diff --git a/tutorials/02_installation.md b/tutorials/02_installation.md
index a8f68fa00..20ab10f78 100644
--- a/tutorials/02_installation.md
+++ b/tutorials/02_installation.md
@@ -1,15 +1,17 @@
 \page installation Installation
 
-This tutorial describes how to install Ignition Physics on Ubuntu Linux and macOS via either a binary distribution or from source. Support for Windows is coming soon.
+This tutorial describes how to install Ignition Physics via either a binary distribution or from source.
 
 ## Ubuntu
 
+### Prerequisites
+
 Ignition Physics uses several c++17 features which are not available in the
 version of gcc supplied with Ubuntu Xenial, so Ubuntu Bionic or later
 is required.
 
 If you don't already have the `lsb-release` package installed, please do so now:
-```{.sh}
+```
 sudo apt-get update
 sudo apt-get install lsb-release
 ```
@@ -17,64 +19,66 @@ sudo apt-get install lsb-release
 Setup your computer to accept software from
 [packages.osrfoundation.org](http://packages.osrfoundation.org):
 
-```{.sh}
+```
 sudo sh -c 'echo "deb http://packages.osrfoundation.org/gazebo/ubuntu-stable `lsb_release -cs` main" > /etc/apt/sources.list.d/gazebo-stable.list'
 ```
 
 Setup keys:
 
-```{.sh}
+```
 wget http://packages.osrfoundation.org/gazebo.key -O - | sudo apt-key add -
 ```
 
-**Install Ignition Physics binaries**
+### Binary Install
 
-```{.sh}
+```
 sudo apt-get update
 sudo apt-get install libignition-physics<#>-dev
 ```
 
 Be sure to replace `<#>` with a number value, such as `1` or `2`, depending on which version you need.
 
-**Build from source**
+### Source Install
 
 1. Run the following to install dependencies
-  ```{.sh}
-  sudo apt-add-repository -s "deb http://packages.osrfoundation.org/gazebo/ubuntu-stable $(lsb_release -c -s) main"
-  sudo apt-get build-dep -y ignition-physics<#>-dev
-  ```
-  Be sure to replace `<#>` with a number value, such as `1` or `2`, depending on which version you need.
+    ```
+    sudo apt-add-repository -s "deb http://packages.osrfoundation.org/gazebo/ubuntu-stable $(lsb_release -c -s) main"
+    sudo apt-get build-dep -y ignition-physics<#>-dev
+    ```
+    Be sure to replace `<#>` with a number value, such as `1` or `2`, depending on which version you need.
 
 
 2. Use gcc-8:
-  ```
-  sudo apt update
-  sudo apt-get -y install g++-8
-  sudo update-alternatives --install \
-    /usr/bin/gcc gcc /usr/bin/gcc-8 800 \
-    --slave /usr/bin/g++ g++ /usr/bin/g++-8 \
-    --slave /usr/bin/gcov gcov /usr/bin/gcov-8
-  ```
+    ```
+    sudo apt update
+    sudo apt-get -y install g++-8
+    sudo update-alternatives --install \
+      /usr/bin/gcc gcc /usr/bin/gcc-8 800 \
+      --slave /usr/bin/g++ g++ /usr/bin/g++-8 \
+      --slave /usr/bin/gcov gcov /usr/bin/gcov-8
+    ```
 
 3. Clone the repository
-  ```
-  git clone https://github.com/ignitionrobotics/ign-physics -b ign-physics<#>
-  ```
-  Be sure to replace `<#>` with a number value, such as `1` or `2`, depending on which version you need.
+    ```
+    git clone https://github.com/ignitionrobotics/ign-physics -b ign-physics<#>
+    ```
+    Be sure to replace `<#>` with a number value, such as `1` or `2`, depending on which version you need.
 
 
 4. Configure and build
-  ```
-  cd ign-physics; mkdir build; cd build; cmake ..; make
-  ```
+    ```
+    cd ign-physics; mkdir build; cd build; cmake ..; make
+    ```
 
 5. Optionally, install Ignition Physics
-  ```
-  sudo make install
-  ```
+    ```
+    sudo make install
+    ```
 
 ## macOS
 
+### Prerequisites
+
 Ignition Physics and several of its dependencies can be installed on macOS
 with [Homebrew](http://brew.sh/) using the [osrf/simulation
 tap](https://github.com/osrf/homebrew-simulation). Ignition Physics uses
@@ -82,28 +86,28 @@ several c++17 features which are not available in macOS High Sierra (10.13)
 and earlier, so macOS Mojave (10.14) with XCode 10.1 are the minimum
 system requirements.
 
-**Install Binaries using Homebrew**
+### Install Binaries using Homebrew
 
 Install homebrew, which should also prompt you to install the XCode
 command-line tools:
 
-```{.sh}
+```
 ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
 ```
 
 Run the following commands:
 
-```{.sh}
+```
 brew tap osrf/simulation
 brew install ignition-physics<#>
 ```
 Be sure to replace `<#>` with a number value, such as `1` or `2`, depending on which version you need.
 
 
-**Build from source using Homebrew**
+### Build from source using Homebrew
 
 Run the following to install dependencies
-```{.sh}
+```
 brew tap osrf/simulation
 brew install ignition-physics<#> --only-dependencies
 ```
@@ -111,13 +115,13 @@ brew install ignition-physics<#> --only-dependencies
 Be sure to replace `<#>` with a number value, such as `1` or `2`, depending on which version you need.
 
 Clone the ign-physics repository from GitHub
-```{.sh}
+```
 git clone https://github.com/ignitionrobotics/ign-physics -b ign-physics<#>
 ```
 Be sure to replace `<#>` with a number value, such as `1` or `2`, depending on which version you need.
 
 Then build using CMake
-```{.sh}
+```
 cd ign-physics
 mkdir build
 cd build
@@ -125,3 +129,66 @@ cmake ..
 make
 sudo make install
 ```
+
+## Windows
+
+### Prerequisites
+
+First, follow the [ign-cmake](https://github.com/ignitionrobotics/ign-cmake) tutorial for installing Conda, Visual Studio, CMake, etc., prerequisites, and creating a Conda environment.
+
+Navigate to ``condabin`` if necessary to use the ``conda`` command (i.e., if Conda is not in your `PATH` environment variable. You can find the location of ``condabin`` in Anaconda Prompt, ``where conda``).
+
+Create if necessary, and activate a Conda environment:
+
+```
+conda create -n ign-ws
+conda activate ign-ws
+```
+
+### Binary Install
+
+```
+conda install libignition-physics<#> --channel conda-forge
+```
+
+Be sure to replace `<#>` with a number value, such as 1 or 2, depending on
+which version you need.
+
+### Source Install
+
+1. Install Ignition dependencies:
+
+You can view available versions and their dependencies:
+
+```
+conda search libignition-physics* --channel conda-forge --info
+```
+
+Install dependencies, replacing `<#>` with the desired versions:
+
+```
+conda install libignition-cmake<#> libignition-common<#> libignition-math<#> libignition-plugin<#> libsdformat<#> --channel conda-forge
+```
+
+1. Navigate to where you would like to build the library, and clone the repository.
+
+    ```
+    # Optionally, append `-b ign-physics#` (replace # with a number) to check out a specific version
+    git clone https://github.com/ignitionrobotics/ign-physics.git
+    ```
+
+1. Configure and build
+
+    ```
+    cd ign-physics
+    mkdir build
+    cd build
+    cmake .. -DBUILD_TESTING=OFF  # Optionally, -DCMAKE_INSTALL_PREFIX=path\to\install
+    cmake --build . --config Release
+    ```
+
+1. Optionally, install
+
+    ```
+    cmake --install . --config Release
+    ```