Skip to content

Latest commit

 

History

History
42 lines (23 loc) · 1.24 KB

README.md

File metadata and controls

42 lines (23 loc) · 1.24 KB

My Custom Tildagon Firmware

This is my own version of the standard EMF Tildagon Firmware I did not write a lot of the code, the amazing EMF badge team did.

Building

Pull the firmware build image:

docker pull matthewwilkes/esp_idf:5.2.1

(Or build it yourself, if you prefer):

docker build . -t matthewwilkes/esp_idf:5.2.1

Initialize submodules:

git submodule update --init --recursive

To make the docker container with the right version of the ESP-IDF for the latest micropython.

Before you build the first time, apply any patches to vendored content:

./scripts/firstTime.sh

Then to build the images run:

docker run -it --rm --env "TARGET=esp32s3" -v "$(pwd)"/:/firmware matthewwilkes/esp_idf:5.2.1

Alternatively, to flash a badge: put the badge into bootloader by disconnecting the usb in, press and hold bat and boop buttons for 20 seconds then reconnect the usb in and run:

docker run -it --rm --device /dev/ttyACM0:/dev/ttyUSB0 --env "TARGET=esp32s3" -v "$(pwd)"/:/firmware matthewwilkes/esp_idf:5.2.1 deploy

where /dev/ttyACM0 is the device's endpoint. This value is correct on Linux.

Contributing

Please install pre-commit to ensure ruff is run:

python3 -m pip install pre-commit
pre-commit install