BLE on current version 14.3.0.4 Error: ... Payload length mismatch

[Mark-Muc]

PROBLEM DESCRIPTION

i just compiled the version 14.3.0.4 (online compiler development)
with this version (BLE enabeled) i got on 2 BLE devices the error:
...
08:08:06.524 M32: 185ED0F18CE3: Payload length mismatch
08:08:08.876 M32: E7764500F442: Payload length mismatch
08:08:09.526 M32: 185ED0F18CE3: Payload length mismatch
08:08:11.906 M32: E7764500F442: Payload length mismatch
...
as you can see: in 2 sec duratation...
if i use the "final" 14.3.0 no error's and also in versions bevor.
This is just to let you know...

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

• Read the Contributing Guide and Policy and the Code of Conduct
• Searched the problem in issues
• Searched the problem in discussions
• Searched the problem in the docs
• Searched the problem in the chat
• Device used (e.g., Sonoff Basic): _____
• Tasmota binary firmware version number used: _____
  • Pre-compiled
  • Self-compiled
• Flashing tools used: _____
• Provide the output of command: Backlog Template; Module; GPIO 255:

  Configuration output here:

• If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3:

  Rules output here:

• Provide the output of this command: Status 0:

  STATUS 0 output here:

• Set weblog to 4 and then, when you experience your issue, provide the output of the Console log:

  Console output here:

TO REPRODUCE

Steps to reproduce the behavior:

EXPECTED BEHAVIOUR

A clear and concise description of what you expected to happen.

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

ADDITIONAL CONTEXT

Add any other context about the problem here.

(Please, remember to close the issue when the problem has been addressed)

[github-actions]

This issue has been automatically marked as stale because it hasn't any activity in last few weeks. It will be closed if no further activity occurs. Thank you for your contributions.

[Mark-Muc]

I will test today with the newest builds to provide more information. The error occurs only on one spec. BLE device and I habe 2 of them ...
Regards
Mark-Muc

[Mark-Muc]

Hello . so I made some test with a fresh compiled version of Tasmota 14.3.0.7 (TasmoCompiler-esp32generic) von Theo Arends
BLE switched ON.
The error (in console) is:

12:25:47.928 M32: E7764500F442: Payload length mismatch
12:26:05.995 M32: E7764500F442: Payload length mismatch
12:26:07.908 M32: 185ED0F18CE3: Payload length mismatch
12:26:09.013 M32: E7764500F442: Payload length mismatch
12:26:16.977 M32: 185ED0F18CE3: Payload length mismatch

it's only be seen on the 2 devices M32: E7764500F442 and M32: 185ED0F18CE3.
Tasmota BLE will dedect them as: MHOC303
I bought them here:

YOUPIN MiaoMiaoCe Thermometer Temperature Humidity Sensor Smart E-Link INK LCD Screen BT4.0 Digital clock Moisture Meter Stock
https://www.aliexpress.com/item/1005001391729019.html?gatewayAdapt=glo2deu

as I mentioned .. in final Tasmota 14.3.0 (TasmoCompiler-esp32generic) von Theo Arends

12:57:29.508 MQT: tele/Rollo-Gal-1-Sued/BLE = {"Time":"2024-11-30T12:57:29","BLEDevices":{"total":18,"001EC0779B33":{"i":0,"n":"D1703174","r":-87},"E7764500F442":{"i":1,"r":-78,"a":"1.OG_Schlafzimmer"},"F877B85FE13D":{"i":2,"r":-74},"C4FEE20264E3":{"i":3,"r":-90},"A4C1382D29C3":{"i":4,"r":-65,"a":"1.OG_Arbeit_2"},"E72E0050A0CC":{"i":5,"r":-76,"a":"1.OG_Bad"},"185ED0F18CE3":{"i":6,"r":-64,"a":"Wohnzimmer_Kamin"},"15031112B437":{"i":7,"r":-87,"a":"2.OG_West"},"A4C138CD7B05":{"i":8,"r":-66},"A4C1389C4D2A":{"i":9,"r":-78,"a":"Thermostat"},"150311116C66":{"i":10,"r":-84,"a":"LYWSD02-1"},"B1FAA4FE92ED":{"i":11,"r":-91},"8ECB7B2F406D":{"i":12,"r":-89},"4C7525F648C6":{"i":13,"r":-89},"48CA432F3126":{"i":14,"r":-88},"C0288D326FA5":{"i":15,"r":-92},"A4C138465A57":{"i":16,"r":-94,"a":"Pavillion_innen"},"C4FEE20209F5":{"i":17,"r":-93}}}

the error won't show up and work like bevor .. only in dev. version of Tasmota 14.3.0.7 (TasmoCompiler-esp32generic) von Theo Arends
it show's up.

Thx for any advice!!
Mark-Muc