Skip to content

Latest commit

 

History

History
216 lines (164 loc) · 9.89 KB

acme_ca.md

File metadata and controls

216 lines (164 loc) · 9.89 KB
Raw

ACME CA handler

Using acme2certifier to proxy requests towards acme-endpoints sounds like a silly idea?

Not at all... Just think about the following use-cases:

  • You would like to use certificates from Letsencrypt or ZeroSSL for servers in your internal network without exposing your systems to the internet
  • You are using a commercial acme-server (Entrust, Netnumber, Sectigo) with pre-authenticated domains. You would like to provide access across an organization without sharing the commercial endpoint private key.

Especially the first use-case is an interesting one. However it comes with a couple of requirements related to your network and your dns configuration as CAs used for certificate issuance need to connect to acme2certier for http challenge validation. That means that:

  • your acme2certifer server need to be accessible from the Internet.
  • the DNS domain you are using internally must be a official one and you need to have ownership on it
  • you need to provide different sets of dns information depending on the source address of the DNS request. Your internal clients and server (including acme2certifier) need to resolve the addresses of your internal network while external systems (especially the CA servers) need get the (external) address of acme2certifier when querying the same namespace. In my test environment I fulfill this requirement by:
    • separating external and internal DNS onto different systems
    • creating a wildcard record on my external DNS (*.foo.com) pointing to acme2certifier
    • using the internal DNS on my acme2certifier instance
    • optional: using the external DNS server as forwarder for the internal DNS server

As of today the acme_ca_handler supports following operations:

  • account registration
  • http challenge validation
  • certificate enrollment
  • certificate revocation

Supported CAs

Prerequisites

Again, it is important to mention that the handler validates challenges over http. Thus, it must be ensured that the http requests from the CA server are ending up at acme2certifier.

Configuration

The handler must be configured via acme_srv.

Option Description mandantory default
handler_file path to ca_handler file yes None
account_path path to account ressource on ca server no '/acme/acct'
acme_url url of the acme endpoint yes None
acme_account acme account name. If not specified acme2certifer will try to lookup the account name based on the key-file no None
acme_keyfile Path to private key json-format. If specified in config but not existing on file-system acme2certifer will generate a new key and try to register it no None
acme_keypath Path to private key directory. If specified in config acme2certifer store new keys in this directory no None
acme_account_email email address used to register a new account no None
allowed_domainlist list of domain-names allowed for enrollment in json format example: ["bar.local$, bar.foo.local] no []
directory_path path to directory ressource on ca server no '/directory'
eab_profiling enable eab-profiling None False
ssl_verify verify certificates on SSL connections no True
  • modify the server configuration (acme_srv/acme_srv.cfg) and add at least the following parameters.
[CAhandler]
# CA specific options
handler_file: examples/ca_handler/acme_ca_handler.py
acme_url: https://some.acme/endpoint
acme_keyfile: /path/to/privkey.json

Example configuration for Letsencrypt

Below the configuration example can be used to connect to Letsencrypt staging server.

[CAhandler]
acme_keyfile: acme_srv/acme/le_staging_private_key.json
# use this url to connect to LE staging server for testing
acme_url: https://acme-staging-v02.api.letsencrypt.org
acme_account_email: [email protected]

If you are able to enroll from the LE staging server move to production by changing the acme_keyfile and acme_url as below.

acme_url: https://acme-v02.api.letsencrypt.org
acme_keyfile: /var/www/acme2certifier/volume/acme/le_private_key.json

Example configuration for BuyPass.com CA

Below the configuration example which can be used to connect to Buypass test server.

acme_keyfile: acme_srv/acme/bypass_test_private_key.json
acme_url: https://api.test4.buypass.no/acme
acme_account_email: [email protected]

Once you are able to enroll you can move to the production environment with the below changes.

acme_keyfile: acme_srv/acme/bypass_prod_private_key.json
acme_url: https://api.buypass.com/acme
acme_account_email: [email protected]

Example for ZeroSSL CA

Below a configuration to connect to ZeroSSL

acme_keyfile: acme_srv/acme/zerossl.json
acme_url: https://acme.zerossl.com/v2/DV90
acme_account_email: [email protected]
account_path: /account/

Example for smallstep ca

Below a configuration to connect to a smallstep ca under the assumption that a provisioner called myacme has been created.

acme_keyfile: acme_srv/acme/smallstep.json
acme_url: https://<fqdn>/acme/myacme
acme_account_email: [email protected]
account_path: /
ssl_verify: False

Example key-file in json format

This is just an example for your reference. DO NOT USE IT ON YOUR SYSTEM!

As said above. The key-file gets generated by the ca-handler if configured but not present on the system.

You can also use existing keys generated by certbot which are usually stored in /etc/letsencrypt/account

{"e": "AQAB",
 "d": "rL9Rf88G8Jg5zg1PKT1XBDwSIMYZrjld1mpZo-RE3qLBreusf8C6_rr_MIMTV7vneJT-AOPzSJHhELeA-9A2p5458KreekqWkXmFiP7L5gAUPdiZWkDxraOzoyqQdaidxaresxd7aaWH4BENbFimhfcCT453SX7GLSF9W_RKlgWfnE-yYGpT2Wq__Rkn2zOSZ5RvSOjI_Y5dIDBi8fBS-L5p6-5MhDcjyeDH8uUko8xLZZo2T_PGzY2oWu4xrC7iPBSN6fcAlHPyFvi1GqmC1_Flniy4aRooAgOq0fwIgLuVpmZpA5KSaEGRkrIx95eR-GjwgQ",
 "n": "2dGTKkgj7vlQNzLvIOJUuUmEfv8RAQAFHwzijrTm6itEDU4bt5BiqXdaerxesda-dIMDbnTQFDmyaPSi3Gp71ZSuxiPgpv2E9wa-kc5aHnT2zaj3DeGbtKO4_5NWqyD3S2bmsL1ABj6cv2Pr2Z8RqeNBKa4jdaIdifawkdrF0wAXqlpxM8nYvKfKnsOpWyr5qw1cIXcaqq_bQS7znT-hh9ay8fdWiDAvSrJvtv6R-4hPm-iA6kuwRTpDSfreN27dr4pu8PUXw8ukxnF_qdIP0AD_r0BvpmNsHIA0HDyg9afcqUj_K42yiKhr4HHNU3Ih_SSjdtw",
 "q": "5FrWQJ9BEFIf0LD3lm7OxDTc2eyqY9a508vpL9qcd-ZbC7VT24oeeGZEnyVoLoO4n0TFUSFUSmXMI7jAkQqu_wpF-hAhSWx3NY89MwRDWCbLVnvXNk-wlbZcwp8hd10Th7iFCDCFy-y8BCemHAqO5G5NAWW6rxyZzK6KILRJ1AW8",
 "p": "9DAze8mv65CFZizX7NTxMzxp1OLSAqQzt-AiXeaidA32dEY4Qj7wTSVmvZmihsI-lV6Oyax_IWvrISijPS8xR6OxgZb8wSqdLla9sXo92my6lOcdC6GG5bGq_tQXIAfKlt23kUCmwt_WN85Ef8Fm2Ftqd5HAnyMxfaf734Zm_NDk",
 "kty": "RSA",
 "qi": "6X2IOmZ3JYacHF0smIhr6URhnYdUA4O1Hqa4OIZfJGqGfW2jbG1C0X-i38ct-oc3CBoyeEM13BmrSiipyEI0pM1pU4GezXn0TSth1cuaskcy9Z0rDBEb3Y7FL7AwG3RPgoPKVUJ9mbt1z9VESuYZgshnm2a83aduzedfye3WON8PDbOM",
 "dp": "jUURk-0UDKlYs8r_xLFRNb4e0B3FN-f9T8cXPAVcVTlG4kIZTL6XPdlYA1xHJtmD45b90sHZbOEnXNgNTaHQRXvzLQoWCyqMLPYHMRG4oYCz8CBakgxvdMyxSi4lDxNtUhiOfN4RseurCx2Lp8aO9azackaeiadfayx4ek",
 "dq": "cVUb7KqdUgpQO_T4jDKmb_6EdavdzPsu8wzKyLNI4MD1AtSVr-nWwY6QFCQulpdNM86nR0lmwadieuaxaeressdNW5RR0O0CJRTYHM_K1J88X8nKv-vBCiyd0QHFTEZngP51F-FtJg5yKeW7rUMYNAsCMOVaR7p8InelmiGgWpgU"
}

Passing a profileID from client to server

The handler makes use of the header_info_list feature allowing an acme-client to specify acme-backend address to be used during certificate enrollment. This feature is disabled by default and must be activate in acme_srv.cfg as shown below

[Order]
...
header_info_list: ["HTTP_USER_AGENT"]

The acme-client can then specify the acme_url as part of its user-agent string.

Example for acme.sh:

docker exec -i acme-sh acme.sh --server http://<acme-srv> --issue -d <fqdn> --standalone --useragent acme_url=<acme-server url> --debug 3 --output-insecure

Example for lego:

docker run -i -v $PWD/lego:/.lego/ --rm --name lego goacme/lego -s http://<acme-srv> -a --email "[email protected]" --user-agent acme_url=<acme-server url> -d <fqdn> --http run

eab profiling

This handler can use the eab profiling feture to allow individual enrollment configuration per acme-account as well as restriction of CN and SANs to be submitted within the CSR. The feature is disabled by default and must be activated in acme_srv.cfg

Important: In case acme_url variables will be specified in a profile (like for 'keyid_00' in the below example), the acme_key_path parameter must be set in acme_srv.cfg to ensure that the different key_files are being stored correctly.

[EABhandler]
eab_handler_file: examples/eab_handler/kid_profile_handler.py
acme_key_path: <path>

[CAhandler]
eab_profiling: True

below an example key-file:

{
  "keyid_00": {
    "hmac": "V2VfbmVlZF9hbm90aGVyX3ZlcnkfX2xvbmdfaG1hY190b19jaGVja19lYWJfZm9yX2tleWlkXzAwX2FzX2xlZ29fZW5mb3JjZXNfYW5faG1hY19sb25nZXJfdGhhbl8yNTZfYml0cw",
    "cahandler": {
      "acme_url": ["https://acme-staging-v02.api.letsencrypt.org", "https://api.buypass.com/acme", "https://acme.ssl.com/sslcom-dv-rsa"],
      "allowed_domainlist": ["www.example.com", "www.example.org", "*.acme"]
    }
  },
  "keyid_01": {
    "hmac": "YW5vdXRoZXJfdmVyeV9sb25nX2htYWNfZm9yX2tleWlkXzAxX3doaWNoIHdpbGxfYmUgdXNlZF9kdXJpbmcgcmVncmVzc2lvbg",
    "cahandler": {
      "acme_url": "https://acme-staging-v02.api.letsencrypt.org",
      "acme_keyfile": "/var/www/acme2certifier/volume/acme_ca/le_key.json",
      "allowed_domainlist": ["www.example.com", "www.example.org", "*.acme"]
    }
  },
  "keyid_02": {
    "hmac": "dGhpc19pc19hX3ZlcnlfbG9uZ19obWFjX3RvX21ha2Vfc3VyZV90aGF0X2l0c19tb3JlX3RoYW5fMjU2X2JpdHM",
    "cahandler": {
      "allowed_domainlist": ["www.example.com", "www.example.org"]
    }
  },
  "keyid_03": {
    "hmac": "YW5kX2ZpbmFsbHlfdGhlX2xhc3RfaG1hY19rZXlfd2hpY2hfaXNfbG9uZ2VyX3RoYW5fMjU2X2JpdHNfYW5kX3Nob3VsZF93b3Jr"
  }
}