCRX commented Mar 17, 2022

ckegels commented Jul 31, 2022 • edited

ilyavolodin commented Jul 31, 2022

ckegels commented Jul 31, 2022

ckegels commented Jul 31, 2022

ilyavolodin commented Jul 31, 2022

adrianGOO commented Dec 9, 2022

ckegels commented Dec 9, 2022

adrianGOO commented Dec 10, 2022

ckegels commented Dec 10, 2022 • edited

ckegels commented Dec 10, 2022

adrianGOO commented Dec 10, 2022

ckegels commented Dec 10, 2022

adrianGOO commented Dec 10, 2022 • edited

ckegels commented Dec 10, 2022

Name the device and it's entities

global varibles.

RGB CONTROLER

adrianGOO commented Dec 10, 2022

ckegels commented Dec 10, 2022

ckegels commented Dec 10, 2022 • edited

adrianGOO commented Dec 10, 2022

ckegels commented Dec 10, 2022 • edited

ckegels commented Dec 10, 2022

Name the device and it's entities

global varibles.

RGB CONTROLER

adrianGOO commented Dec 10, 2022

ckegels commented Dec 10, 2022

ckegels commented Dec 10, 2022

adrianGOO commented Dec 10, 2022 • edited

ckegels commented Dec 10, 2022

adrianGOO commented Dec 10, 2022

ckegels commented Dec 10, 2022

adrianGOO commented Dec 10, 2022

adrianGOO commented Dec 10, 2022

adrianGOO commented Dec 10, 2022

ckegels commented Dec 10, 2022

ckegels commented Dec 10, 2022

adrianGOO commented Dec 10, 2022

adrianGOO commented Dec 10, 2022

ckegels commented Dec 10, 2022

adrianGOO commented Dec 10, 2022

ckegels commented Dec 10, 2022

ckegels commented Dec 10, 2022

adrianGOO commented Dec 10, 2022

ckegels commented Dec 10, 2022

ckegels commented Dec 10, 2022

ckegels commented Dec 10, 2022

ckegels commented Dec 10, 2022

Version 2022-01-19

Name the device and it's entities

global varibles.

Example config.yaml

Wifi settings. Add these to your secrets.yaml. fast_connect must be true for a hidden ssid.

API. Add api_pwd to your secrets.yaml.

Time component that fetches time from Home Assistant and updates the display once a minute and when the display is ready at bootup (and time is available).

Logger. Disable the temperature sensor etc. to focus on the HMI development

OTA (Over the air updates) password. Add to your secrets.yaml

Uart for the Nextion display

Functionality for the Nextion display

A reboot button is always useful

Binary sensors

Buttons on the Music page

LIGHTS BUTTONS

RGB CONTROLER

COVER BUTTONS

SCENES BUTTONS

MUSIC BUTTONS

FAVORITE RADIOS

Air Condition buttons

Thermostat UP & Down

Buzzer for playing tones

Physical relay 1

Physical relay 2

ckegels commented Jul 31, 2022 •

edited

ckegels commented Dec 10, 2022 •

edited

adrianGOO commented Dec 10, 2022 •

edited

ckegels commented Dec 10, 2022 •

edited

ckegels commented Dec 10, 2022 •

edited

adrianGOO commented Dec 10, 2022 •

edited

adrianGOO commented Dec 10, 2022 •

edited