Debian packages install both initd & systemd start scripts?

[StuartIanNaylor]

Surely it should be just one or the other RaspiOS64 Bookworm Lite?

/etc/init.d

#! /bin/sh
### BEGIN INIT INFO
# Provides:          snapserver
# Required-Start:    $remote_fs $syslog $network
# Required-Stop:     $remote_fs $syslog $network
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Snapserver initscript
# Description:       Snapserver - Snapcast server
### END INIT INFO

# Author: Johannes Pohl <[email protected]>

# Do NOT "set -e"

PATH=/sbin:/usr/sbin:/bin:/usr/bin
DESC="Snapcast server"
NAME=snapserver
DAEMON=/usr/bin/$NAME
PIDFILE=/var/run/$NAME/pid
SCRIPTNAME=/etc/init.d/$NAME

# Exit if the package is not installed
[ -x "$DAEMON" ] || exit 0

# Read configuration variable file if it is present
[ -r /etc/default/$NAME ] && . /etc/default/$NAME
SNAPSERVER_OPTS="--daemon $SNAPSERVER_OPTS"

if [ "$START_SNAPSERVER" != "true" ] ; then
  exit 0
fi

# Load the VERBOSE setting and other rcS variables
. /lib/init/vars.sh

# Define LSB log_* functions.
# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
# and status_of_proc is working.
. /lib/lsb/init-functions

#
# Function that starts the daemon/service
#
do_start()
{
	PIDDIR=$(dirname "$PIDFILE")
	if [ ! -d "$PIDDIR" ]; then
			mkdir -m 0755 $PIDDIR
			chown _snapserver:_snapserver $PIDDIR
	fi

	# Return
	#   0 if daemon has been started
	#   1 if daemon was already running
	#   2 if daemon could not be started
	start-stop-daemon --start --quiet --pidfile "$PIDFILE" --chuid "_snapclient:_snapclient" --exec "$DAEMON" --test > /dev/null || return 1
	start-stop-daemon --start --quiet --pidfile "$PIDFILE" --chuid "_snapclient:_snapclient" --exec "$DAEMON" -- $SNAPSERVER_OPTS || return 2
	# Add code here, if necessary, that waits for the process to be ready
	# to handle requests from services started subsequently which depend
	# on this one.  As a last resort, sleep for some time.
}

#
# Function that stops the daemon/service
#
do_stop()
{
	# Return
	#   0 if daemon has been stopped
	#   1 if daemon was already stopped
	#   2 if daemon could not be stopped
	#   other if a failure occurred
	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
	RETVAL="$?"
	[ "$RETVAL" = 2 ] && return 2
	# Wait for children to finish too if this is a daemon that forks
	# and if the daemon is only ever run from this initscript.
	# If the above conditions are not satisfied then add some other code
	# that waits for the process to drop all resources that could be
	# needed by services started subsequently.  A last resort is to
	# sleep for some time.
	start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
	[ "$?" = 2 ] && return 2
	# Many daemons don't delete their pidfiles when they exit.
	rm -f $PIDFILE
	return "$RETVAL"
}

#
# Function that sends a SIGHUP to the daemon/service
#
do_reload() {
	#
	# If the daemon can reload its configuration without
	# restarting (for example, when it is sent a SIGHUP),
	# then implement that here.
	#
	start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
	return 0
}

case "$1" in
  start)
	[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
	do_start
	case "$?" in
		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
	esac
	;;
  stop)
	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
	do_stop
	case "$?" in
		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
	esac
	;;
  status)
	status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
	;;
  #reload|force-reload)
	#
	# If do_reload() is not implemented then leave this commented out
	# and leave 'force-reload' as an alias for 'restart'.
	#
	#log_daemon_msg "Reloading $DESC" "$NAME"
	#do_reload
	#log_end_msg $?
	#;;
  restart|force-reload)
	#
	# If the "reload" option is implemented then remove the
	# 'force-reload' alias
	#
	log_daemon_msg "Restarting $DESC" "$NAME"
	do_stop
	case "$?" in
	  0|1)
		do_start
		case "$?" in
			0) log_end_msg 0 ;;
			1) log_end_msg 1 ;; # Old process is still running
			*) log_end_msg 1 ;; # Failed to start
		esac
		;;
	  *)
		# Failed to stop
		log_end_msg 1
		;;
	esac
	;;
  *)
	#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
	echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
	exit 3
	;;
esac

:

/etc/systemd/system/multi-user.target.wants/snapserver.service

[Unit]
Description=Snapcast server
Documentation=man:snapserver(1)
Wants=network-online.target avahi-daemon.service
After=network-online.target time-sync.target avahi-daemon.service

[Service]
EnvironmentFile=-/etc/default/snapserver
ExecStart=/usr/bin/snapserver --logging.sink=system --server.datadir="${HOME}" $SNAPSERVER_OPTS
User=_snapserver
Group=_snapserver
Restart=on-failure

[Install]
WantedBy=multi-user.target