Add Seagate Barracuda 2TB 7200rpm SATA3

[PPed72]

Please add the following hard disk to hddtemp.db:
"ST2000DM006-2DM164" 194 C "Seagate Barracuda 2TB SATA3 7200RPM 64MB"

# hddtemp /dev/sdb --debug

================= hddtemp 0.3-beta15 ==================
Model: ST2000DM006-2DM164

field(1)         = 208
field(3)         = 0
field(4)         = 5
field(5)         = 0
field(7)         = 113
field(9)         = 35
field(10)        = 0
field(12)        = 5
field(183)       = 0
field(184)       = 0
field(187)       = 0
field(188)       = 0
field(189)       = 2
field(190)       = 37
field(191)       = 0
field(192)       = 2
field(193)       = 85
field(194)       = 37
field(197)       = 0
field(198)       = 0
field(199)       = 0
field(240)       = 24
field(241)       = 241
field(242)       = 11

If one of the field value seems to match the temperature, be sure to read
the hddtemp man page before sending a report (section REPORT). Thanks.

# smartctl -i /dev/sdb
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.16.1-gentoo] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 3.5
Device Model:     ST2000DM006-2DM164
Serial Number:    Z560QPTV
LU WWN Device Id: 5 000c50 0b02d1030
Firmware Version: CC26
User Capacity:    2,000,398,934,016 bytes [2,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Apr  9 18:39:49 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled`

See also https://bugs.gentoo.org/652806