Broken colors on launch with srgb on hdr monitor

[Username404-59]

With my config:

monitorv2 {
  output = eDP-1
  mode = 2880x1800@120
  position = 0x0
  scale = 1.5
  cm = srgb #hdredid
  bitdepth = 10
  min_luminance = 0.0
  max_luminance = 2000
  sdr_min_luminance = 0.005
  sdr_max_luminance = 350
  #sdrsaturation = 1.175
  #sdrbrightness = 0.975
}

Colors look oversaturated when I launch hyprland
If I replace srgb with hdredid, they're not anymore but the colors look greyish
If I replace it back with srgb after that, for some reason the colors are fixed (although brightness is lowered)

[ssareta]

I am guessing its cuz ur on high bit depth monitor mode but forcing srgb. Either try cm = wide or cm = edid with bitdepth = 10, or lower bitdepth to 8 with srgb

[ssareta]

And check your monitor settings too, it may have a switch in the settings - you prob want to set that to srgb if you do indeed want to use srgb

[Username404-59]

And check your monitor settings too, it may have a switch in the settings - you prob want to set that to srgb if you do indeed want to use srgb

Forgot to mention I'm on a laptop; there's no screen settings (its name is SDC419F)

[Username404-59]

I am guessing its cuz ur on high bit depth monitor mode but forcing srgb. Either try cm = wide or cm = edid with bitdepth = 10, or lower bitdepth to 8 with srgb

neither wide or edid with bitdepth=10 helped (they did the same thing as srgb)

I'll put srgb + bitdepth=8 and report back next time I reboot

[Username404-59]

I'll put srgb + bitdepth=8 and report back next time I reboot

Yep it didn't fix the issue