Skip to content

Latest commit

 

History

History
402 lines (291 loc) · 12.8 KB

install.md

File metadata and controls

402 lines (291 loc) · 12.8 KB

buildah logo

Installation Instructions

Installing packaged versions of buildah

sudo pacman -S buildah

Buildah is available in the default Extras repos for CentOS 7 and in the AppStream repo for CentOS 8 and Stream, however the available version often lags the upstream release.

sudo yum -y install buildah

The buildah package is available in the Bookworm, which is the current stable release (Debian 12), as well as Debian Unstable/Sid.

# Debian Stable/Bookworm or Unstable/Sid
sudo apt-get update
sudo apt-get -y install buildah
sudo dnf -y install buildah

Installed by default

Not Available. Must be installed via package layering.

rpm-ostree install buildah

Note: podman build is available by default.

app-containers/buildah

sudo emerge app-containers/buildah
sudo zypper install buildah

transactional-update pkg in buildah

Subscribe, then enable Extras channel and install buildah.

sudo subscription-manager repos --enable=rhel-7-server-extras-rpms
sudo yum -y install buildah

Raspberry Pi OS use the standard Debian's repositories, so it is fully compatible with Debian's arm64 repository. You can simply follow the steps for Debian to install buildah.

sudo yum module enable -y container-tools:1.0
sudo yum module install -y buildah

The buildah package is available in the official repositories for Ubuntu 20.10 and newer.

# Ubuntu 20.10 and newer
sudo apt-get -y update
sudo apt-get -y install buildah

Building from scratch

System Requirements

Kernel Version Requirements

To run Buildah on Red Hat Enterprise Linux or CentOS, version 7.4 or higher is required. On other Linux distributions Buildah requires a kernel version that supports the OverlayFS and/or fuse-overlayfs filesystem -- you'll need to consult your distribution's documentation to determine a minimum version number.

runc Requirement

Buildah uses runc to run commands when buildah run is used, or when buildah build encounters a RUN instruction, so you'll also need to build and install a compatible version of runc for Buildah to call for those cases. If Buildah is installed via a package manager such as yum, dnf or apt-get, runc will be installed as part of that process.

CNI Requirement

When Buildah uses runc to run commands, it defaults to running those commands in the host's network namespace. If the command is being run in a separate user namespace, though, for example when ID mapping is used, then the command will also be run in a separate network namespace.

A newly-created network namespace starts with no network interfaces, so commands which are run in that namespace are effectively disconnected from the network unless additional setup is done. Buildah relies on the CNI library and plugins to set up interfaces and routing for network namespaces.

If Buildah is installed via a package manager such as yum, dnf or apt-get, a package containing CNI plugins may be available (in Fedora, the package is named containernetworking-cni). If not, they will need to be installed, for example using:

  git clone https://github.com/containernetworking/plugins
  ( cd ./plugins; ./build_linux.sh )
  sudo mkdir -p /opt/cni/bin
  sudo install -v ./plugins/bin/* /opt/cni/bin

The CNI library needs to be configured so that it will know which plugins to call to set up namespaces. Usually, this configuration takes the form of one or more configuration files in the /etc/cni/net.d directory. A set of example configuration files is included in the docs/cni-examples directory of this source tree.

Package Installation

Buildah is available on several software repositories and can be installed via a package manager such as yum, dnf or apt-get on a number of Linux distributions.

Installation from GitHub

Prior to installing Buildah, install the following packages on your Linux distro:

  • make
  • golang (Requires version 1.13 or higher.)
  • bats
  • btrfs-progs-devel
  • bzip2
  • git
  • go-md2man
  • gpgme-devel
  • glib2-devel
  • libassuan-devel
  • libseccomp-devel
  • runc (Requires version 1.0 RC4 or higher.)
  • containers-common

Fedora

In Fedora, you can use this command:

 dnf -y install \
    make \
    golang \
    bats \
    btrfs-progs-devel \
    glib2-devel \
    gpgme-devel \
    libassuan-devel \
    libseccomp-devel \
    git \
    bzip2 \
    go-md2man \
    runc \
    containers-common

Then to install Buildah on Fedora follow the steps in this example:

  mkdir ~/buildah
  cd ~/buildah
  export GOPATH=`pwd`
  git clone https://github.com/containers/buildah ./src/github.com/containers/buildah
  cd ./src/github.com/containers/buildah
  make
  sudo make install
  buildah --help

RHEL, CentOS

In RHEL and CentOS, run this command to install the build dependencies:

 yum -y install \
    make \
    golang \
    bats \
    btrfs-progs-devel \
    glib2-devel \
    gpgme-devel \
    libassuan-devel \
    libseccomp-devel \
    git \
    bzip2 \
    go-md2man \
    runc \
    skopeo-containers

The build steps for Buildah on RHEL or CentOS are the same as for Fedora, above.

openSUSE

On openSUSE Tumbleweed, install go via zypper in go, then run this command:

 zypper in make \
    git \
    golang \
    runc \
    bzip2 \
    libgpgme-devel \
    libseccomp-devel \
    libbtrfs-devel \
    go-md2man

The build steps for Buildah on SUSE / openSUSE are the same as for Fedora, above.

Ubuntu/Debian

In Ubuntu 22.10 (Karmic) or Debian 12 (Bookworm) you can use these commands:

  sudo apt-get -y -qq update
  sudo apt-get -y install bats btrfs-progs git go-md2man golang libapparmor-dev libglib2.0-dev libgpgme11-dev libseccomp-dev libselinux1-dev make skopeo

Then to install Buildah follow the steps in this example:

  git clone https://github.com/containers/buildah
  cd buildah
  make runc all SECURITYTAGS="apparmor seccomp"
  sudo make install install.runc
  buildah --help

Vendoring - Dependency Management

This project is using go modules for dependency management. If the CI is complaining about a pull request leaving behind an unclean state, it is very likely right about it. After changing dependencies, make sure to run make vendor-in-container to synchronize the code with the go module and repopulate the ./vendor directory.

Configuration files

The following configuration files are required in order for Buildah to run appropriately. The majority of these files are commonly contained in the containers-common package.

/etc/containers/registries.conf

registries.conf is the configuration file which specifies which container registries should be consulted when completing image names which do not include a registry or domain portion.

Example from the Fedora containers-common package

cat /etc/containers/registries.conf
# This is a system-wide configuration file used to
# keep track of registries for various container backends.
# It adheres to TOML format and does not support recursive
# lists of registries.

# The default location for this configuration file is /etc/containers/registries.conf.

# The only valid categories are: 'registries.search', 'registries.insecure',
# and 'registries.block'.

[registries.search]
registries = ['docker.io', 'registry.fedoraproject.org', 'quay.io', 'registry.access.redhat.com']

# If you need to access insecure registries, add the registry's fully-qualified name.
# An insecure registry is one that does not have a valid SSL certificate or only does HTTP.
[registries.insecure]
registries = []


# If you need to block pull access from a registry, uncomment the section below
# and add the registries fully-qualified name.
#
# Docker only
[registries.block]
registries = []

/usr/share/containers/mounts.conf and optionally /etc/containers/mounts.conf

The mounts.conf files specify volume mount files or directories that are automatically mounted inside containers when executing the buildah run or buildah build commands. Container processes can then use this content. The volume mount content does not get committed to the final image. This file is usually provided by the containers-common package.

Usually these directories are used for passing secrets or credentials required by the package software to access remote package repositories.

For example, a mounts.conf with the line "/usr/share/rhel/secrets:/run/secrets", the content of /usr/share/rhel/secrets directory is mounted on /run/secrets inside the container. This mountpoint allows Red Hat Enterprise Linux subscriptions from the host to be used within the container. It is also possible to omit the destination if it's equal to the source path. For example, specifying /var/lib/secrets will mount the directory into the same container destination path /var/lib/secrets.

Note this is not a volume mount. The content of the volumes is copied into container storage, not bind mounted directly from the host.

Example from the Fedora containers-common package:

cat /usr/share/containers/mounts.conf
/usr/share/rhel/secrets:/run/secrets

/usr/share/containers/seccomp.json

seccomp.json contains the list of seccomp rules to be allowed inside of containers. This file is usually provided by the containers-common package.

The link above takes you to the seccomp.json

/etc/containers/policy.json

Man Page: policy.json.5

Example from the Fedora containers-common package:

cat /etc/containers/policy.json
{
    "default": [
	{
	    "type": "insecureAcceptAnything"
	}
    ],
    "transports":
	{
	    "docker-daemon":
		{
		    "": [{"type":"insecureAcceptAnything"}]
		}
	}
}

Debug with Delve and the like

To make a source debug build without optimizations use BUILDDEBUG=1, like:

make all BUILDDEBUG=1

Vendoring

Buildah uses Go Modules for vendoring purposes. If you need to update or add a vendored package into Buildah, please follow this procedure:

  • Enter into your sandbox src/github.com/containers/buildah and ensure that the GOPATH variable is set to the directory prior as noted above.
  • export GO111MODULE=on
  • go get the needed version:
    • Assuming you want to 'bump' the github.com/containers/storage package to version 1.12.13, use this command: go get github.com/containers/[email protected]
    • Assuming that you want to 'bump' the github.com/containers/storage package to a particular commit, use this command: go get github.com/containers/storage@e307568568533c4afccdf7b56df7b4493e4e9a7b
  • make vendor-in-container
  • make
  • make install
  • Then add any updated or added files with git add then do a git commit and create a PR.

Vendor from your own fork

If you wish to vendor in your personal fork to try changes out (assuming containers/storage in the below example):

  • go mod edit -replace github.com/containers/storage=github.com/{mygithub_username}/storage@YOUR_BRANCH
  • make vendor-in-container

To revert

  • go mod edit -dropreplace github.com/containers/storage
  • make vendor-in-container

To speed up fetching dependencies, you can use a Go Module Proxy by setting GOPROXY=https://proxy.golang.org.