Sonoff ZigBee Bridge Pro - Tasmota Script missing

[2000ede]

Hello,

I have successfully flashed the Sonoff ZigBee Bridge Pro with Tasmota:
my Help: https://atlane.de/sonoff-zigbee-bridge-pro-tasmota-flashing-und-homeassistant-integration/

Unfortunately I am missing the script function (in the bin file).

What special defines do I need for the bridge?

With my standard bin he says there is not enough space.
You may have to use the correct bin from the start.

Thanks for the help!

https://templates.blakadder.com/sonoff_ZBBridge-P.html
https://zigbee.blakadder.com/Sonoff_ZBBridge-P.html

[Jason2866]

The build variant does include rules. what is your use case for scripting on this device?

[2000ede]

So far I only had one finished bin file. And I don't know what special ingredients are included:

• define for the gateway
• platform override
• special files

But ok, I will now try it with a normal ESP32 bin file including script. I'll be surprised if that works.

[sfromis]

The point was that you can take the existing build environment for the Sonoff Zigbee Bridge "pro", and then make the mentioned tweaks, instead of starting from "a normal ESP32".

Or you could use the Berry language instead of the scripter, but that's a quite different thing...

[2000ede]

@sfromis

I apologize, maybe it's because of my English.

That's exactly what I'm looking for:
Existing base files/version for the Sonoff Zigbee Bridge “pro”

So far I have only found finished bin files. And I can't take them apart.

Where exactly can I find it?
existing build environment for the Sonoff Zigbee Bridge "pro" ?

[sfromis]

For custom build, see https://tasmota.github.io/docs/Compile-your-build/
And the mentioned build env: https://github.com/arendst/Tasmota/blob/development/platformio_tasmota_env32.ini#L261

[2000ede]

@sfromis
thanks, that was what I was looking for. I wasn't aware that it was simply a module selection in the platform override.

I was able to create and install the bin cleanly.

Unfortunately it doesn't work like it did with the original bin:
https://atlane.de/sonoff-zigbee-bridge-pro-tasmota-flashing-und-homeassistant-integration/

I have saved the profile first:
{"NAME":"TCP ZBBridge Pro","GPIO":[0,0,576,0,480,0,0,0,0,1,1,5792,0,0,0,5472,0,320,5793,5504,0,640,608,32,0,0,0,0,0,1,0,0,0,0,0,0],"FLAG":0,"BASE":1}

After I installed bin, I entered this into Berry and the response was as expected:

import sonoff_zb_pro_flasher as cc
cc.load("SonoffZBPro_coord_20220219.hex")
cc.check()

Then I entered the following into Berry, and it also confirmed this correctly in the log:
cc.flash()

After the restart, he didn't create the zigbee buttons on the Tastmota page and the console didn't show what he expected:

my output:
12:08:25.655 RSL: INFO1 = {"Info1":{"Module":"TCP ZBBridge Pro","Version":"14.2.0.4(efGM9924)","FallbackTopic":"cmnd/DVES_575FCC_fb/","GroupTopic":"cmnd/tasmotas/"}}
12:08:25.669 RSL: INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"tasmota-575FCC-8140","IPAddress":"192.168.178.199","IP6Global":"2a02:8206:a6b5:8300:ca2e:18ff:fe57:5fcc","IP6Local":"fe80::ca2e:18ff:fe57:5fcc%st1"}}
12:08:25.681 RSL: INFO3 = {"Info3":{"RestartReason":"Vbat power on reset","BootCount":6}}
12:08:26.933 QPC: Reset
12:08:29.958 RSL: STATE = {"Time":"2024-10-24T12:08:29","Uptime":"0T00:00:10","UptimeSec":10,"Heap":106,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":38},"Wifi":{"AP":1,"SSId":"Fichtenstr9","BSSId":"5C:49:79:CA:9B:D8","Channel":1,"Mode":"HT20","RSSI":90,"Signal":-55,"LinkCount":1,"Downtime":"0T00:00:05"}}

expected according to the instructions:
20:57:28.054 ZIG: rebooting ZNP device
20:57:28.972 ZbInput discarding byte 00
20:57:28.976 RSL: RESULT = {"ZbState":{"Status":1,"Message":"CCxxxx ZNP booted","RestartReason":"Power-up","MajorRel":2,"MinorRel":7}}
20:57:29.178 RSL: RESULT = {"ZbState":{"Status":50,"MajorRel":2,"MinorRel":7,"MaintRel":1,"Revision":20220219}}
20:57:29.229 RSL: RESULT = {"ZbState":{"Status":2,"Message":"Resetting configuration"}}
20:57:30.859 ZbInput discarding byte 00
20:57:31.429 RSL: RESULT = {"ZbState":{"Status":3,"Message":"Configured, starting coordinator"}}
20:57:37.343 RSL: RESULT = {"ZbState":{"Status":40,"NewState":9,"Message":"Started as coordinator"}}
20:57:37.446 RSL: RESULT = {"ZbState":{"Status":51,"IEEEAddr":"0x00XXXXXXXXXX","ShortAddr":"0x0000","DeviceType":7,"DeviceState":9,"NumAssocDevices":0}}
20:57:37.957 RSL: RESULT = {"ZbState":{"Status":0,"Message":"Started"}}
20:57:37.960 ZIG: Zigbee started
20:57:37.980 ZIG: No Zigbee device information
20:57:37.990 ZIG: No Zigbee device data

With the original bin it worked perfectly. where can I find my error?

[Jason2866]

Never build this variant without rules. It could be it does not work without

[2000ede]

@sfromis @Jason2866
thanks for you support!
Now it works, I took a different guide to parameterizing Tasmota. Instead of the Berry inputs I did this and it works! SUPER

https://templates.blakadder.com/sonoff_ZBBridge-P.html

-->
Auto-configuration
After flashing Tasmota, open the web UI of the device and navigate to Configuration -> Auto-configuration. Select your device from the drop-down and click Apply Configuration.
The device will restart and will be automagically configured.

[sfromis]

Well, when you set up to use the TCP setup for Z2M or ZHA, you'll not get any Zigbee stuff in Tasmota log or web UI, as everything happens on the other end. And it is not really relevant to fuss about using the scripter, when you do not do anything on the Tasmota device outside of providing the ser2net tunnel (where you need a TCPStart command to open for connections).