Class=1 (0x01) - Alarm functionality

CLASS1.ALARM

Description

Alarm events that indicate that something not ordinary has occurred. Note that the priority bits can be used as a mean to level alarm for severity.

Type=0 (0x00) - General event :id=type0

VSCP_TYPE_ALARM_GENERAL

General Event.

Type=1 (0x01) - Warning :id=type1

VSCP_TYPE_ALARM_WARNING

Indicates a warning condition.

Data byte	Description
0	0=off. 1=on.
1	Zone for which event applies to (0-255). 255 is all zones.
2	Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.

Type=2 (0x02) - Alarm occurred :id=type2

VSCP_TYPE_ALARM_ALARM

Indicates an alarm condition.

Data byte	Description
0	Alarm byte from standard register 128/0x80 or a code of choice describing the alarm.
1	Zone for which event applies to (0-255). 255 is all zones.
2	Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If byte 0 is zero this event can be interpreted as alarm-reset.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.

Type=3 (0x03) - Alarm sound on/off :id=type3

VSCP_TYPE_ALARM_SOUND

Alarm sound should be turned on or off.

Data byte	Description
0	0=off. 1=on.
1	Zone for which event applies to (0-255). 255 is all zones.
2	Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.

Type=4 (0x04) - Alarm light on/off :id=type4

VSCP_TYPE_ALARM_LIGHT

Alarm light should be turned on or off.

Data byte	Description
0	0=off. 1=on.
1	Zone for which event applies to (0-255). 255 is all zones.
2	Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.

Type=5 (0x05) - Power on/off :id=type5

VSCP_TYPE_ALARM_POWER

Power has been lost or is available again.

Data byte	Description
0	0=off. 1=on.
1	Zone for which event applies to (0-255). 255 is all zones.
2	Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.

Type=6 (0x06) - Emergency Stop :id=type6

VSCP_TYPE_ALARM_EMERGENCY_STOP

Emergency stop has been hit/activated. All systems on the zone/sub-zone should go to their inactive/safe state.

Data byte	Description
0	0=off. 1=on.
1	Zone for which event applies to (0-255). 255 is all zones.
2	Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.

Type=7 (0x07) - Emergency Pause :id=type7

VSCP_TYPE_ALARM_EMERGENCY_PAUSE

Emergency pause has been hit/activated. All systems on the zone/sub-zone should go to their inactive/safe state but preserve there settings.

Data byte	Description
0	0=off. 1=on.
1	Zone for which event applies to (0-255). 255 is all zones.
2	Sub-zone for which event applies to (0-255). 255 is all subzones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.

Type=8 (0x08) - Emergency Reset :id=type8

VSCP_TYPE_ALARM_EMERGENCY_RESET

Issued after an emergency stop or pause in order for nodes to reset and start operating .

Data byte	Description
0	0=off. 1=on.
1	Zone for which event applies to (0-255). 255 is all zones.
2	Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.

Type=9 (0x09) - Emergency Resume :id=type9

VSCP_TYPE_ALARM_EMERGENCY_RESUME

Issued after an emergency pause in order for nodes to start operating from where they left of without resetting their registers .

Data byte	Description
0	0=off. 1=on.
1	Zone for which event applies to (0-255). 255 is all zones.
2	Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.

Type=10 (0x0A) - Arm :id=type10

VSCP_TYPE_ALARM_ARM

Issued after an alarm system has been armed.

Data byte	Description
0	0=off. 1=on.
1	Zone for which event applies to (0-255). 255 is all zones.
2	Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.

Type=11 (0x0B) - Disarm :id=type11

VSCP_TYPE_ALARM_DISARM

Issued after an alarm system has been disarmed.

Data byte	Description
0	0=off. 1=on.
1	Zone for which event applies to (0-255). 255 is all zones.
2	Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.

Type=12 (0x0C) - Watchdog :id=type12

VSCP_TYPE_ALARM_WATCHDOG

Issued when a watchdog has been triggered.

Data byte	Description
0	index.
1	Zone for which event applies to (0-255). 255 is all zones.
2	Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.

Type=13 (0x0D) - Alarm reset :id=type13

VSCP_TYPE_ALARM_RESET

Indicates an alarm reset condition.

Data byte	Description
0	Alarm byte from standard register 128/0x80 or a code of choice describing the alarm.
1	Zone for which event applies to (0-255). 255 is all zones.
2	Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.