heinz.yaml

substitutions:
  l_name: heinz
  u_name: Heinz

esphome:
  name: $l_name
  platform: ESP8266
  board: esp01_1m

wifi: 
  networks:
  - ssid: Mary Poppins
    password: supercalifragilisticexpialidocious

# Enable logging
logger:

# Enable Home Assistant API
api:
  services:
    - service: flash
      then:
        - output.turn_on: output1
        - delay: 150ms
        - output.turn_off: output1
        - delay: 150ms
        - output.turn_on: output1
        - delay: 150ms
        - output.turn_off: output1
        - delay: 150ms
        - output.turn_on: output1
        - delay: 150ms
        - output.turn_off: output1
        - delay: 150ms
        - if:
            condition:
              light.is_on: light1
            then:
              - output.turn_on: output1
    - service: restart
      then:
        - switch.toggle: restart_my_esp

ota:


binary_sensor:
  - platform: gpio
    pin:
      number: GPIO0
      mode: INPUT_PULLUP
      inverted: True
    name: "$u_name button"
    on_press:
      - light.toggle: light1

light:
  - platform: binary
    name: "$u_name"
    id: light1
    output: output1

output:
  - platform: gpio
    pin: GPIO12
    id: output1

status_led:
  pin:
    number: GPIO13
    inverted: yes

sensor:
  - platform: wifi_signal
    name: "$u_name WiFi signal"
    update_interval: 60s

  - platform: uptime
    name: "$u_name uptime"
    
switch:
  - platform: restart
    id: restart_my_esp

text_sensor:
  - platform: wifi_info
    ip_address:
      name: "$u_name IP"