Replies: 2 comments
-
|
Yes, unfortunately that could be a hardware issue from Olimex which we coudln't completely solve yet because all my testers in the end did not follow up on me :(. If you are willing to make some tests and are comfortable with editing BSB-LAN's sourcecode, I'd be willing to guide you through the process. Because of course, if there is anything that I can do on the source-code side, then I'm happy to do that. But since I don't have PoE myself, I cannot test it myself... |
Beta Was this translation helpful? Give feedback.
-
|
I've created an issue from this in order to give it a higher priority: #715 |
Beta Was this translation helpful? Give feedback.
-
Hi!
In November 2024 I updated my BSB-LAN setup from Arduino Due to Olimex ESP32-PoE-ISO. One of my goals was to power it with PoE only.
But BSB-LAN on the ESP32 did never run as stable as on the Due and frequently rebooted especially if I browsed the Web-UI. I was unable to debug this issue but at some point I realized the issue did not occur as long as my PC was connected via USB for debugging.
After that I "fixed" the issue by powering the ESP32-PoE-ISO with a 5V power supply. Today I have an uptime of 42 days on version 4.2.37-20241207010916. But I still would like to get rid of the extra 5V power supply...
PoE is providet by an Unifi USW-24-PoE rated at 44-57V (Pins 1, 2+; 3, 6-).
I'm not 100% sure but remamber having instant issues wenn calling bsb-lan web pages that trigger BSB bus communication and slightly less instant issues when calling pages like /C or the index page that do not trigger BSB communication.
Does anyone have the same issue or any clue why PoE is not sufficient?
Regards!
Beta Was this translation helpful? Give feedback.
All reactions