Curve Helper Simply Isn't Working Correctly

[chris1892006]

Hi, I'm trying to dial in my 5600 xt & everytime I use the curve helper & apply it to YAABE avfs GFX, it corrupts the curve & screws everything up every single time. Only the default curve works but without the proper voltages and frequency.

**Can you look at my VBIOS & adjust it only for these settings?

3000 max gfx overdrive frequency
1500 (3000) memory max overdrive frequency
1.250V or 1250mv max gfx voltage for overdrive

default frequency 2040mhz core @ 1.050V or 1050mv & 1952mhz memory default (ie 976 in YAABE)**

Red.Dragon.5600.XT.Custom.Unlocked.Modifiable.VBIOS.zip

May you advise on how to get it to work properly?

Every single setting doesn't work, I've tried for 2 days now & with no luck. I've been working on it a solid 36 hours or so. Nothing. If we need to open a discussion. Please do so @datspike

Thank you so much for your efforts

[datspike]

@chris1892006 sorry for late reply
Did I understand correctly, that you're not using the MorePowerTool to set a curve?
Seems like you're trying to use some kind of bios editor
Did you try setting OverrideAvfsGb (GX) to 0x01? Sounds like it would be True and then qAvfsGb (GFX) settings you've set should work.