toyota_prius_2017_pt_generated.dbc

CM_ "AUTOGENERATED FILE, DO NOT EDIT"


CM_ "Imported file _comma.dbc starts here"
BO_ 359 STEERING_IPAS_COMMA: 8 IPAS
 SG_ STATE : 7|4@0+ (1,0) [0|15] "" XXX
 SG_ ANGLE : 3|12@0- (1.5,0) [-510|510] "deg" XXX
 SG_ SET_ME_X10 : 23|8@0+ (1,0) [0|255] "" XXX
 SG_ SET_ME_X00 : 31|8@0+ (1,0) [0|255] "" XXX
 SG_ DIRECTION_CMD : 38|2@0+ (1,0) [0|3] "" XXX
 SG_ SET_ME_X40 : 47|8@0+ (1,0) [0|255] "" XXX
 SG_ SET_ME_X00 : 55|8@0+ (1,0) [0|255] "" XXX
 SG_ CHECKSUM : 63|8@0+ (1,0) [0|255] "" XXX

CM BO_ STEERING_IPAS_COMMA "Copy of msg 614 so we can do angle control while the Park Assist ECU is connected (Panda spoofs 614 with 359 on connector J70). Note that addresses 0x266 and 0x167 are checksum-invariant";


CM_ "Imported file _toyota_2017.dbc starts here"
VERSION ""


NS_ :
    NS_DESC_
    CM_
    BA_DEF_
    BA_
    VAL_
    CAT_DEF_
    CAT_
    FILTER
    BA_DEF_DEF_
    EV_DATA_
    ENVVAR_DATA_
    SGTYPE_
    SGTYPE_VAL_
    BA_DEF_SGTYPE_
    BA_SGTYPE_
    SIG_TYPE_REF_
    VAL_TABLE_
    SIG_GROUP_
    SIG_VALTYPE_
    SIGTYPE_VALTYPE_
    BO_TX_BU_
    BA_DEF_REL_
    BA_REL_
    BA_DEF_DEF_REL_
    BU_SG_REL_
    BU_EV_REL_
    BU_BO_REL_
    SG_MUL_VAL_

BS_:

BU_: XXX DSU HCU EPS IPAS

BO_ 36 KINEMATICS: 8 XXX
 SG_ ACCEL_Y : 33|10@0+ (1,-512) [0|65535] "" XXX
 SG_ YAW_RATE : 1|10@0+ (1,-512) [0|65535] "" XXX
 SG_ STEERING_TORQUE : 17|10@0+ (1,-512) [0|65535] "" XXX

BO_ 166 BRAKE: 8 XXX
 SG_ BRAKE_AMOUNT : 7|8@0+ (1,0) [0|255] "" XXX
 SG_ BRAKE_PEDAL : 23|8@0+ (1,0) [0|255] "" XXX

BO_ 170 WHEEL_SPEEDS: 8 XXX
 SG_ WHEEL_SPEED_FR : 7|16@0+ (0.01,-67.67) [0|250] "kph" XXX
 SG_ WHEEL_SPEED_FL : 23|16@0+ (0.01,-67.67) [0|250] "kph" XXX
 SG_ WHEEL_SPEED_RR : 39|16@0+ (0.01,-67.67) [0|250] "kph" XXX
 SG_ WHEEL_SPEED_RL : 55|16@0+ (0.01,-67.67) [0|250] "kph" XXX

BO_ 180 SPEED: 8 XXX
 SG_ ENCODER : 39|8@0+ (1,0) [0|255] "" XXX
 SG_ CHECKSUM : 63|8@0+ (1,0) [0|255] "" XXX
 SG_ SPEED : 47|16@0+ (0.01,0) [0|250] "kph" XXX

BO_ 466 PCM_CRUISE: 8 XXX
 SG_ GAS_RELEASED : 4|1@0+ (1,0) [0|1] "" XXX
 SG_ STANDSTILL_ON : 12|1@0+ (1,0) [0|1] "" XXX
 SG_ ACCEL_NET : 23|16@0- (0.001,0) [-20|20] "m/s2" XXX
 SG_ CRUISE_STATE : 55|4@0+ (1,0) [0|15] "" XXX
 SG_ CHECKSUM : 63|8@0+ (1,0) [0|255] "" XXX

BO_ 552 ACCELEROMETER: 8 XXX
 SG_ ACCEL_Z : 22|15@0- (1,0) [0|32767] "" XXX
 SG_ ACCEL_X : 6|15@0- (0.001,0) [-20|20] "m/s2" XXX

BO_ 560 BRAKE_MODULE2: 7 XXX
 SG_ BRAKE_PRESSED : 26|1@0+ (1,0) [0|1] "" XXX

BO_ 614 STEERING_IPAS: 8 IPAS
 SG_ STATE : 7|4@0+ (1,0) [0|15] "" XXX
 SG_ ANGLE : 3|12@0- (1.5,0) [-510|510] "deg" XXX
 SG_ SET_ME_X10 : 23|8@0+ (1,0) [0|255] "" XXX
 SG_ SET_ME_X00 : 31|8@0+ (1,0) [0|255] "" XXX
 SG_ DIRECTION_CMD : 38|2@0+ (1,0) [0|3] "" XXX
 SG_ SET_ME_X40 : 47|8@0+ (1,0) [0|255] "" XXX
 SG_ SET_ME_X00 : 55|8@0+ (1,0) [0|255] "" XXX
 SG_ CHECKSUM : 63|8@0+ (1,0) [0|255] "" XXX

BO_ 643 PRE_COLLISION: 8 XXX

BO_ 740 STEERING_LKA: 5 XXX
 SG_ LKA_STATE : 31|8@0+ (1,0) [0|255] "" XXX
 SG_ STEER_REQUEST : 0|1@0+ (1,0) [0|1] "" XXX
 SG_ COUNTER : 6|6@0+ (1,0) [0|63] "" XXX
 SG_ SET_ME_1 : 7|1@0+ (1,0) [0|1] "" XXX
 SG_ STEER_TORQUE_CMD : 15|16@0- (1,0) [0|65535] "" XXX
 SG_ CHECKSUM : 39|8@0+ (1,0) [0|255] "" XXX

BO_ 742 LEAD_INFO: 8 DSU
 SG_ CHECKSUM : 63|8@0+ (1,0) [0|255] "" HCU
 SG_ LEAD_REL_SPEED : 23|12@0- (0.025,0) [-100|100] "m/s" HCU
 SG_ LEAD_LONG_DIST : 7|13@0+ (0.05,0) [0|300] "m" HCU

BO_ 835 ACC_CONTROL: 8 DSU
 SG_ ACCEL_CMD : 7|16@0- (0.001,0) [-20|20] "m/s2" HCU
 SG_ SET_ME_X63 : 23|8@0+ (1,0) [0|255] "" HCU
 SG_ SET_ME_1 : 30|1@0+ (1,0) [0|1] "" HCU
 SG_ RELEASE_STANDSTILL : 31|1@0+ (1,0) [0|1] "" HCU
 SG_ CANCEL_REQ : 24|1@0+ (1,0) [0|1] "" HCU
 SG_ CHECKSUM : 63|8@0+ (1,0) [0|255] "" XXX

BO_ 1556 STEERING_LEVERS: 8 XXX
 SG_ TURN_SIGNALS : 29|2@0+ (1,0) [0|3] "" XXX

BO_ 37 STEER_ANGLE_SENSOR: 8 XXX
 SG_ STEER_ANGLE : 3|12@0- (1.5,0) [-500|500] "deg" XXX
 SG_ STEER_FRACTION : 39|4@0- (0.1,0) [-0.7|0.7] "deg" XXX
 SG_ STEER_RATE : 35|12@0- (1,0) [-2000|2000] "deg/s" XXX

BO_ 467 PCM_CRUISE_2: 8 XXX
 SG_ MAIN_ON : 15|1@0+ (1,0) [0|1] "" XXX
 SG_ LOW_SPEED_LOCKOUT : 14|2@0+ (1,0) [0|3] "kph" XXX
 SG_ SET_SPEED : 23|8@0+ (1,0) [0|255] "kph" XXX
 SG_ CHECKSUM : 63|8@0+ (1,0) [0|255] "" XXX

BO_ 921 PCM_CRUISE_SM: 8 XXX
 SG_ MAIN_ON : 4|1@0+ (1,0) [0|1] "" XXX
 SG_ CRUISE_CONTROL_STATE : 11|4@0+ (1,0) [0|15] "" XXX
 SG_ UI_SET_SPEED : 31|8@0+ (1,0) [0|255] "" XXX

BO_ 951 ESP_CONTROL: 8 ESP
 SG_ TC_DISABLED : 13|1@0+ (1,0) [0|1] "" XXX
 SG_ BRAKE_LIGHTS_ACC : 18|1@0+ (1,0) [0|1] "" XXX

BO_ 1041 ACC_HUD: 8 DSU
 SG_ FCW : 4|1@0+ (1,0) [0|1] "" XXX
 SG_ SET_ME_X20 : 15|8@0+ (1,0) [0|1] "" XXX
 SG_ SET_ME_X10 : 39|8@0+ (1,0) [0|1] "" XXX
 SG_ SET_ME_X80 : 55|8@0+ (1,0) [0|1] "" XXX

BO_ 1042 LKAS_HUD: 8 XXX
 SG_ BARRIERS : 1|2@0+ (1,0) [0|3] "" XXX
 SG_ RIGHT_LINE : 3|2@0+ (1,0) [0|3] "" XXX
 SG_ LEFT_LINE : 5|2@0+ (1,0) [0|3] "" XXX
 SG_ SET_ME_X01 : 7|2@0+ (1,0) [0|3] "" XXX
 SG_ SET_ME_X01_2 : 11|2@0+ (1,0) [0|3] "" XXX
 SG_ LDA_ALERT : 9|2@0+ (1,0) [0|3] "" XXX
 SG_ TWO_BEEPS : 12|1@0+ (1,0) [0|1] "" XXX
 SG_ ADJUSTING_CAMERA : 13|1@0+ (1,0) [0|1] "" XXX
 SG_ LDA_MALFUNCTION : 15|1@0+ (1,0) [0|1] "" XXX
 SG_ REPEATED_BEEPS : 32|1@0+ (1,0) [0|1] "" XXX
 SG_ SET_ME_X0C : 23|8@0+ (1,0) [0|1] "" XXX
 SG_ SET_ME_X2C : 47|8@0+ (1,0) [0|1] "" XXX
 SG_ SET_ME_X38 : 55|8@0+ (1,0) [0|1] "" XXX
 SG_ SET_ME_X02 : 63|8@0+ (1,0) [0|1] "" XXX

BO_ 1553 UI_SEETING: 8 XXX
 SG_ UNITS : 26|2@0+ (1,0) [0|3] "" XXX

BO_ 1568 SEATS_DOORS: 8 XXX
 SG_ SEATBELT_DRIVER_UNLATCHED : 62|1@0+ (1,0) [0|1] "" XXX
 SG_ DOOR_OPEN_FL : 45|1@0+ (1,0) [0|1] "" XXX
 SG_ DOOR_OPEN_RL : 42|1@0+ (1,0) [0|1] "" XXX
 SG_ DOOR_OPEN_RR : 43|1@0+ (1,0) [0|1] "" XXX
 SG_ DOOR_OPEN_FR : 44|1@0+ (1,0) [0|1] "" XXX

BO_ 1570 LIGHT_STALK: 8 SCM
 SG_ AUTO_HIGH_BEAM : 37|1@0+ (1,0) [0|1] "" XXX

CM_ SG_ 36 ACCEL_Y "unit is tbd";
CM_ SG_ 36 YAW_RATE "verify";
CM_ SG_ 36 STEERING_TORQUE "does not seem the steer torque, tbd";
CM_ SG_ 466 ACCEL_NET "net acceleration produced by the system, given ACCEL_CMD, road grade and other factors";
CM_ SG_ 560 BRAKE_PRESSED "another brake pressed?";
CM_ SG_ 951 BRAKE_LIGHTS_ACC "brake lights when ACC commands decel";
CM_ SG_ 608 STEER_TORQUE_DRIVER "driver torque";
CM_ SG_ 608 STEER_OVERRIDE "set when driver torque exceeds a certain value";
CM_ SG_ 614 ANGLE "set to measured angle when ipas control isn't active";
CM_ SG_ 37 STEER_FRACTION "1/15th of the signal STEER_ANGLE, which is 1.5 deg; note that 0x8 is never set";
CM_ SG_ 37 STEER_RATE "factor is tbd";
CM_ SG_ 467 SET_SPEED "43 kph are shown as 28mph, so conversion isnt perfect";
CM_ SG_ 467 LOW_SPEED_LOCKOUT "in low speed lockout, system would always disengage below 28mph";
CM_ SG_ 921 UI_SET_SPEED "set speed shown in UI with user set unit";
CM_ SG_ 1042 SET_ME_1 "unclear what this is, but it's always 1 in drive traces";
CM_ SG_ 1042 REPEATED_BEEPS "recommended for fcw and other important alerts";
VAL_ 466 CRUISE_STATE 8 "active" 7 "standstill" 1 "off" ;
VAL_ 467 LOW_SPEED_LOCKOUT 2 "low speed locked" 1 "ok" ;
VAL_ 614 STATE 3 "enabled" 1 "disabled";
VAL_ 614 DIRECTION_CMD 3 "right" 2 "center" 1 "left";
VAL_ 1553 UNITS 1 "km" 2 "miles";
VAL_ 1556 TURN_SIGNALS 3 "none" 2 "right" 1 "left" ;
VAL_ 1042 LDA_ALERT 3 "hold with continuous beep" 2 "LDA unavailable" 1 "hold" 0 "none";
VAL_ 1042 BARRIERS 3 "both" 2 "right" 1 "left" 0 "none";
VAL_ 1042 RIGHT_LINE 3 "orange" 2 "double" 1 "solid" 0 "none";
VAL_ 1042 LEFT_LINE 3 "orange" 2 "double" 1 "solid" 0 "none";
VAL_ 921 CRUISE_CONTROL_STATE 2 "disabled" 11 "hold" 10 "hold_waiting_user_cmd" 6 "enabled" 5 "faulted";

CM_ "CHFFR_METRIC 37 STEER_ANGLE STEER_ANGLE 0.36 180";

CM_ "toyota_prius_2017_pt.dbc starts here"



BO_ 295 GEAR_PACKET: 8 XXX
 SG_ CAR_MOVEMENT : 39|8@0- (1,0) [0|255] "" XXX
 SG_ COUNTER : 55|8@0+ (1,0) [0|255] "" XXX
 SG_ CHECKSUM : 63|8@0+ (1,0) [0|255] "" XXX
 SG_ GEAR : 47|4@0+ (1,0) [0|15] "" XXX

BO_ 550 BRAKE_MODULE: 8 XXX
 SG_ BRAKE_PRESSURE : 0|9@0+ (1,0) [0|511] "" XXX
 SG_ BRAKE_POSITION : 16|9@0+ (1,0) [0|511] "" XXX
 SG_ BRAKE_PRESSED : 37|1@0+ (1,0) [0|1] "" XXX

BO_ 581 GAS_PEDAL: 8 XXX
 SG_ GAS_PEDAL : 23|8@0+ (0.005,0) [0|1] "" XXX

BO_ 608 STEER_TORQUE_SENSOR: 8 XXX
 SG_ STEER_TORQUE_EPS : 47|16@0- (0.66,0) [-20000|20000] "" XXX
 SG_ STEER_TORQUE_DRIVER : 15|16@0- (1,0) [-32768|32767] "" XXX
 SG_ STEER_OVERRIDE : 0|1@0+ (1,0) [0|1] "" XXX
 SG_ CHECKSUM : 63|8@0+ (1,0) [0|255] "" XXX

BO_ 610 EPS_STATUS: 8 EPS
 SG_ IPAS_STATE : 3|4@0+ (1,0) [0|15] "" XXX
 SG_ LKA_STATE : 31|7@0+ (1,0) [0|127] "" XXX
 SG_ TYPE : 24|1@0+ (1,0) [0|1] "" XXX
 SG_ CHECKSUM : 63|8@0+ (1,0) [0|255] "" XXX

BO_ 1083 AUTOPARK_STATUS: 8 IPAS
 SG_ STATE : 7|4@0+ (1,0) [0|15] "" XXX

CM_ SG_ 550 BRAKE_PRESSURE "seems prop to pedal force";
CM_ SG_ 550 BRAKE_POSITION "seems proportional to pedal displacement, unclear the max value of 0x1c8";
CM_ SG_ 581 GAS_PEDAL "it seems slightly filtered";
CM_ SG_ 610 TYPE "seems 1 on Corolla, 0 on all others";
CM_ SG_ 1083 STATE "when the dashboard button is pressed, the value changes from zero to non-zero";
VAL_ 295 GEAR 0 "P" 1 "R" 2 "N" 3 "D" 4 "B";
VAL_ 610 IPAS_STATE 5 "override" 3 "enabled" 1 "disabled";
VAL_ 610 LKA_STATE 25 "temporary_fault" 9 "temporary_fault2" 5 "active" 1 "standby";