Template for Shelly 1PM Gen3 PCB gen3 1pm _v0.1.3

[holgerlembke]

I have bought a Shelly 1PM Gen3 (small red paper box, https://shellyparts.de/products/shelly-1pm-gen3).

I flashed esp32 c3.

But I can not get any template to work.

#23367 does not work, Temperature is far of and no relay/led.

All the "plus" stuff does not work (because it is no plus...).

PCB has "gen3 1pm _v0.1.3" on it.

Any ideas?

Addendum: package bar code is 3800235261798

[sfromis]

The thread you linked has two quite different templates, not clear which one you tried, and if you also enabled it in addition to just having it saved. Better say what exactly you tried, instead of only linking something.

[holgerlembke]

{"NAME":"Shelly 1PM Gen3","GPIO":[0,32,0,4736,224,0,3200,8161,576,1,192,0,0,0,0,0,0,0,0,1,1,1],"FLAG":0,"BASE":1,"CMND":"AdcGpio3 10000,10000,4000"}

does not work. No relay click, no led, temp at random wrong values.

{"NAME":"Shelly Plus 1PM","GPIO":[0,0,0,0,192,2720,0,0,0,0,0,0,0,0,2656,0,0,0,0,2624,0,32,224,0,0,0,0,0,4736,0,0,0,0,0,0,0],"FLAG":0,"BASE":1,"CMND":"AdcParam1 2,10000,10000,3350"}

is for a Plus, mine is no plus. Does not work, does not even show an on/off button.

[holgerlembke]

ok, question: If I supply power via flash port (3v3/gnd), does the relay+led work? Or do they need 230 v supply?

[sfromis]

As a starting point, many types of relays will not work with only 3.3V power.

[holgerlembke]

Thanks for the support.

I have some Sonoffs that work fine (relays and all) with 3V3, so I thought I can extrapolate that to everything. I was wrong and learned something.