diff --git a/api/boards.json b/api/boards.json
index 0d17d87a7..5da0e1f18 100644
--- a/api/boards.json
+++ b/api/boards.json
@@ -22,6 +22,27 @@
"url_path": "/board/01space_lcd042_esp32c3/",
"description": "
The ESP32-C3-0.42LCD is an ESP32 C3 / RP2040 Raspberry Pi Pico Development board with 0.42 inch LCD risc-v WiFi Bluetooth.
ESP32-C3 is a low-cost microcontroller from Espressif that supports 2.4 GHz Wi-Fi and Bluetooth® Low Energy ( Bluetooth 5 (LE)).Use RISC V as the core. There’s a minimum number of pins on this chip, it’s specifically designed to be low cost and for simpler projects than ESP32-Sx or ESP32 classics with their large number of GPIO. Think of it more as an intended replacement to the ESP8266 than to the ESP32! It has built-inUSB-to-Serial, but not native USB - it cannot act as a keyboard or disk drive. The chip used here has 4MB of Flash memory, 400 KB of SRAM.
The ESP32-C3 integrates a rich set of peripherals, ranging from UART, I2C, I2S, remote control peripheral, LED PWM controller, general DMA controller, TWAI controller, USB Serial/JTAG controller, temperature sensor, and ADC. It also includes SPI, Dual SPI, and Quad SPI interfaces. There is no DAC or native capacitive touch.
With its state-of-the-art power and RF performance, this SoC is an ideal choice for a wide variety of application scenarios relating to the Internet of Things (IoT), wearable electronics, and smart homes.
Specifications
Based ESP32-C3FH4 WIFI & Bluetooth LE RISC-V Single-Core CPU Type-C USB 4MB Flash 11x IO 1x1.0-4P connector(GND,3V3,SDA(GPIO5),SCL(GPIO6)) 1x RGB(GPIO2) 1xLED(3.3V Power Supply) 1xReset button(CHIP_EN,great for restarting your program or entering the ROM bootloader) 1xBoot button(GPIO9,entering the ROM bootloader or for user input) 3.3V Regulator with 500mA peak output Ceramic Antenna Purchase "
},
+ {
+ "board_id": "0xcb_gemini",
+ "title": "0xCB Gemini Download",
+ "name": "Gemini",
+ "board_url": [
+ "https://github.com/0xCB-dev/0xCB-Gemini"
+ ],
+ "board_image": "0xcb_gemini.jpg",
+ "date_added": "2024-11-11",
+ "family": "raspberrypi",
+ "bootloader_id": "",
+ "tags": [
+ ],
+ "features": [
+ "USB-C",
+ "Breadboard-Friendly",
+ "Castellated Pads"
+ ],
+ "url_path": "/board/0xcb_gemini/",
+ "description": "The 0xCB Gemini is our Waveshare RP2040-Zero compatible microcontroller. It includes all the features of it’s bigger brother, the 0xCB Helios , in a much smaller form factor.
Technical details Powerful RP2040 32-bit Cortex M0+ dual core running at 133 MHz and 264kB SRAM. 16MB/128Mb QSPI FLASH chip for storing files and code 3.3V 500mA LDO, PTC fuse and ESD protection chip 4 pins configurable as analog inputs GPIO16 is level shifted to 5v to drive the onboard aRGB LED (DIO is connected to GP16) USB VBUS detection on GPIO19 for split keyboard side detection UF2 bootloader for drag & drop programming via your file manager easy to use Single button boot and reset circuit push to reset and hold >500ms to enter bootloader 4 pads for use with an external USB socket/daughterboard USB-C connector lets you access built-in ROM USB bootloader and serial port debugging Purchase "
+ },
{
"board_id": "0xcb_helios",
"title": "0xCB Helios Download",
diff --git a/assets/images/boards/large/0xcb_gemini.jpg b/assets/images/boards/large/0xcb_gemini.jpg
new file mode 100644
index 000000000..42838f667
Binary files /dev/null and b/assets/images/boards/large/0xcb_gemini.jpg differ
diff --git a/assets/images/boards/large/0xcb_helios.jpg b/assets/images/boards/large/0xcb_helios.jpg
index d6d4cd5f6..ae40eb183 100644
Binary files a/assets/images/boards/large/0xcb_helios.jpg and b/assets/images/boards/large/0xcb_helios.jpg differ
diff --git a/assets/images/boards/small/0xcb_gemini.jpg b/assets/images/boards/small/0xcb_gemini.jpg
new file mode 100644
index 000000000..d4a9a84a6
Binary files /dev/null and b/assets/images/boards/small/0xcb_gemini.jpg differ
diff --git a/assets/images/boards/small/0xcb_helios.jpg b/assets/images/boards/small/0xcb_helios.jpg
index 49718ba52..f898b9b17 100644
Binary files a/assets/images/boards/small/0xcb_helios.jpg and b/assets/images/boards/small/0xcb_helios.jpg differ
diff --git a/blinka.html b/blinka.html
index 2e81b7329..5cddb4ced 100644
--- a/blinka.html
+++ b/blinka.html
@@ -2187,6 +2187,10 @@ Blinka
+
+
+
+
@@ -3783,6 +3787,10 @@ Feather RP2040
+
+
+
+
@@ -5387,6 +5395,10 @@ Feather RP2040 CAN Bus
+
+
+
+
@@ -6989,6 +7001,10 @@ Feather RP2040 RFM9x
+
+
+
+
@@ -8597,6 +8613,10 @@ Feather RP2040 RFM69
+
+
+
+
@@ -10219,6 +10239,10 @@ Feather RP2040 ThinkInk
+
+
+
+
@@ -11843,6 +11867,10 @@ ItsyBitsy RP2040
+
+
+
+
@@ -13471,6 +13499,10 @@ Adafruit KB2040
+
+
+
+
@@ -15121,6 +15153,10 @@ MacroPad RP2040
+
+
+
+
@@ -16783,6 +16819,10 @@ Trinkey QT2040
+
+
+
+
@@ -18493,6 +18533,10 @@ QT Py RP2040
+
+
+
+
@@ -20205,6 +20249,10 @@ SmartEdge Industrial IOT Gateway
+
+
+
+
@@ -21921,6 +21969,10 @@ Banana Pi BPI-M2+
+
+
+
+
@@ -23635,6 +23687,10 @@ Banana Pi BPI-M2 Zero
+
+
+
+
@@ -25365,6 +25421,10 @@ Banana Pi BPI-M5
+
+
+
+
@@ -27097,6 +27157,10 @@ BeagleBone
+
+
+
+
@@ -28831,6 +28895,10 @@ BeagleBone AI
+
+
+
+
@@ -30567,6 +30635,10 @@ BeagleBone Black
+
+
+
+
@@ -32305,6 +32377,10 @@ BeagleBone Black Industrial
+
+
+
+
@@ -34045,6 +34121,10 @@ BeagleBone Black Wireless
+
+
+
+
@@ -35787,6 +35867,10 @@ BeagleBone Blue
+
+
+
+
@@ -37531,6 +37615,10 @@ BeagleBone Green Gateway
+
+
+
+
@@ -39277,6 +39365,10 @@ BeagleBone Green Wireless
+
+
+
+
@@ -41027,6 +41119,10 @@ BeagleV Starlight Beta Prototype
+
+
+
+
@@ -42843,6 +42939,10 @@ Nova
+
+
+
+
@@ -44661,6 +44761,10 @@ Clara AGX Xavier
+
+
+
+
@@ -46533,6 +46637,10 @@ ClockworkPi
+
+
+
+
@@ -48409,6 +48517,10 @@ Piunora
+
+
+
+
@@ -50407,6 +50519,10 @@ Dragonboard 410c
+
+
+
+
@@ -52413,6 +52529,10 @@ FT232H
+
+
+
+
@@ -54421,6 +54541,10 @@ Giant Board
+
+
+
+
@@ -56431,6 +56555,10 @@ Google Coral Dev Board
+
+
+
+
@@ -58453,6 +58581,10 @@ Google Coral Dev Board Mini
+
+
+
+
@@ -60487,6 +60619,10 @@ GreatFET One
+
+
+
+
@@ -62551,6 +62687,10 @@ Hifive Unleashed
+
+
+
+
@@ -64617,6 +64757,10 @@ Jetson AGX Orin
+
+
+
+
@@ -66685,6 +66829,10 @@ Jetson Nano Dev Kit
+
+
+
+
@@ -68755,6 +68903,10 @@ Jetson Orin Nano Dev Kit
+
+
+
+
@@ -70827,6 +70979,10 @@ Jetson Orin NX AI Dev Kit
+
+
+
+
@@ -72901,6 +73057,10 @@ Jetson TX1
+
+
+
+
@@ -74977,6 +75137,10 @@ Jetson TX2 Dev Kit
+
+
+
+
@@ -77055,6 +77219,10 @@ Jetson TX2 Dev Kit
+
+
+
+
@@ -79135,6 +79303,10 @@ Jetson AGX Xavier Dev Kit
+
+
+
+
@@ -81227,6 +81399,10 @@ Jetson Xavier NX
+
+
+
+
@@ -83323,6 +83499,10 @@ Khadas VIM3
+
+
+
+
@@ -85421,6 +85601,10 @@ Banana Pro
+
+
+
+
@@ -87521,6 +87705,10 @@ AML-S905X-CC (Le Potato)
+
+
+
+
@@ -89623,6 +89811,10 @@ ROC-RK3328-CC (Renegade)
+
+
+
+
@@ -91727,6 +91919,10 @@ LicheePi 4A
+
+
+
+
@@ -93879,6 +94075,10 @@ Lichee RV Dock D1
+
+
+
+
@@ -96033,6 +96233,10 @@ LubanCat-4
+
+
+
+
@@ -98189,6 +98393,10 @@ LubanCat-5
+
+
+
+
@@ -100347,6 +100555,10 @@ LubanCat1
+
+
+
+
@@ -102507,6 +102719,10 @@ LubanCat1N
+
+
+
+
@@ -104669,6 +104885,10 @@ LubanCat2
+
+
+
+
@@ -106833,6 +107053,10 @@ LubanCat2N
+
+
+
+
@@ -108999,6 +109223,10 @@ LubanCat I.MX6ULL
+
+
+
+
@@ -111167,6 +111395,10 @@ LubanCat Zero N
+
+
+
+
@@ -113337,6 +113569,10 @@ LubanCat Zero W
+
+
+
+
@@ -115509,6 +115745,10 @@ LuckyFox Pico
+
+
+
+
@@ -117683,6 +117923,10 @@ LuckyFox Pico Pro/Max
+
+
+
+
@@ -119859,6 +120103,10 @@ LuckyFox Pico Mini
+
+
+
+
@@ -122095,6 +122343,10 @@ LuckyFox Pico Plus
+
+
+
+
@@ -124355,6 +124607,10 @@ MCP2221
+
+
+
+
@@ -126637,6 +126893,10 @@ MilkV Duo
+
+
+
+
@@ -128923,6 +129183,10 @@ NanoPi Duo2
+
+
+
+
@@ -131207,6 +131471,10 @@ NanoPi NEO Air
+
+
+
+
@@ -133517,6 +133785,10 @@ NanoPi NEO
+
+
+
+
@@ -135829,6 +136101,10 @@ OSD32MP1-RED
+
+
+
+
@@ -138143,6 +138419,10 @@ OSD32MP1-RED
+
+
+
+
@@ -140459,6 +140739,10 @@ ODROID C2
+
+
+
+
@@ -142777,6 +143061,10 @@ ODROID C4
+
+
+
+
@@ -145097,6 +145385,10 @@ ODROID M1
+
+
+
+
@@ -147419,6 +147711,10 @@ ODROID M1S
+
+
+
+
@@ -149743,6 +150039,10 @@ ODROID N2
+
+
+
+
@@ -152069,6 +152369,10 @@ ODROID XU4
+
+
+
+
@@ -154405,6 +154709,10 @@ ODROID XU4Q
+
+
+
+
@@ -156745,6 +157053,10 @@ ODYSSEY - X86J4105
+
+
+
+
@@ -159087,6 +159399,10 @@ A20-OLinuXino-LIME2
+
+
+
+
@@ -161435,6 +161751,10 @@ Onion Omega2+
+
+
+
+
@@ -163785,6 +164105,10 @@ Orange Pi 2
+
+
+
+
@@ -166137,6 +166461,10 @@ Orange Pi 3
+
+
+
+
@@ -168491,6 +168819,10 @@ Orange Pi 4
+
+
+
+
@@ -170847,6 +171179,10 @@ Orange Pi 4 LTS
+
+
+
+
@@ -173205,6 +173541,10 @@ Orange Pi 5
+
+
+
+
@@ -175565,6 +175905,10 @@ Orange Pi 5 Plus
+
+
+
+
@@ -177927,6 +178271,10 @@ Orange Pi Lite
+
+
+
+
@@ -180291,6 +180639,10 @@ Orange Pi One
+
+
+
+
@@ -182657,6 +183009,10 @@ Orange Pi PC
+
+
+
+
@@ -185025,6 +185381,10 @@ Orange Pi PC2
+
+
+
+
@@ -187395,6 +187755,10 @@ Orange Pi PC Plus
+
+
+
+
@@ -189767,6 +190131,10 @@ Orange Pi Plus 2E
+
+
+
+
@@ -192141,6 +192509,10 @@ Orange Pi R1
+
+
+
+
@@ -194515,6 +194887,10 @@ Orange Pi Zero
+
+
+
+
@@ -196893,6 +197269,10 @@ Orange Pi Zero2
+
+
+
+
@@ -199273,6 +199653,10 @@ Orange Pi Zero Plus
+
+
+
+
@@ -201675,6 +202059,10 @@ Orange Pi Zero Plus2 (H5 Version)
+
+
+
+
@@ -204079,6 +204467,10 @@ pcDuino2
+
+
+
+
@@ -206545,6 +206937,10 @@ pcDuino3
+
+
+
+
@@ -209013,6 +209409,10 @@ Pine A64+
+
+
+
+
@@ -211487,6 +211887,10 @@ PINE H64
+
+
+
+
@@ -213969,6 +214373,10 @@ PocketBeagle
+
+
+
+
@@ -216473,6 +216881,10 @@ Pyboard
+
+
+
+
@@ -218979,6 +219391,10 @@ Quartz64 Model A
+
+
+
+
@@ -221487,6 +221903,10 @@ Radxa CM3 IO Board
+
+
+
+
@@ -223995,6 +224415,10 @@ Rock 3A
+
+
+
+
@@ -226507,6 +226931,10 @@ Rock 3C
+
+
+
+
@@ -229021,6 +229449,10 @@ Rock 4 SE
+
+
+
+
@@ -231537,6 +231969,10 @@ Rock 5B
+
+
+
+
@@ -234055,6 +234491,10 @@ Rock 5C
+
+
+
+
@@ -236575,6 +237015,10 @@ Radxa Zero
+
+
+
+
@@ -239097,6 +239541,10 @@ Radxa Zero 3E
+
+
+
+
@@ -241621,6 +242069,10 @@ Radxa Zero 3W
+
+
+
+
@@ -244147,6 +244599,10 @@ Pi 1 Model A
+
+
+
+
@@ -246675,6 +247131,10 @@ Pi 1 Model A+
+
+
+
+
@@ -249205,6 +249665,10 @@ Pi 1 Model B
+
+
+
+
@@ -251737,6 +252201,10 @@ Pi 1 Model B+
+
+
+
+
@@ -254271,6 +254739,10 @@ Pi 2 Model B
+
+
+
+
@@ -256807,6 +257279,10 @@ Pi 3 Model A+
+
+
+
+
@@ -259345,6 +259821,10 @@ Pi 3 Model B
+
+
+
+
@@ -261885,6 +262365,10 @@ Pi 3 Model B+
+
+
+
+
@@ -264427,6 +264911,10 @@ Pi 400 Desktop
+
+
+
+
@@ -266971,6 +267459,10 @@ Pi 4 Model B
+
+
+
+
@@ -269517,6 +270009,10 @@ Pi 5
+
+
+
+
@@ -272065,6 +272561,10 @@ Compute Module 1
+
+
+
+
@@ -274615,6 +275115,10 @@ Compute Module 3
+
+
+
+
@@ -277167,6 +277671,10 @@ Compute Module 3 Lite
+
+
+
+
@@ -279721,6 +280229,10 @@ Compute Module 3+
+
+
+
+
@@ -282293,6 +282805,10 @@ Compute Module 3+ Lite
+
+
+
+
@@ -284851,6 +285367,10 @@ Compute Module 4 IO Board
+
+
+
+
@@ -287415,6 +287935,10 @@ Pico
+
+
+
+
@@ -289981,6 +290505,10 @@ Zero
+
+
+
+
@@ -292551,6 +293079,10 @@ Zero 2 W
+
+
+
+
@@ -295133,6 +295665,10 @@ Zero W
+
+
+
+
@@ -297717,6 +298253,10 @@ Rock Pi 4C
+
+
+
+
@@ -300303,6 +300843,10 @@ ROCK Pi 4C+
+
+
+
+
@@ -302891,6 +303435,10 @@ Rock Pi E
+
+
+
+
@@ -305509,6 +306057,10 @@ Rock Pi S
+
+
+
+
@@ -308127,6 +308679,10 @@ SIMATIC IOT2050
+
+
+
+
@@ -310777,6 +311333,10 @@ SIMATIC IOT2050 Advance
+
+
+
+
@@ -313481,6 +314041,10 @@ SOPINE A64
+
+
+
+
@@ -316197,6 +316761,10 @@ Starfive VisionFive2
+
+
+
+
@@ -318957,6 +319525,10 @@ STM32MP1 Discovery Kit 2
+
+
+
+
@@ -321765,6 +322337,10 @@ X86 II ULTRA
+
+
+
+
@@ -324579,6 +325155,10 @@ Vivid Unit
+
+
+
+
@@ -327413,6 +327993,10 @@ Walnut Pi 1B
+
+
+
+
diff --git a/board/0xcb_gemini/index.html b/board/0xcb_gemini/index.html
new file mode 100644
index 000000000..46c6a7359
--- /dev/null
+++ b/board/0xcb_gemini/index.html
@@ -0,0 +1,229 @@
+
+
+
+
+
+
+
+
+
+
+0xCB Gemini Download
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
Gemini
+
by 0xCB
+
+
+
+
+
+
+
+
The 0xCB Gemini is our Waveshare RP2040-Zero compatible microcontroller. It includes all the features of it’s bigger brother, the 0xCB Helios , in a much smaller form factor.
+
+
Technical details
+
+
+ Powerful RP2040 32-bit Cortex M0+ dual core running at 133 MHz and 264kB SRAM.
+ 16MB/128Mb QSPI FLASH chip for storing files and code
+ 3.3V 500mA LDO, PTC fuse and ESD protection chip
+ 4 pins configurable as analog inputs
+ GPIO16 is level shifted to 5v to drive the onboard aRGB LED (DIO is connected to GP16)
+ USB VBUS detection on GPIO19 for split keyboard side detection
+ UF2 bootloader for drag & drop programming via your file manager
+ easy to use Single button boot and reset circuit push to reset and hold >500ms to enter bootloader
+ 4 pads for use with an external USB socket/daughterboard
+ USB-C connector lets you access built-in ROM USB bootloader and serial port debugging
+
+
+
Purchase
+
+
+
+
+
Contribute
+
Have some info to add for this board? Edit the source for this page here .
+
+
+
+
+
+
+
+
+
+
Absolute Newest
+
+ Every time we commit new code to CircuitPython we automatically
+ build binaries for each board and language. The binaries are
+ stored on Amazon S3, organized by board, and then by
+ language. These releases are even newer than the development release listed above.
+ Try them if you want the absolute latest and are
+ feeling daring or want to see if a problem has been fixed.
+
+
+
+
+
Previous Versions of CircuitPython
+
+ All previous releases of CircuitPython are available for download from Amazon S3 through the button below.
+ For very old releases, look in the OLD/ folder for each board.
+ Release notes for each release are available at GitHub button below.
+
+
+ Older releases are useful for testing if you something appears to be broken in a newer release
+ but used to work,
+ or if you have older code that depends on features only available in an older release.
+ Otherwise we recommend using the latest stable release.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/contributing.html b/contributing.html
index ea2dbdfda..5f4454307 100644
--- a/contributing.html
+++ b/contributing.html
@@ -161,7 +161,7 @@ Contributing
Have an idea for a new driver or library?
File an issue on the CircuitPython repo!
- Current Status for Mon, Nov 18, 2024
+ Current Status for Tue, Nov 19, 2024
@@ -191,15 +191,15 @@ Open Pull Requests
@@ -210,11 +210,11 @@ Open Pull Requests
@@ -225,7 +225,7 @@ Open Pull Requests
@@ -236,7 +236,7 @@ Open Pull Requests
@@ -247,7 +247,7 @@ Open Pull Requests
@@ -258,18 +258,7 @@ Open Pull Requests
-
-
-
- Adafruit_CircuitPython_Display_Shapes
-
@@ -280,7 +269,7 @@ Open Pull Requests
@@ -291,7 +280,7 @@ Open Pull Requests
@@ -302,7 +291,7 @@ Open Pull Requests
@@ -313,7 +302,7 @@ Open Pull Requests
@@ -324,7 +313,7 @@ Open Pull Requests
@@ -335,7 +324,7 @@ Open Pull Requests
@@ -346,7 +335,7 @@ Open Pull Requests
@@ -357,7 +346,7 @@ Open Pull Requests
@@ -368,7 +357,7 @@ Open Pull Requests
@@ -379,7 +368,7 @@ Open Pull Requests
@@ -390,11 +379,11 @@ Open Pull Requests
@@ -405,7 +394,7 @@ Open Pull Requests
@@ -416,7 +405,7 @@ Open Pull Requests
@@ -427,7 +416,7 @@ Open Pull Requests
@@ -438,7 +427,7 @@ Open Pull Requests
@@ -449,7 +438,7 @@ Open Pull Requests
@@ -460,7 +449,7 @@ Open Pull Requests
@@ -471,15 +460,15 @@ Open Pull Requests
@@ -490,7 +479,7 @@ Open Pull Requests
@@ -501,7 +490,7 @@ Open Pull Requests
@@ -512,7 +501,7 @@ Open Pull Requests
@@ -523,7 +512,7 @@ Open Pull Requests
@@ -534,7 +523,7 @@ Open Pull Requests
@@ -545,11 +534,11 @@ Open Pull Requests
@@ -560,7 +549,7 @@ Open Pull Requests
@@ -571,7 +560,7 @@ Open Pull Requests
@@ -582,7 +571,7 @@ Open Pull Requests
@@ -593,7 +582,7 @@ Open Pull Requests
@@ -604,7 +593,7 @@ Open Pull Requests
@@ -615,7 +604,7 @@ Open Pull Requests
@@ -626,7 +615,7 @@ Open Pull Requests
@@ -637,7 +626,7 @@ Open Pull Requests
@@ -648,7 +637,7 @@ Open Pull Requests
diff --git a/contributing/library-infrastructure-issues.html b/contributing/library-infrastructure-issues.html
index d57f1bcf6..c0003e5c8 100644
--- a/contributing/library-infrastructure-issues.html
+++ b/contributing/library-infrastructure-issues.html
@@ -161,7 +161,7 @@ Contributing
Have an idea for a new driver or library?
File an issue on the CircuitPython repo!
- Current Status for Mon, Nov 18, 2024
+ Current Status for Tue, Nov 19, 2024
@@ -204,9 +204,7 @@ Library Infrastructure Issues
A programmatic error occurred
-
-
- Library has new commits since last release within the last month
-
@@ -398,6 +389,8 @@ Library Infrastructure Issues
https://github.com/adafruit/Adafruit_CircuitPython_ICN6211
+ https://github.com/adafruit/Adafruit_CircuitPython_USB_Host_MIDI
+
@@ -572,6 +565,10 @@ Library Infrastructure Issues
https://github.com/adafruit/Adafruit_CircuitPython_SSD1608
+ https://github.com/adafruit/Adafruit_CircuitPython_ST7565
+
+ https://github.com/adafruit/Adafruit_CircuitPython_TCA9548A
+
https://github.com/adafruit/Adafruit_CircuitPython_Touchscreen
https://github.com/adafruit/Adafruit_CircuitPython_WS2801
@@ -584,8 +581,6 @@ Library Infrastructure Issues
https://github.com/adafruit/Adafruit_CircuitPython_BLE_Apple_Notification_Center
- https://github.com/adafruit/Adafruit_CircuitPython_BLE_BerryMed_Pulse_Oximeter
-
https://github.com/adafruit/Adafruit_CircuitPython_BLE_Cycling_Speed_and_Cadence
https://github.com/adafruit/Adafruit_CircuitPython_BLE_Heart_Rate
@@ -1082,8 +1077,6 @@ Library Infrastructure Issues
https://github.com/adafruit/Adafruit_CircuitPython_ImageLoad
- https://github.com/adafruit/Adafruit_CircuitPython_BME680
-
https://github.com/adafruit/Adafruit_CircuitPython_BLE
https://github.com/adafruit/Adafruit_CircuitPython_CLUE
@@ -1098,11 +1091,13 @@ Library Infrastructure Issues
https://github.com/adafruit/Adafruit_CircuitPython_Display_Button
+ https://github.com/adafruit/Adafruit_CircuitPython_DisplayIO_Layout
+
https://github.com/adafruit/Adafruit_CircuitPython_Display_Shapes
https://github.com/adafruit/Adafruit_CircuitPython_Display_Text
- https://github.com/adafruit/Adafruit_CircuitPython_DisplayIO_Layout
+ https://github.com/adafruit/Adafruit_CircuitPython_BME680
@@ -1269,6 +1264,10 @@ Library Infrastructure Issues
https://github.com/adafruit/Adafruit_CircuitPython_SSD1608
+ https://github.com/adafruit/Adafruit_CircuitPython_ST7565
+
+ https://github.com/adafruit/Adafruit_CircuitPython_TCA9548A
+
https://github.com/adafruit/Adafruit_CircuitPython_Touchscreen
https://github.com/adafruit/Adafruit_CircuitPython_WS2801
@@ -1281,8 +1280,6 @@ Library Infrastructure Issues
https://github.com/adafruit/Adafruit_CircuitPython_BLE_Apple_Notification_Center
- https://github.com/adafruit/Adafruit_CircuitPython_BLE_BerryMed_Pulse_Oximeter
-
https://github.com/adafruit/Adafruit_CircuitPython_BLE_Cycling_Speed_and_Cadence
https://github.com/adafruit/Adafruit_CircuitPython_BLE_Heart_Rate
@@ -1779,12 +1776,12 @@ Library Infrastructure Issues
https://github.com/adafruit/Adafruit_CircuitPython_Display_Button
+ https://github.com/adafruit/Adafruit_CircuitPython_DisplayIO_Layout
+
https://github.com/adafruit/Adafruit_CircuitPython_Display_Shapes
https://github.com/adafruit/Adafruit_CircuitPython_Display_Text
- https://github.com/adafruit/Adafruit_CircuitPython_DisplayIO_Layout
-
@@ -2030,8 +2027,6 @@ Library Infrastructure Issues
https://github.com/adafruit/Adafruit_CircuitPython_PIO_UART
- https://github.com/adafruit/Adafruit_CircuitPython_USB_Host_MIDI
-
https://github.com/adafruit/Adafruit_CircuitPython_VCNL4200
https://github.com/adafruit/Adafruit_CircuitPython_TemplateEngine
@@ -2109,6 +2104,15 @@ Library Infrastructure Issues
+
+ Unable to pull repo details
+
+
+
Wiki should be disabled
diff --git a/contributing/open-issues.html b/contributing/open-issues.html
index 35590db18..67bf56392 100644
--- a/contributing/open-issues.html
+++ b/contributing/open-issues.html
@@ -161,7 +161,7 @@ Contributing
Have an idea for a new driver or library?
File an issue on the CircuitPython repo!
- Current Status for Mon, Nov 18, 2024
+ Current Status for Tue, Nov 19, 2024
@@ -226,7 +226,7 @@ Open Issues
- Only write if byte is different (Open 1057 days)
+ Only write if byte is different (Open 1058 days)
@@ -240,7 +240,7 @@ Open Issues
- CircuitPython_AD569x NOT working on Adafruit Metro ESP32-S3 (Adafruit Product ID: 5500) (Open 293 days)
+ CircuitPython_AD569x NOT working on Adafruit Metro ESP32-S3 (Adafruit Product ID: 5500) (Open 294 days)
@@ -254,14 +254,14 @@ Open Issues
- Add support/example for CPY 8, and non-secondary ESP chips (Open 566 days)
+ Add support/example for CPY 8, and non-secondary ESP chips (Open 567 days)
- use of . and dot and groups (using circuitpython) (Open 1238 days)
+ use of . and dot and groups (using circuitpython) (Open 1239 days)
@@ -275,7 +275,7 @@ Open Issues
- adafruit_ads1x15.Analogin - correct ADC scaling to 16-bit range to match analogio.AnalogIn #43 (Open 505 days)
+ adafruit_ads1x15.Analogin - correct ADC scaling to 16-bit range to match analogio.AnalogIn #43 (Open 506 days)
@@ -293,7 +293,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -317,7 +317,7 @@ Open Issues
- Switch events to properties (Open 65 days)
+ Switch events to properties (Open 66 days)
@@ -328,7 +328,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -356,7 +356,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -384,7 +384,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -412,7 +412,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -429,7 +429,7 @@ Open Issues
- Accuracy on FunHouse? (or temp compensation of RH via dew point?) (Open 1270 days)
+ Accuracy on FunHouse? (or temp compensation of RH via dew point?) (Open 1271 days)
@@ -443,7 +443,7 @@ Open Issues
- Allow sharing CS pin with other pins; give up pins for wifi (Open 1255 days)
+ Allow sharing CS pin with other pins; give up pins for wifi (Open 1256 days)
enhancement
@@ -463,7 +463,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -480,7 +480,7 @@ Open Issues
- strange discontinuity between 31 and 33 degrees C? (Open 1627 days)
+ strange discontinuity between 31 and 33 degrees C? (Open 1628 days)
bug
@@ -496,7 +496,7 @@ Open Issues
- Install error with pipenv on RPi4 (Open 1022 days)
+ Install error with pipenv on RPi4 (Open 1023 days)
@@ -514,7 +514,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -542,7 +542,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -570,7 +570,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -594,70 +594,70 @@ Open Issues
- Could `TaskQueue` be implemented without `Task` being in C? (Open 367 days)
+ Could `TaskQueue` be implemented without `Task` being in C? (Open 368 days)
- Support Task methods `result()`, `exception()`, and `cancelled()` (Open 375 days)
+ Support Task methods `result()`, `exception()`, and `cancelled()` (Open 376 days)
- Streams (Open 426 days)
+ Streams (Open 427 days)
- Exception within a task can cause other tasks to run before the exceptioned-task completes (Open 701 days)
+ Exception within a task can cause other tasks to run before the exceptioned-task completes (Open 702 days)
- "no module named 'usocket'" on Raspberry Pico W (Open 729 days)
+ "no module named 'usocket'" on Raspberry Pico W (Open 730 days)
- add TaskGroup here or in another library (Open 1089 days)
+ add TaskGroup here or in another library (Open 1090 days)
- Add Queue and other asyncio features from MicroPython unofficial version of asyncio (Open 1089 days)
+ Add Queue and other asyncio features from MicroPython unofficial version of asyncio (Open 1090 days)
- CancelledError not showing up as a backtrace (Open 1092 days)
+ CancelledError not showing up as a backtrace (Open 1093 days)
- Use CircuitPython socket support (Open 1095 days)
+ Use CircuitPython socket support (Open 1096 days)
- Remove or move non-CPython asyncio functionality (Open 1096 days)
+ Remove or move non-CPython asyncio functionality (Open 1097 days)
@@ -675,7 +675,7 @@ Open Issues
good-first-issue
- hacktoberfest">Incorrect check in adafruit_atecc_asn1.py:issuer_or_subject_length (Open 573 days)
+ hacktoberfest">Incorrect check in adafruit_atecc_asn1.py:issuer_or_subject_length (Open 574 days)
bug
@@ -692,35 +692,35 @@ Open Issues
- atecc_csr.py fails (Open 857 days)
+ atecc_csr.py fails (Open 858 days)
- sample atecc_csr.py fails (Open 1242 days)
+ sample atecc_csr.py fails (Open 1243 days)
- nonce function does not generate a nonce (Open 1326 days)
+ nonce function does not generate a nonce (Open 1327 days)
- random function is not generating random numbers (Open 1326 days)
+ random function is not generating random numbers (Open 1327 days)
- Implement atcab_write_pubkey and atcab_priv_write commands (Open 1845 days)
+ Implement atcab_write_pubkey and atcab_priv_write commands (Open 1846 days)
enhancement
@@ -736,14 +736,14 @@ Open Issues
- Hex-files spanning more than 64K not supported (Open 1111 days)
+ Hex-files spanning more than 64K not supported (Open 1112 days)
- Flash-write repetitively missing bytes on 0x100-boundary (Open 1112 days)
+ Flash-write repetitively missing bytes on 0x100-boundary (Open 1113 days)
@@ -757,14 +757,14 @@ Open Issues
- Issue with clearing the Interrupt signal (Open 457 days)
+ Issue with clearing the Interrupt signal (Open 458 days)
- No deinit() method on DigitalInOut class (Open 1091 days)
+ No deinit() method on DigitalInOut class (Open 1092 days)
@@ -778,7 +778,7 @@ Open Issues
- AWS IoT SDK Python V2 Support (Open 703 days)
+ AWS IoT SDK Python V2 Support (Open 704 days)
enhancement
@@ -794,42 +794,42 @@ Open Issues
- IoTCentralDevice doesn't fully implement IoTMQTTCallback (Open 473 days)
+ IoTCentralDevice doesn't fully implement IoTMQTTCallback (Open 474 days)
- device.on_command_executed is never called, IoT Central methods can't be used (Open 581 days)
+ device.on_command_executed is never called, IoT Central methods can't be used (Open 582 days)
- Subscribing to topic /messages/devicebound/ results in wait_for_msg timeout exception (Open 587 days)
+ Subscribing to topic /messages/devicebound/ results in wait_for_msg timeout exception (Open 588 days)
- Consistent `MMQTTException: Connection Refused - Unauthorized` after 2-2.5 hours uptime (Open 856 days)
+ Consistent `MMQTTException: Connection Refused - Unauthorized` after 2-2.5 hours uptime (Open 857 days)
- Issues using on Arduino Nano RP2040 Connect (Open 909 days)
+ Issues using on Arduino Nano RP2040 Connect (Open 910 days)
- RuntimeError: Repeated socket failures on ESP32-S2 (Open 919 days)
+ RuntimeError: Repeated socket failures on ESP32-S2 (Open 920 days)
@@ -838,7 +838,7 @@ Open Issues
Add support for IoT Central components (Open 1381 days)
+ help-wanted">Add support for IoT Central components (Open 1382 days)
enhancement
@@ -853,7 +853,7 @@ Open Issues
Add support for X.509 certificates (Open 1592 days)
+ help-wanted">Add support for X.509 certificates (Open 1593 days)
enhancement
@@ -877,7 +877,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -901,7 +901,7 @@ Open Issues
- TTF support (Open 2012 days)
+ TTF support (Open 2013 days)
enhancement
@@ -917,7 +917,7 @@ Open Issues
- Add support for broadcom (raspberry pi) (Open 1055 days)
+ Add support for broadcom (raspberry pi) (Open 1056 days)
@@ -931,70 +931,70 @@ Open Issues
- BLE HID OUT report handling seems not to be implemented. (Open 12 days)
+ BLE HID OUT report handling seems not to be implemented. (Open 13 days)
- Async API (Open 80 days)
+ Async API (Open 81 days)
- TimeoutError when Trying to recive service from connection (Open 190 days)
+ TimeoutError when Trying to recive service from connection (Open 191 days)
- add addtional service to ProvideServicesAdvertisement (Open 206 days)
+ add addtional service to ProvideServicesAdvertisement (Open 207 days)
- Failed to connect: internal error (Open 367 days)
+ Failed to connect: internal error (Open 368 days)
- adafruit-circuitpython-ble using bleak does not recognize custom StandardUUID (Open 440 days)
+ adafruit-circuitpython-ble using bleak does not recognize custom StandardUUID (Open 441 days)
- RuntimeError: No adapter available (Open 537 days)
+ RuntimeError: No adapter available (Open 538 days)
- Pyportal Titano BLE advertisement length error (Open 568 days)
+ Pyportal Titano BLE advertisement length error (Open 569 days)
- memory allocation error in simpletest (Open 629 days)
+ memory allocation error in simpletest (Open 630 days)
- Allow access to Service Changed Characteristic (Open 680 days)
+ Allow access to Service Changed Characteristic (Open 681 days)
@@ -1003,7 +1003,7 @@ Open Issues
Add Telephony Device Page (0x0B) HID_DESCRIPTOR (Open 830 days)
+ ble">Add Telephony Device Page (0x0B) HID_DESCRIPTOR (Open 831 days)
enhancement
@@ -1016,70 +1016,70 @@ Open Issues
- Advertisement Names (Open 919 days)
+ Advertisement Names (Open 920 days)
- BLE connection hangs after 25 seconds (Open 923 days)
+ BLE connection hangs after 25 seconds (Open 924 days)
- What causes the "NotImplementedError" in my Python code when I try to start advertising? (Open 951 days)
+ What causes the "NotImplementedError" in my Python code when I try to start advertising? (Open 952 days)
- ValueError on BLERadio.start_scan() and ble_detailed_scan.py (Open 1110 days)
+ ValueError on BLERadio.start_scan() and ble_detailed_scan.py (Open 1111 days)
- How to set HID properties manufacturer_string and product_string (Open 1128 days)
+ How to set HID properties manufacturer_string and product_string (Open 1129 days)
- UARTService.readinto with "memoryview" slice and "bytearrary" causes ValueError: length argument not allowed for this type (Open 1206 days)
+ UARTService.readinto with "memoryview" slice and "bytearrary" causes ValueError: length argument not allowed for this type (Open 1207 days)
- Can't use multiprocessing on the BLE connections to retrieve data from multipe devices at the same time (Open 1349 days)
+ Can't use multiprocessing on the BLE connections to retrieve data from multipe devices at the same time (Open 1350 days)
- Does advertising.standard.ManufacturerDataField.field_names currently serve a purpose? (Open 1420 days)
+ Does advertising.standard.ManufacturerDataField.field_names currently serve a purpose? (Open 1421 days)
- High CPU usage with BLEUART (Open 1456 days)
+ High CPU usage with BLEUART (Open 1457 days)
- soft device error: 0004 when paring with BLE HID peripheral (Open 1523 days)
+ soft device error: 0004 when paring with BLE HID peripheral (Open 1524 days)
bug
@@ -1088,7 +1088,7 @@ Open Issues
- ComplexCharacteristic does not pass fixed_length instance variable to _bleio.Characteristic.add_to_service (Open 1578 days)
+ ComplexCharacteristic does not pass fixed_length instance variable to _bleio.Characteristic.add_to_service (Open 1579 days)
bug
@@ -1097,7 +1097,7 @@ Open Issues
- CircuitPython Locks Up on Disconnect (Open 1607 days)
+ CircuitPython Locks Up on Disconnect (Open 1608 days)
bug
@@ -1106,7 +1106,7 @@ Open Issues
- A custom Advertisement with a constructor can fail to parse incoming BLE data correctly (Open 1634 days)
+ A custom Advertisement with a constructor can fail to parse incoming BLE data correctly (Open 1635 days)
bug
@@ -1115,7 +1115,7 @@ Open Issues
- BLE keyboard or mouse as input (Open 1648 days)
+ BLE keyboard or mouse as input (Open 1649 days)
enhancement
@@ -1124,7 +1124,7 @@ Open Issues
- More thorough documentation (Open 1676 days)
+ More thorough documentation (Open 1677 days)
documentation
@@ -1133,7 +1133,7 @@ Open Issues
- Wrap _bleio exceptions which might get thrown to user code (Open 1804 days)
+ Wrap _bleio exceptions which might get thrown to user code (Open 1805 days)
enhancement
@@ -1142,7 +1142,7 @@ Open Issues
- Add Advertisement length checking. (Open 1808 days)
+ Add Advertisement length checking. (Open 1809 days)
enhancement
@@ -1151,7 +1151,7 @@ Open Issues
- UARTService: allow setting of buffer sizes, timeouts, and UUID (Open 1813 days)
+ UARTService: allow setting of buffer sizes, timeouts, and UUID (Open 1814 days)
enhancement
@@ -1167,14 +1167,14 @@ Open Issues
- Adafruit WebBluetooth Dashboard (Open 217 days)
+ Adafruit WebBluetooth Dashboard (Open 218 days)
- ble_adafruit_simpletest_client.py seems to stuck on a value (Open 1542 days)
+ ble_adafruit_simpletest_client.py seems to stuck on a value (Open 1543 days)
bug
@@ -1190,7 +1190,7 @@ Open Issues
- Picking new tracks in Music and Podcast apps cause error (Open 1762 days)
+ Picking new tracks in Music and Podcast apps cause error (Open 1763 days)
bug
@@ -1206,21 +1206,21 @@ Open Issues
- Infrequent/slow sensor polling (Open 858 days)
+ Infrequent/slow sensor polling (Open 859 days)
- Can't use multiprocessing on the BLE connections to retrieve data from multipe devices at the same time (Open 1349 days)
+ Can't use multiprocessing on the BLE connections to retrieve data from multipe devices at the same time (Open 1350 days)
- Raspberry Pi 4 "Service Discovery Error" (Open 1568 days)
+ Raspberry Pi 4 "Service Discovery Error" (Open 1569 days)
bug
@@ -1236,14 +1236,14 @@ Open Issues
- Fails to find advertisement on nRF52 (Open 1308 days)
+ Fails to find advertisement on nRF52 (Open 1309 days)
- Bluetooth LE Sensor Nodes to Raspberry Pi WiFi Bridge - Stuck at scanning (Open 1607 days)
+ Bluetooth LE Sensor Nodes to Raspberry Pi WiFi Bridge - Stuck at scanning (Open 1608 days)
bug
@@ -1252,7 +1252,7 @@ Open Issues
- Clarification on broadcast_time arg for broadcast() (Open 1626 days)
+ Clarification on broadcast_time arg for broadcast() (Open 1627 days)
documentation
@@ -1261,7 +1261,7 @@ Open Issues
- Possible type bugs for wire types in AdafruitSensorMeasurement (Open 1648 days)
+ Possible type bugs for wire types in AdafruitSensorMeasurement (Open 1649 days)
bug
@@ -1270,7 +1270,7 @@ Open Issues
- Add ChaCha support for basic security (Open 1726 days)
+ Add ChaCha support for basic security (Open 1727 days)
enhancement
@@ -1286,7 +1286,7 @@ Open Issues
- Is it possible run multiple ble_cycling_speed_and_cadence_simpletest.py to connect multiple Cadence devices at the same time? (Open 109 days)
+ Is it possible run multiple ble_cycling_speed_and_cadence_simpletest.py to connect multiple Cadence devices at the same time? (Open 110 days)
@@ -1302,7 +1302,7 @@ Open Issues
Missing Type Annotations (Open 1147 days)
+ hacktoberfest">Missing Type Annotations (Open 1148 days)
documentation
@@ -1315,7 +1315,7 @@ Open Issues
- Please add (unencrypted) TLM data. (Open 1674 days)
+ Please add (unencrypted) TLM data. (Open 1675 days)
enhancement
@@ -1324,7 +1324,7 @@ Open Issues
- add error message for long URLs (Open 1732 days)
+ add error message for long URLs (Open 1733 days)
bug
@@ -1340,49 +1340,49 @@ Open Issues
- Docs build broken (Open 11 days)
+ Docs build broken (Open 12 days)
- Examples in Docs links broken (Open 160 days)
+ Examples in Docs links broken (Open 161 days)
- client as web application or android or ios (Open 204 days)
+ client as web application or android or ios (Open 205 days)
- Add filesystem size info (Open 1258 days)
+ Add filesystem size info (Open 1259 days)
- Add busy state (Open 1287 days)
+ Add busy state (Open 1288 days)
- Add Format (Open 1287 days)
+ Add Format (Open 1288 days)
- Add Copy (Open 1287 days)
+ Add Copy (Open 1288 days)
@@ -1396,7 +1396,7 @@ Open Issues
- Unable to retrieve RR intervals from Scosche Rhythm+2.0 or Rhythm24 (Open 637 days)
+ Unable to retrieve RR intervals from Scosche Rhythm+2.0 or Rhythm24 (Open 638 days)
@@ -1410,7 +1410,7 @@ Open Issues
- Passive BLE seems a better way to get the sensor values (Open 815 days)
+ Passive BLE seems a better way to get the sensor values (Open 816 days)
@@ -1424,7 +1424,7 @@ Open Issues
- Simultaneous MIDI BLE notes not played. (Open 1681 days)
+ Simultaneous MIDI BLE notes not played. (Open 1682 days)
enhancement
@@ -1440,7 +1440,7 @@ Open Issues
- Run tests in Actions (Open 1542 days)
+ Run tests in Actions (Open 1543 days)
enhancement
@@ -1449,7 +1449,7 @@ Open Issues
- Bluefruit Playground advertisements and Radio advertisements both using id 1 (Open 1676 days)
+ Bluefruit Playground advertisements and Radio advertisements both using id 1 (Open 1677 days)
bug
@@ -1465,7 +1465,7 @@ Open Issues
- Pinout query returns 'Assuming Arduino Uno' (Open 1541 days)
+ Pinout query returns 'Assuming Arduino Uno' (Open 1542 days)
bug
@@ -1474,7 +1474,7 @@ Open Issues
- Missing image_packet.py (Open 1768 days)
+ Missing image_packet.py (Open 1769 days)
enhancement
@@ -1490,7 +1490,7 @@ Open Issues
- Library uses short argument names (Open 738 days)
+ Library uses short argument names (Open 739 days)
@@ -1499,7 +1499,7 @@ Open Issues
Missing Type Annotations (Open 1147 days)
+ hacktoberfest">Missing Type Annotations (Open 1148 days)
documentation
@@ -1512,7 +1512,7 @@ Open Issues
- read_packet needs to check for leftover data in self._buffer (Open 2171 days)
+ read_packet needs to check for leftover data in self._buffer (Open 2172 days)
bug
@@ -1521,7 +1521,7 @@ Open Issues
- ATI command works ok but errors when debug is used - gives Error (id:0xa180) (Open 2171 days)
+ ATI command works ok but errors when debug is used - gives Error (id:0xa180) (Open 2172 days)
bug
@@ -1530,7 +1530,7 @@ Open Issues
- HID example code (Open 2204 days)
+ HID example code (Open 2205 days)
enhancement
@@ -1550,7 +1550,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -1567,7 +1567,7 @@ Open Issues
- Align code in this library to Adafruit code for ESP32, ESP8266, etc. (Open 2030 days)
+ Align code in this library to Adafruit code for ESP32, ESP8266, etc. (Open 2031 days)
enhancement
@@ -1583,7 +1583,7 @@ Open Issues
- Gas sensor values fundamentally UNRELIABLE & BROKEN in multiple ways (Open 49 days)
+ Gas sensor values fundamentally UNRELIABLE & BROKEN in multiple ways (Open 50 days)
@@ -1597,7 +1597,7 @@ Open Issues
- I2C works, but SPI fails due to wrong chip id (Open 108 days)
+ I2C works, but SPI fails due to wrong chip id (Open 109 days)
@@ -1608,7 +1608,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -1636,7 +1636,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -1660,14 +1660,14 @@ Open Issues
- Reading all zeros (Open 88 days)
+ Reading all zeros (Open 89 days)
- Some mode setters seem to have no effect (Open 154 days)
+ Some mode setters seem to have no effect (Open 155 days)
@@ -1678,7 +1678,7 @@ Open Issues
hacktoberfest
- good-first-issue">DisplayIO Example Wanted (Open 197 days)
+ good-first-issue">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -1695,49 +1695,49 @@ Open Issues
- Failed to initialize BNO055 in Jetson Orin Nano (Open 291 days)
+ Failed to initialize BNO055 in Jetson Orin Nano (Open 292 days)
- How to obtain absolute orientation? (Open 391 days)
+ How to obtain absolute orientation? (Open 392 days)
- I2C I/O Error on Teensy 4.1 (Open 435 days)
+ I2C I/O Error on Teensy 4.1 (Open 436 days)
- Mode must not be a fusion mode (Open 474 days)
+ Mode must not be a fusion mode (Open 475 days)
- Try to do error recovery and make library more robust on mimxrt1011 and other chip families. (Open 586 days)
+ Try to do error recovery and make library more robust on mimxrt1011 and other chip families. (Open 587 days)
- Euler angles give a random -0.065 value (Open 733 days)
+ Euler angles give a random -0.065 value (Open 734 days)
- How do I use the BNO055 COMPASS_MODE to determine compass heading? (Open 961 days)
+ How do I use the BNO055 COMPASS_MODE to determine compass heading? (Open 962 days)
enhancement
@@ -1746,14 +1746,14 @@ Open Issues
- WebGL Example - Incorrect rotation on screen (Open 1027 days)
+ WebGL Example - Incorrect rotation on screen (Open 1028 days)
- Re-using calibration data (Open 1438 days)
+ Re-using calibration data (Open 1439 days)
enhancement
@@ -1762,7 +1762,7 @@ Open Issues
- Library too large for smaller boards (Open 1469 days)
+ Library too large for smaller boards (Open 1470 days)
@@ -1776,7 +1776,7 @@ Open Issues
- Remap axis (Open 133 days)
+ Remap axis (Open 134 days)
@@ -1787,7 +1787,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -1804,42 +1804,42 @@ Open Issues
- Tare Functionality (Open 199 days)
+ Tare Functionality (Open 200 days)
- Unprocessable Batch bytes (Open 290 days)
+ Unprocessable Batch bytes (Open 291 days)
- Error during UART initialization (Open 373 days)
+ Error during UART initialization (Open 374 days)
- Option to disable dynamic calibration (Open 395 days)
+ Option to disable dynamic calibration (Open 396 days)
- Can not set data rate for each report (Open 395 days)
+ Can not set data rate for each report (Open 396 days)
- Cannot run on top of micropython (Open 540 days)
+ Cannot run on top of micropython (Open 541 days)
bug
@@ -1848,56 +1848,56 @@ Open Issues
- Try to do error recovery and make library more robust (Open 586 days)
+ Try to do error recovery and make library more robust (Open 587 days)
- Has SPI mode been tested? (Open 751 days)
+ Has SPI mode been tested? (Open 752 days)
- Help!Raspberry PI3 conected to BNO080 are having problems. (Open 1120 days)
+ Help!Raspberry PI3 conected to BNO080 are having problems. (Open 1121 days)
- Gyro and Accelerometer calibration issue (Open 1182 days)
+ Gyro and Accelerometer calibration issue (Open 1183 days)
- Not working with I2C on MCP2221 (Open 1207 days)
+ Not working with I2C on MCP2221 (Open 1208 days)
- Any chance of seeing the additional reports added? (Open 1226 days)
+ Any chance of seeing the additional reports added? (Open 1227 days)
- SPI class limited to boards with internal pull ups (Open 1325 days)
+ SPI class limited to boards with internal pull ups (Open 1326 days)
- Duplicate code in library files - potential refactor needed (Open 1354 days)
+ Duplicate code in library files - potential refactor needed (Open 1355 days)
enhancement
@@ -1917,7 +1917,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -1941,7 +1941,7 @@ Open Issues
- I2C init bug causes 10 seconds delay on the Jetson TX2 / Nano (Open 1236 days)
+ I2C init bug causes 10 seconds delay on the Jetson TX2 / Nano (Open 1237 days)
@@ -1959,7 +1959,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -1983,7 +1983,7 @@ Open Issues
- Library uses short argument names (Open 738 days)
+ Library uses short argument names (Open 739 days)
enhancement
@@ -1992,28 +1992,28 @@ Open Issues
- While using the i2c/SPI LCD Backpack Maximum recursion depth exceeded (Open 1127 days)
+ While using the i2c/SPI LCD Backpack Maximum recursion depth exceeded (Open 1128 days)
- Row Offsets for 16x4 display. (Open 1184 days)
+ Row Offsets for 16x4 display. (Open 1185 days)
- Message draw slow compared to legacy library (Adafruit_CharLCDPlate) (Open 1394 days)
+ Message draw slow compared to legacy library (Adafruit_CharLCDPlate) (Open 1395 days)
- MemoryError on Metro M0 Express (Open 2061 days)
+ MemoryError on Metro M0 Express (Open 2062 days)
bug
@@ -2029,7 +2029,7 @@ Open Issues
- sound_meter example fails on Circuit Playground Bluefruit (Open 1797 days)
+ sound_meter example fails on Circuit Playground Bluefruit (Open 1798 days)
bug
@@ -2045,14 +2045,14 @@ Open Issues
- Evaluating crickit in repl causes dc_motor_1 only to spin. (Open 67 days)
+ Evaluating crickit in repl causes dc_motor_1 only to spin. (Open 68 days)
- Add quadrature encoder support? (Open 2155 days)
+ Add quadrature encoder support? (Open 2156 days)
enhancement
@@ -2068,7 +2068,7 @@ Open Issues
- Missing parameter docstrings (Open 489 days)
+ Missing parameter docstrings (Open 490 days)
documentation
@@ -2084,14 +2084,14 @@ Open Issues
- TZ and zoneinfo support (Open 85 days)
+ TZ and zoneinfo support (Open 86 days)
- Support more iso formats like python 11 (Open 682 days)
+ Support more iso formats like python 11 (Open 683 days)
enhancement
@@ -2100,7 +2100,7 @@ Open Issues
- Cannot add 'date' and 'timedelta' types (Open 963 days)
+ Cannot add 'date' and 'timedelta' types (Open 964 days)
enhancement
@@ -2120,7 +2120,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -2137,91 +2137,91 @@ Open Issues
- Raspberry Pi 4 + DHT11 Sensor no floating point temps (Open 217 days)
+ Raspberry Pi 4 + DHT11 Sensor no floating point temps (Open 218 days)
- Raspberry Pi 5 - Import error - All GPIO related operation (Open 334 days)
+ Raspberry Pi 5 - Import error - All GPIO related operation (Open 335 days)
- Offbrand DHT11 Not working (Open 543 days)
+ Offbrand DHT11 Not working (Open 544 days)
- bcm283x pulseio _mq.receive stuck after SIGINT(CTRL-C) (Open 555 days)
+ bcm283x pulseio _mq.receive stuck after SIGINT(CTRL-C) (Open 556 days)
- DHT does not work with root user using Raspberry Zero WH (Open 1189 days)
+ DHT does not work with root user using Raspberry Zero WH (Open 1190 days)
- [RaspberryPi 4B & DHT11] Checksum did not validate. /A full buffer was not returned. (Open 1257 days)
+ [RaspberryPi 4B & DHT11] Checksum did not validate. /A full buffer was not returned. (Open 1258 days)
- Initialization error? (Open 1328 days)
+ Initialization error? (Open 1329 days)
- Overflow Error After Querying Sensor Every 2 Seconds for ~2 Hours (Open 1340 days)
+ Overflow Error After Querying Sensor Every 2 Seconds for ~2 Hours (Open 1341 days)
- DHT11 not working properly (Open 1342 days)
+ DHT11 not working properly (Open 1343 days)
- DHT22 not working on Raspberry Pi wh (Open 1354 days)
+ DHT22 not working on Raspberry Pi wh (Open 1355 days)
- DHT22 reports wrong negative temperatures (Open 1386 days)
+ DHT22 reports wrong negative temperatures (Open 1387 days)
- libgpiod_pulsein is armhf 32-bits, doesn't work on 64-bits OS (Open 1496 days)
+ libgpiod_pulsein is armhf 32-bits, doesn't work on 64-bits OS (Open 1497 days)
- ValueError: Object has been deinitialized and can no longer be used. (Open 1675 days)
+ ValueError: Object has been deinitialized and can no longer be used. (Open 1676 days)
bug
@@ -2230,7 +2230,7 @@ Open Issues
- DHT22 report null after a while (Open 1700 days)
+ DHT22 report null after a while (Open 1701 days)
bug
@@ -2239,7 +2239,7 @@ Open Issues
- A full buffer was not returned. Try again. (Open 1738 days)
+ A full buffer was not returned. Try again. (Open 1739 days)
bug
@@ -2248,7 +2248,7 @@ Open Issues
- Unable to set line 4 to input (Open 1817 days)
+ Unable to set line 4 to input (Open 1818 days)
bug
@@ -2264,7 +2264,7 @@ Open Issues
- Button Registering Twice (Open 350 days)
+ Button Registering Twice (Open 351 days)
@@ -2273,7 +2273,7 @@ Open Issues
Missing Type Annotations (Open 1147 days)
+ hacktoberfest">Missing Type Annotations (Open 1148 days)
documentation
@@ -2293,14 +2293,7 @@ Open Issues
- Fill for polygons (Open 401 days)
-
-
-
-
-
-
- updating coordinates of a shape (Open 542 days)
+ updating coordinates of a shape (Open 543 days)
enhancement
@@ -2316,14 +2309,14 @@ Open Issues
- Height Difference Between Label and BitmapLabel (Open 3 days)
+ Height Difference Between Label and BitmapLabel (Open 4 days)
- Feature Request: wrap_text_to_pixels truncate argument (Open 224 days)
+ Feature Request: wrap_text_to_pixels truncate argument (Open 225 days)
@@ -2337,7 +2330,7 @@ Open Issues
- Feature Request: Line Colors for Cartesian Plot Lines (Open 484 days)
+ Feature Request: Line Colors for Cartesian Plot Lines (Open 485 days)
enhancement
@@ -2346,28 +2339,28 @@ Open Issues
- featurerequest: widget.cartesian - multiple line-plots in same axis (Open 1067 days)
+ featurerequest: widget.cartesian - multiple line-plots in same axis (Open 1068 days)
- Why is `anchor_point` reset for cell contents? (Open 1170 days)
+ Why is `anchor_point` reset for cell contents? (Open 1171 days)
- `Control` class: Common response function names (Open 1341 days)
+ `Control` class: Common response function names (Open 1342 days)
- Suggestions based on current status. (Open 1390 days)
+ Suggestions based on current status. (Open 1391 days)
@@ -2381,14 +2374,14 @@ Open Issues
- Return of the wake/sleep issue (Open 36 days)
+ Return of the wake/sleep issue (Open 37 days)
- Raspberry pi pico sh1106 display issues (Open 1235 days)
+ Raspberry pi pico sh1106 display issues (Open 1236 days)
@@ -2402,14 +2395,14 @@ Open Issues
- After display init, settings of 'rotation' are 90 degrees from expected (Open 166 days)
+ After display init, settings of 'rotation' are 90 degrees from expected (Open 167 days)
- Power on delay - potential enhancement (Open 790 days)
+ Power on delay - potential enhancement (Open 791 days)
@@ -2423,28 +2416,28 @@ Open Issues
- High CPU consumption even with auto_refresh=False (Open 59 days)
+ High CPU consumption even with auto_refresh=False (Open 60 days)
- sleep() and wake() throw errors on Blinka (Open 102 days)
+ sleep() and wake() throw errors on Blinka (Open 103 days)
- Bitmap Label does not update using displayio (Open 129 days)
+ Bitmap Label does not update using displayio (Open 130 days)
- Needs further fixing to be warning-free on 9.0 while working on 8.x. (Open 237 days)
+ Needs further fixing to be warning-free on 9.0 while working on 8.x. (Open 238 days)
bug
@@ -2460,14 +2453,14 @@ Open Issues
- [itsyBitsy nRF52840 express] changing the pixel value of `DotStar` instance only works when the board has been booted when USB connected (Open 40 days)
+ [itsyBitsy nRF52840 express] changing the pixel value of `DotStar` instance only works when the board has been booted when USB connected (Open 41 days)
- example `dotstar_image_pov.py` imports PIL (Open 453 days)
+ example `dotstar_image_pov.py` imports PIL (Open 454 days)
@@ -2485,7 +2478,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -2509,7 +2502,7 @@ Open Issues
- Library uses unconventional argument names (Open 738 days)
+ Library uses unconventional argument names (Open 739 days)
enhancement
@@ -2529,7 +2522,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -2553,7 +2546,7 @@ Open Issues
- OneWireIO is not implemeted yet, state this in the Readme (Open 185 days)
+ OneWireIO is not implemeted yet, state this in the Readme (Open 186 days)
@@ -2564,7 +2557,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -2581,7 +2574,7 @@ Open Issues
- I Keep getting this error even when the family code is right (Open 706 days)
+ I Keep getting this error even when the family code is right (Open 707 days)
@@ -2595,7 +2588,7 @@ Open Issues
- [Feature Request] Implement ds18b20 config (Open 89 days)
+ [Feature Request] Implement ds18b20 config (Open 90 days)
enhancement
@@ -2611,14 +2604,14 @@ Open Issues
- Is there a way to use this library with micropython ESP32? (Open 704 days)
+ Is there a way to use this library with micropython ESP32? (Open 705 days)
- Alarm triggering prematurely for certain times (Open 955 days)
+ Alarm triggering prematurely for certain times (Open 956 days)
@@ -2632,7 +2625,7 @@ Open Issues
- No long integer support for adafruit_ducky (Open 550 days)
+ No long integer support for adafruit_ducky (Open 551 days)
@@ -2646,14 +2639,14 @@ Open Issues
- Overriding property getter and setters is not supported in Circuitpython (Open 613 days)
+ Overriding property getter and setters is not supported in Circuitpython (Open 614 days)
- Using the example LUT example with an actual board does not work (Open 1002 days)
+ Using the example LUT example with an actual board does not work (Open 1003 days)
@@ -2662,7 +2655,7 @@ Open Issues
Missing Type Annotations (Open 1147 days)
+ hacktoberfest">Missing Type Annotations (Open 1148 days)
documentation
@@ -2686,7 +2679,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -2710,21 +2703,21 @@ Open Issues
- Can use it for 2.7inch E-paper HAT and RP2040 pico. #83 (Open 141 days)
+ Can use it for 2.7inch E-paper HAT and RP2040 pico. #83 (Open 142 days)
- Unable to correctly drive 3-color display (InkyWHAT) (Open 192 days)
+ Unable to correctly drive 3-color display (InkyWHAT) (Open 193 days)
- Code fails duplicate-code check, consider refactor (Open 880 days)
+ Code fails duplicate-code check, consider refactor (Open 881 days)
enhancement
@@ -2740,77 +2733,77 @@ Open Issues
- Timed out waiting for SPI char (Open 102 days)
+ Timed out waiting for SPI char (Open 103 days)
- Make sockets compatible with native `ssl` / CPython (Open 184 days)
+ Make sockets compatible with native `ssl` / CPython (Open 185 days)
- Remove allowing `dict` arg to `connect()` and other backward compatible (Open 199 days)
+ Remove allowing `dict` arg to `connect()` and other backward compatible (Open 200 days)
- Debugging mode socket_status() call breaks UDP packet reading (Open 248 days)
+ Debugging mode socket_status() call breaks UDP packet reading (Open 249 days)
- wrong connection error messages from connect_AP method (Open 265 days)
+ wrong connection error messages from connect_AP method (Open 266 days)
- socket.settimeout() Argument 0 value meaning differs from cpython (Open 293 days)
+ socket.settimeout() Argument 0 value meaning differs from cpython (Open 294 days)
- Unable to connect to WiFi with duplicate SSIDs (Open 460 days)
+ Unable to connect to WiFi with duplicate SSIDs (Open 461 days)
- SPI lock not aquired (Open 853 days)
+ SPI lock not aquired (Open 854 days)
- TimeoutError: Timed out waiting for SPI char (Teensy 4.0 + Adafruit AirLift FeatherWing - ESP32 WiFi Co-Processor) (Open 862 days)
+ TimeoutError: Timed out waiting for SPI char (Teensy 4.0 + Adafruit AirLift FeatherWing - ESP32 WiFi Co-Processor) (Open 863 days)
- Arduion Nano RP2040 Connect Issues (Open 1037 days)
+ Arduion Nano RP2040 Connect Issues (Open 1038 days)
- Arduino RP2040 connect wifi UDP - Multicast group not working (Open 1124 days)
+ Arduino RP2040 connect wifi UDP - Multicast group not working (Open 1125 days)
@@ -2819,7 +2812,7 @@ Open Issues
Missing Type Annotations (Open 1147 days)
+ hacktoberfest">Missing Type Annotations (Open 1148 days)
documentation
@@ -2832,42 +2825,42 @@ Open Issues
- RGB LED doesn't turn off on arduino nano connect 2040 (Open 1191 days)
+ RGB LED doesn't turn off on arduino nano connect 2040 (Open 1192 days)
- UDP send() does not clear esp32 write buffer (Open 1307 days)
+ UDP send() does not clear esp32 write buffer (Open 1308 days)
- Only allows one TLS connection at a time (Open 1313 days)
+ Only allows one TLS connection at a time (Open 1314 days)
- esp.disconnect leaves the ESP32 in a bad state (Open 1319 days)
+ esp.disconnect leaves the ESP32 in a bad state (Open 1320 days)
- ESP_SPIcontrol._wait_for_ready is eating lots of time polling the READY/BUSY pin (Open 1510 days)
+ ESP_SPIcontrol._wait_for_ready is eating lots of time polling the READY/BUSY pin (Open 1511 days)
- Add a reconnect method to the WiFi manager (Open 1629 days)
+ Add a reconnect method to the WiFi manager (Open 1630 days)
enhancement
@@ -2876,7 +2869,7 @@ Open Issues
- Radio and Connection Sleep/Reopen (Open 1923 days)
+ Radio and Connection Sleep/Reopen (Open 1924 days)
enhancement
@@ -2885,7 +2878,7 @@ Open Issues
- json error in get (Open 2097 days)
+ json error in get (Open 2098 days)
bug
@@ -2901,42 +2894,42 @@ Open Issues
- core API compatible rewrite of the ESP32 AT interface (Open 69 days)
+ core API compatible rewrite of the ESP32 AT interface (Open 70 days)
- Documentation Update: Release 0.10.x breaks ESP8266 chips with AT+CIPSTATE (Open 296 days)
+ Documentation Update: Release 0.10.x breaks ESP8266 chips with AT+CIPSTATE (Open 297 days)
- Implement AT+CIPSERVER for creating a TCP/SSL Server (Open 704 days)
+ Implement AT+CIPSERVER for creating a TCP/SSL Server (Open 705 days)
- Example SoftAP Mode? (Open 807 days)
+ Example SoftAP Mode? (Open 808 days)
- Error with Pico & ESP-01 (Open 1044 days)
+ Error with Pico & ESP-01 (Open 1045 days)
- MAC addr reading (Open 2130 days)
+ MAC addr reading (Open 2131 days)
enhancement
@@ -2945,7 +2938,7 @@ Open Issues
- Request: Sleep/Deep Sleep (Open 2147 days)
+ Request: Sleep/Deep Sleep (Open 2148 days)
enhancement
@@ -2961,7 +2954,7 @@ Open Issues
- Loading settings.toml file yieds generic error (Open 188 days)
+ Loading settings.toml file yieds generic error (Open 189 days)
@@ -2975,7 +2968,7 @@ Open Issues
- Library uses short argument names (Open 741 days)
+ Library uses short argument names (Open 742 days)
enhancement
@@ -2984,7 +2977,7 @@ Open Issues
- Feature request support okhsv colorspace (Open 927 days)
+ Feature request support okhsv colorspace (Open 928 days)
@@ -2998,42 +2991,42 @@ Open Issues
- How can I use Adafruit_CircuitPython_Fingerprint in Micropython to run on ESP32 wroom. (Open 65 days)
+ How can I use Adafruit_CircuitPython_Fingerprint in Micropython to run on ESP32 wroom. (Open 66 days)
- Compare print to file Error (Open 258 days)
+ Compare print to file Error (Open 259 days)
- AS608 Optical Fingerprint Sensor With Raspberry PI is not waiting for finger input (Open 568 days)
+ AS608 Optical Fingerprint Sensor With Raspberry PI is not waiting for finger input (Open 569 days)
- Aura LED control not functioning (Open 944 days)
+ Aura LED control not functioning (Open 945 days)
- Rename template upload/download to R503 specific (Open 1345 days)
+ Rename template upload/download to R503 specific (Open 1346 days)
- template_compare fails on PID4750 (Open 1349 days)
+ template_compare fails on PID4750 (Open 1350 days)
@@ -3047,7 +3040,7 @@ Open Issues
- update pinouts in examples (Open 720 days)
+ update pinouts in examples (Open 721 days)
@@ -3061,14 +3054,14 @@ Open Issues
- I2C Timeout - M5stack cores3 (Open 208 days)
+ I2C Timeout - M5stack cores3 (Open 209 days)
- Occasionally has difficulty decoding packets (Open 397 days)
+ Occasionally has difficulty decoding packets (Open 398 days)
@@ -3082,14 +3075,14 @@ Open Issues
- Persistent Issue with Initialising FONA (Open 536 days)
+ Persistent Issue with Initialising FONA (Open 537 days)
- Library uses short argument names (Open 738 days)
+ Library uses short argument names (Open 739 days)
enhancement
@@ -3105,21 +3098,21 @@ Open Issues
- Another example font3x5.bin to show text writing (Open 208 days)
+ Another example font3x5.bin to show text writing (Open 209 days)
- Test for Usable Characters (Open 650 days)
+ Test for Usable Characters (Open 651 days)
- add support for GS4_HMSB (Open 680 days)
+ add support for GS4_HMSB (Open 681 days)
enhancement
@@ -3128,14 +3121,14 @@ Open Issues
- Missing support for RGB565 (Open 719 days)
+ Missing support for RGB565 (Open 720 days)
- framebuf.text() function is very slow (Open 957 days)
+ framebuf.text() function is very slow (Open 958 days)
@@ -3144,7 +3137,7 @@ Open Issues
Missing Type Annotations (Open 1147 days)
+ hacktoberfest">Missing Type Annotations (Open 1148 days)
documentation
@@ -3164,14 +3157,14 @@ Open Issues
- 3.5" Cap Touch has extra touches (Open 253 days)
+ 3.5" Cap Touch has extra touches (Open 254 days)
- X and Y coordinates (Open 279 days)
+ X and Y coordinates (Open 280 days)
@@ -3189,7 +3182,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -3217,7 +3210,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -3241,14 +3234,14 @@ Open Issues
- Import depth is too deep - max recursion stack traces being thrown on import (Open 1138 days)
+ Import depth is too deep - max recursion stack traces being thrown on import (Open 1139 days)
- Change publish kwarg order to match other MiniMQTT API libraries (Open 1866 days)
+ Change publish kwarg order to match other MiniMQTT API libraries (Open 1867 days)
enhancement
@@ -3264,28 +3257,28 @@ Open Issues
- Fix Quality 3d returns undocumented values (Open 41 days)
+ Fix Quality 3d returns undocumented values (Open 42 days)
- Library not returning datetime when valid datetime is available from battery-backed RTC on Ultimate GPS Featherwing (Open 409 days)
+ Library not returning datetime when valid datetime is available from battery-backed RTC on Ultimate GPS Featherwing (Open 410 days)
- Added decoding to detect an external antenna (extension) and its status. (Open 688 days)
+ Added decoding to detect an external antenna (extension) and its status. (Open 689 days)
- ValueError and IndexError or soft reboot in 3.10.6 (Open 746 days)
+ ValueError and IndexError or soft reboot in 3.10.6 (Open 747 days)
bug
@@ -3294,21 +3287,21 @@ Open Issues
- Fix Timestamp not working on GPS Featherwing (Open 869 days)
+ Fix Timestamp not working on GPS Featherwing (Open 870 days)
- Lag in receiving gps lat long values (Open 962 days)
+ Lag in receiving gps lat long values (Open 963 days)
- adafruit_gps.GPS gives no indication how current the value of the datetime property is (Open 1049 days)
+ adafruit_gps.GPS gives no indication how current the value of the datetime property is (Open 1050 days)
@@ -3326,7 +3319,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -3343,7 +3336,7 @@ Open Issues
- Does not work well without pulseio (Open 924 days)
+ Does not work well without pulseio (Open 925 days)
bug
@@ -3352,7 +3345,7 @@ Open Issues
- Many failed distance reedings "Retrying" before a valid distance value comes up (Open 1411 days)
+ Many failed distance reedings "Retrying" before a valid distance value comes up (Open 1412 days)
@@ -3366,7 +3359,7 @@ Open Issues
- Heater setting function has a print(_power) statement (Open 15 days)
+ Heater setting function has a print(_power) statement (Open 16 days)
@@ -3380,49 +3373,49 @@ Open Issues
- Gamecontroller setup under mac (Open 179 days)
+ Gamecontroller setup under mac (Open 180 days)
- Implement HID LampArray Support (Open 410 days)
+ Implement HID LampArray Support (Open 411 days)
- Support for zoom in/out (Open 629 days)
+ Support for zoom in/out (Open 630 days)
- Pico + keyboard + output to monochrome 20x4 LCD? (Open 729 days)
+ Pico + keyboard + output to monochrome 20x4 LCD? (Open 730 days)
- Examples using the keypad module for a keyboard and macros (Open 732 days)
+ Examples using the keypad module for a keyboard and macros (Open 733 days)
- USB Keyboard no longer sends keystrokes after windows machine go to sleep (Open 925 days)
+ USB Keyboard no longer sends keystrokes after windows machine go to sleep (Open 926 days)
- Double key in Discord shortcuts (Open 970 days)
+ Double key in Discord shortcuts (Open 971 days)
@@ -3436,14 +3429,14 @@ Open Issues
- super slow update on raspberry pi pico W (Open 315 days)
+ super slow update on raspberry pi pico W (Open 316 days)
- Memory issues even on some Express boards (Open 816 days)
+ Memory issues even on some Express boards (Open 817 days)
enhancement
@@ -3452,7 +3445,7 @@ Open Issues
- Keypad Functionality for HT16K33 Breakout (Open 1475 days)
+ Keypad Functionality for HT16K33 Breakout (Open 1476 days)
enhancement
@@ -3472,7 +3465,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -3496,28 +3489,28 @@ Open Issues
- HTTPS Server now works on ESP32-S3 but MemoryError on Pico W and ESP32-S2 (Open 268 days)
+ HTTPS Server now works on ESP32-S3 but MemoryError on Pico W and ESP32-S2 (Open 269 days)
- Airlift Support? (Open 269 days)
+ Airlift Support? (Open 270 days)
- Pico W need too much time for receiving request data in random cases (Open 591 days)
+ Pico W need too much time for receiving request data in random cases (Open 592 days)
- Connection refused after some time/multiple requests on Wiznet5k Pico W5100S (Open 623 days)
+ Connection refused after some time/multiple requests on Wiznet5k Pico W5100S (Open 624 days)
@@ -3535,7 +3528,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -3552,7 +3545,7 @@ Open Issues
- high humidity causes dead lock (Open 578 days)
+ high humidity causes dead lock (Open 579 days)
@@ -3570,7 +3563,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -3594,7 +3587,7 @@ Open Issues
- Update to HUE API V2 (Open 1098 days)
+ Update to HUE API V2 (Open 1099 days)
enhancement
@@ -3610,7 +3603,7 @@ Open Issues
- x, y coordinates are flipped compared to FT5336 touch screen and Arduino library (Open 345 days)
+ x, y coordinates are flipped compared to FT5336 touch screen and Arduino library (Open 346 days)
@@ -3626,7 +3619,7 @@ Open Issues
Wrong sensor units in gyro docstring (Open 5 days)
+ good-first-issue">Wrong sensor units in gyro docstring (Open 6 days)
documentation
@@ -3643,7 +3636,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -3660,7 +3653,7 @@ Open Issues
- Allow using different models together (Open 894 days)
+ Allow using different models together (Open 895 days)
bug
@@ -3671,7 +3664,7 @@ Open Issues
Missing Type Annotations (Open 1147 days)
+ hacktoberfest">Missing Type Annotations (Open 1148 days)
documentation
@@ -3691,14 +3684,14 @@ Open Issues
- Make examples compatible with both 8.x.x and 9.0.0 (Open 337 days)
+ Make examples compatible with both 8.x.x and 9.0.0 (Open 338 days)
- `__init__()` arguments are not Pin objects (Open 1028 days)
+ `__init__()` arguments are not Pin objects (Open 1029 days)
@@ -3714,7 +3707,7 @@ Open Issues
Readme.rst example usage section error (Open 160 days)
+ hacktoberfest">Readme.rst example usage section error (Open 161 days)
good first issue
@@ -3727,14 +3720,14 @@ Open Issues
- How to adapt ILI9341 to drive the ILI9488 ? #36 (Open 315 days)
+ How to adapt ILI9341 to drive the ILI9488 ? #36 (Open 316 days)
- Make it easy to set MADCTL for rotation (Open 1263 days)
+ Make it easy to set MADCTL for rotation (Open 1264 days)
@@ -3748,14 +3741,14 @@ Open Issues
- Feature Request: PNG Tilegrid Inflator (Open 106 days)
+ Feature Request: PNG Tilegrid Inflator (Open 107 days)
- Use Protocols for Type Annotations (Open 810 days)
+ Use Protocols for Type Annotations (Open 811 days)
documentation
@@ -3764,7 +3757,7 @@ Open Issues
- Add buffer option for storing bitmaps to prevent out memory due to fragmentation. (Open 1348 days)
+ Add buffer option for storing bitmaps to prevent out memory due to fragmentation. (Open 1349 days)
@@ -3778,7 +3771,7 @@ Open Issues
- RsapberryPi Install (Open 673 days)
+ RsapberryPi Install (Open 674 days)
@@ -3792,7 +3785,7 @@ Open Issues
- Installing the Library on my pi5 bookworm breaks my python GPIO calls (Open 142 days)
+ Installing the Library on my pi5 bookworm breaks my python GPIO calls (Open 143 days)
@@ -3806,49 +3799,49 @@ Open Issues
- Alternative decoding solution (Open 20 days)
+ Alternative decoding solution (Open 21 days)
- Philips Tv's RC5 (Open 72 days)
+ Philips Tv's RC5 (Open 73 days)
- Demo code in documentation of NonblockingGenericDecode does not work (Open 196 days)
+ Demo code in documentation of NonblockingGenericDecode does not work (Open 197 days)
- buffering issue with final NECRepeatIRMessage in NonblockingGenericDecode read method (Open 200 days)
+ buffering issue with final NECRepeatIRMessage in NonblockingGenericDecode read method (Open 201 days)
- GenericTransmit incorrect param types (Open 411 days)
+ GenericTransmit incorrect param types (Open 412 days)
- AttributeError: module 'pulseio' has no attribute 'PulseOut' (Open 575 days)
+ AttributeError: module 'pulseio' has no attribute 'PulseOut' (Open 576 days)
- Last value showing up divided by 2 (Open 1536 days)
+ Last value showing up divided by 2 (Open 1537 days)
bug
@@ -3857,7 +3850,7 @@ Open Issues
- Add feature to encode and decode MakeCode's infrared pulses (Open 1993 days)
+ Add feature to encode and decode MakeCode's infrared pulses (Open 1994 days)
enhancement
@@ -3873,7 +3866,7 @@ Open Issues
- Pimoroni LED shim class should be PixelBuf (Open 1685 days)
+ Pimoroni LED shim class should be PixelBuf (Open 1686 days)
enhancement
@@ -3889,14 +3882,14 @@ Open Issues
- Update Usage Example in README (Open 415 days)
+ Update Usage Example in README (Open 416 days)
- Two is31fl3741 boards in serial STEMMA crash on example code (Open 1134 days)
+ Two is31fl3741 boards in serial STEMMA crash on example code (Open 1135 days)
@@ -3910,14 +3903,14 @@ Open Issues
- Iterate through TransientObject items? (Open 171 days)
+ Iterate through TransientObject items? (Open 172 days)
- Odd (literally) issue with nested dictionaries from weather.gov API (Open 171 days)
+ Odd (literally) issue with nested dictionaries from weather.gov API (Open 172 days)
@@ -3935,7 +3928,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -3959,21 +3952,21 @@ Open Issues
- Add pack sizes for https://www.adafruit.com/product/5035 (Open 618 days)
+ Add pack sizes for https://www.adafruit.com/product/5035 (Open 619 days)
- Measuring battery voltage on a adafruit feather esp32-s3 tft fails in circuitpython (Open 778 days)
+ Measuring battery voltage on a adafruit feather esp32-s3 tft fails in circuitpython (Open 779 days)
- simpletest fails on Feather nRF52840. (Open 1483 days)
+ simpletest fails on Feather nRF52840. (Open 1484 days)
bug
@@ -3989,21 +3982,21 @@ Open Issues
- Changing rainbow period on the fly (Open 541 days)
+ Changing rainbow period on the fly (Open 542 days)
- Adafruit sparkle animation broken on RP2040, but RainbowSparkle and SparklePulse work? (Open 636 days)
+ Adafruit sparkle animation broken on RP2040, but RainbowSparkle and SparklePulse work? (Open 637 days)
- consider making keyword-only parameters for some animations (Open 663 days)
+ consider making keyword-only parameters for some animations (Open 664 days)
enhancement
@@ -4012,21 +4005,21 @@ Open Issues
- add_cycle_complete_receiver not supported for included animations (Open 859 days)
+ add_cycle_complete_receiver not supported for included animations (Open 860 days)
- Bug in RainbowComet when tail_length > 256 when step=0 (Open 962 days)
+ Bug in RainbowComet when tail_length > 256 when step=0 (Open 963 days)
- Nesting AnimateOnce inside AnimationSequence causes random animation order (Open 1049 days)
+ Nesting AnimateOnce inside AnimationSequence causes random animation order (Open 1050 days)
@@ -4035,7 +4028,7 @@ Open Issues
Missing Type Annotations (Open 1147 days)
+ hacktoberfest">Missing Type Annotations (Open 1148 days)
documentation
@@ -4048,21 +4041,21 @@ Open Issues
- Addressing multiple 8x8 panels (Open 1275 days)
+ Addressing multiple 8x8 panels (Open 1276 days)
- Updating brightness mid-animation (Open 1529 days)
+ Updating brightness mid-animation (Open 1530 days)
- Add min and max_intensity feature back to Pulse animation (Open 1609 days)
+ Add min and max_intensity feature back to Pulse animation (Open 1610 days)
enhancement
@@ -4071,7 +4064,7 @@ Open Issues
- Gradient Animation Request (Open 1619 days)
+ Gradient Animation Request (Open 1620 days)
enhancement
@@ -4080,7 +4073,7 @@ Open Issues
- Background color (or fade-to color) for Chase and Comet (Open 1625 days)
+ Background color (or fade-to color) for Chase and Comet (Open 1626 days)
enhancement
@@ -4089,7 +4082,7 @@ Open Issues
- Neighboring pixels feature (Open 1633 days)
+ Neighboring pixels feature (Open 1634 days)
enhancement
@@ -4109,7 +4102,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -4126,7 +4119,7 @@ Open Issues
- Measurement Faliure (Open 1346 days)
+ Measurement Faliure (Open 1347 days)
@@ -4144,7 +4137,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -4172,7 +4165,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -4189,7 +4182,7 @@ Open Issues
- Odd readings with H3LIS331 (Open 1343 days)
+ Odd readings with H3LIS331 (Open 1344 days)
@@ -4207,7 +4200,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -4224,7 +4217,7 @@ Open Issues
- Incorrect calculation in shake() method (Open 649 days)
+ Incorrect calculation in shake() method (Open 650 days)
@@ -4242,7 +4235,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -4259,7 +4252,7 @@ Open Issues
- Throttled Data Rate (Open 482 days)
+ Throttled Data Rate (Open 483 days)
@@ -4273,28 +4266,28 @@ Open Issues
- Writing to a file when flash is full. (Open 203 days)
+ Writing to a file when flash is full. (Open 204 days)
- Use of `adafruit_logging` Causes Pico W to Fail to Reload Circuitpython (Open 406 days)
+ Use of `adafruit_logging` Causes Pico W to Fail to Reload Circuitpython (Open 407 days)
- Logger Does Not Write to File on AdaLogger SD Card (Open 407 days)
+ Logger Does Not Write to File on AdaLogger SD Card (Open 408 days)
- add proper tests (Open 705 days)
+ add proper tests (Open 706 days)
@@ -4312,7 +4305,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -4340,7 +4333,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -4357,7 +4350,7 @@ Open Issues
- Negative temperature unsigned integer issue (Open 1427 days)
+ Negative temperature unsigned integer issue (Open 1428 days)
@@ -4375,7 +4368,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -4403,7 +4396,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -4431,7 +4424,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -4448,7 +4441,7 @@ Open Issues
- Misleading error message on WHO_AM_I ID check (Open 332 days)
+ Misleading error message on WHO_AM_I ID check (Open 333 days)
enhancement
@@ -4457,28 +4450,28 @@ Open Issues
- High pass filter not working for LSM6DSOX (Open 519 days)
+ High pass filter not working for LSM6DSOX (Open 520 days)
- LSM6DS032 "doubled" acceleration sensitivity (code matches datasheet but not test) (Open 530 days)
+ LSM6DS032 "doubled" acceleration sensitivity (code matches datasheet but not test) (Open 531 days)
- Wake on Significant Motion (Open 1006 days)
+ Wake on Significant Motion (Open 1007 days)
- Duplicate code in library files - potential refactor needed (Open 1354 days)
+ Duplicate code in library files - potential refactor needed (Open 1355 days)
enhancement
@@ -4487,14 +4480,14 @@ Open Issues
- Missing data read flag (Open 1415 days)
+ Missing data read flag (Open 1416 days)
- SPI support? (Open 1630 days)
+ SPI support? (Open 1631 days)
enhancement
@@ -4503,7 +4496,7 @@ Open Issues
- Memory Allocation issue on M0, others? (Open 1661 days)
+ Memory Allocation issue on M0, others? (Open 1662 days)
bug
@@ -4512,7 +4505,7 @@ Open Issues
- Add shake? (Open 1727 days)
+ Add shake? (Open 1728 days)
enhancement
@@ -4532,7 +4525,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -4551,7 +4544,7 @@ Open Issues
Missing Type Annotations (Open 1147 days)
+ documentation">Missing Type Annotations (Open 1148 days)
hacktoberfest
@@ -4575,7 +4568,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -4592,28 +4585,28 @@ Open Issues
- Temperature starting point estimation is off (Open 466 days)
+ Temperature starting point estimation is off (Open 467 days)
- Setting accel_range and gyro_scale (Open 1108 days)
+ Setting accel_range and gyro_scale (Open 1109 days)
- Sample rate for accelerometer? (Open 1446 days)
+ Sample rate for accelerometer? (Open 1447 days)
- Looking for burst data from LSM9DS1 (Open 1516 days)
+ Looking for burst data from LSM9DS1 (Open 1517 days)
@@ -4627,7 +4620,7 @@ Open Issues
- From raw to lux value (Open 46 days)
+ From raw to lux value (Open 47 days)
@@ -4638,7 +4631,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -4655,7 +4648,7 @@ Open Issues
- Add interrupt example (Open 751 days)
+ Add interrupt example (Open 752 days)
documentation
@@ -4671,7 +4664,7 @@ Open Issues
- Works fine on circuitpython but fails on micropython using blinka on Pico (Open 186 days)
+ Works fine on circuitpython but fails on micropython using blinka on Pico (Open 187 days)
@@ -4682,7 +4675,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -4706,21 +4699,21 @@ Open Issues
- Example for using the Keyboard or Mouse as a boot device (Open 352 days)
+ Example for using the Keyboard or Mouse as a boot device (Open 353 days)
- Device Crashes when Host Device goes to sleep/powers down (Open 1196 days)
+ Device Crashes when Host Device goes to sleep/powers down (Open 1197 days)
- Feature request: non-blocking play_file() (Open 1203 days)
+ Feature request: non-blocking play_file() (Open 1204 days)
@@ -4734,14 +4727,14 @@ Open Issues
- Add support for inverse diode direction (Open 145 days)
+ Add support for inverse diode direction (Open 146 days)
- Support external pull ups? (Open 863 days)
+ Support external pull ups? (Open 864 days)
@@ -4755,21 +4748,21 @@ Open Issues
- network ip_address doesnt work if using wifi_esp32s2 (Open 156 days)
+ network ip_address doesnt work if using wifi_esp32s2 (Open 157 days)
- Compatibility with 96x48 Waveshare Matrix (Open 341 days)
+ Compatibility with 96x48 Waveshare Matrix (Open 342 days)
- MatrixPortal : solution to refresh the clock every second (Open 980 days)
+ MatrixPortal : solution to refresh the clock every second (Open 981 days)
enhancement
@@ -4778,7 +4771,7 @@ Open Issues
- Missing Type Annotations (Open 1147 days)
+ Missing Type Annotations (Open 1148 days)
documentation
@@ -4798,7 +4791,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -4815,7 +4808,7 @@ Open Issues
- Lots of exceptions at high temperatures. (Open 674 days)
+ Lots of exceptions at high temperatures. (Open 675 days)
bug
@@ -4824,14 +4817,14 @@ Open Issues
- Library uses short argument names (Open 739 days)
+ Library uses short argument names (Open 740 days)
- Failure to read data yields a 0 instead of error or NoneType (Open 1326 days)
+ Failure to read data yields a 0 instead of error or NoneType (Open 1327 days)
@@ -4849,7 +4842,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -4866,14 +4859,14 @@ Open Issues
- raise errors (Open 354 days)
+ raise errors (Open 355 days)
- Library uses short argument names (Open 739 days)
+ Library uses short argument names (Open 740 days)
enhancement
@@ -4889,7 +4882,7 @@ Open Issues
- Raspberry pi 5, gpio problems. (Open 72 days)
+ Raspberry pi 5, gpio problems. (Open 73 days)
@@ -4900,7 +4893,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -4917,14 +4910,14 @@ Open Issues
- issues with using SPI1 on a RapsBerry Pi 4 Module B (Open 544 days)
+ issues with using SPI1 on a RapsBerry Pi 4 Module B (Open 545 days)
- Library uses short argument names (Open 739 days)
+ Library uses short argument names (Open 740 days)
enhancement
@@ -4933,7 +4926,7 @@ Open Issues
- Missing Type Annotations (Open 1147 days)
+ Missing Type Annotations (Open 1148 days)
documentation
@@ -4942,7 +4935,7 @@ Open Issues
- Example code not working (Open 1299 days)
+ Example code not working (Open 1300 days)
bug
@@ -4958,28 +4951,28 @@ Open Issues
- font5x8.bin (Open 295 days)
+ font5x8.bin (Open 296 days)
- Why is Adafruit MAX7219 Driver for 7 Segment Displays limited to Numeric Digits Only? (Open 619 days)
+ Why is Adafruit MAX7219 Driver for 7 Segment Displays limited to Numeric Digits Only? (Open 620 days)
- Library uses short argument names (Open 739 days)
+ Library uses short argument names (Open 740 days)
- Cascade several 7-segment display modules (Open 967 days)
+ Cascade several 7-segment display modules (Open 968 days)
enhancement
@@ -4995,42 +4988,42 @@ Open Issues
- How to read rotary encoders from i2C board? (Open 240 days)
+ How to read rotary encoders from i2C board? (Open 241 days)
- Datasheet Change Due To Issue Discovered In MCP23017 Chip (Open 388 days)
+ Datasheet Change Due To Issue Discovered In MCP23017 Chip (Open 389 days)
- MCP23018/MCP23S18 Support (Open 968 days)
+ MCP23018/MCP23S18 Support (Open 969 days)
- Library rename? (Open 969 days)
+ Library rename? (Open 970 days)
- Cannot freeze into custom firmware (Open 975 days)
+ Cannot freeze into custom firmware (Open 976 days)
- No Output (Open 1286 days)
+ No Output (Open 1287 days)
support
@@ -5039,7 +5032,7 @@ Open Issues
- interrupt-on-change feature by setting INTCON register not working (Open 1413 days)
+ interrupt-on-change feature by setting INTCON register not working (Open 1414 days)
@@ -5053,49 +5046,49 @@ Open Issues
- Unexpected Data Output from MCP2515 on Raspberry Pi 4 with Bookworm Lite (64-bit) (Open 91 days)
+ Unexpected Data Output from MCP2515 on Raspberry Pi 4 with Bookworm Lite (64-bit) (Open 92 days)
- Adding support for 12Mhz crystal oscillator in __init__.py (Open 93 days)
+ Adding support for 12Mhz crystal oscillator in __init__.py (Open 94 days)
- RuntimeError: No Masks Available (Open 396 days)
+ RuntimeError: No Masks Available (Open 397 days)
- Using only one mask produces a lot of print spam (Open 469 days)
+ Using only one mask produces a lot of print spam (Open 470 days)
- Must have another device read the bus. (Open 506 days)
+ Must have another device read the bus. (Open 507 days)
- Making full use of all hardware masks and filters (Open 592 days)
+ Making full use of all hardware masks and filters (Open 593 days)
- RuntimeError: Timeout setting Mode (Open 953 days)
+ RuntimeError: Timeout setting Mode (Open 954 days)
@@ -5104,7 +5097,7 @@ Open Issues
Missing Type Annotations (Open 1147 days)
+ hacktoberfest">Missing Type Annotations (Open 1148 days)
documentation
@@ -5117,21 +5110,21 @@ Open Issues
- Transmit buffer error (Open 1245 days)
+ Transmit buffer error (Open 1246 days)
- Not compatible with Circuitpython built w/o long support (Open 1419 days)
+ Not compatible with Circuitpython built w/o long support (Open 1420 days)
- Possible addition? (Open 1421 days)
+ Possible addition? (Open 1422 days)
help wanted
@@ -5147,28 +5140,28 @@ Open Issues
- Support for MCP32xx (Open 7 days)
+ Support for MCP32xx (Open 8 days)
- Allow SPI clock speed for the MCP ADC to be set (Open 51 days)
+ Allow SPI clock speed for the MCP ADC to be set (Open 52 days)
- How can I use this on an RPI 5? (Open 101 days)
+ How can I use this on an RPI 5? (Open 102 days)
- Please add MCP3208 support. (Open 667 days)
+ Please add MCP3208 support. (Open 668 days)
enhancement
@@ -5177,7 +5170,7 @@ Open Issues
- Library uses short argument names (Open 739 days)
+ Library uses short argument names (Open 740 days)
enhancement
@@ -5193,28 +5186,28 @@ Open Issues
- Allow setting and getting real voltages directly (Open 125 days)
+ Allow setting and getting real voltages directly (Open 126 days)
- reset method not working (Open 146 days)
+ reset method not working (Open 147 days)
- synchronous update via LDAC pin does not work (Open 626 days)
+ synchronous update via LDAC pin does not work (Open 627 days)
- Allow for synchrous DAC output (Open 634 days)
+ Allow for synchrous DAC output (Open 635 days)
enhancement
@@ -5223,7 +5216,7 @@ Open Issues
- Set I2C address bits via LDAC (Open 1367 days)
+ Set I2C address bits via LDAC (Open 1368 days)
enhancement
@@ -5243,7 +5236,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -5260,14 +5253,14 @@ Open Issues
- How to use MCP9600 on RPi Pico using micropython? (Open 249 days)
+ How to use MCP9600 on RPi Pico using micropython? (Open 250 days)
- Rename to MCP960x? (Open 922 days)
+ Rename to MCP960x? (Open 923 days)
@@ -5285,7 +5278,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -5309,28 +5302,28 @@ Open Issues
- Why is `send` always overwriting `MIDIMessage.channel`? (Open 282 days)
+ Why is `send` always overwriting `MIDIMessage.channel`? (Open 283 days)
- Is correct this modification for work in a raspberry Pi? (Open 428 days)
+ Is correct this modification for work in a raspberry Pi? (Open 429 days)
- ProgramChange does not work (Open 1223 days)
+ ProgramChange does not work (Open 1224 days)
- Add support for MIDI running status (Open 2060 days)
+ Add support for MIDI running status (Open 2061 days)
enhancement
@@ -5339,7 +5332,7 @@ Open Issues
- MIDI UART support (Open 2077 days)
+ MIDI UART support (Open 2078 days)
enhancement
@@ -5348,7 +5341,7 @@ Open Issues
- Work out best way to handle reading large SysEx messages (Open 2091 days)
+ Work out best way to handle reading large SysEx messages (Open 2092 days)
enhancement
@@ -5366,7 +5359,7 @@ Open Issues
Missing Type Annotations (Open 1147 days)
+ hacktoberfest">Missing Type Annotations (Open 1148 days)
documentation
@@ -5379,7 +5372,7 @@ Open Issues
- PyPortal Pynt ESP firmware update issue (Open 1297 days)
+ PyPortal Pynt ESP firmware update issue (Open 1298 days)
@@ -5393,98 +5386,98 @@ Open Issues
- Using adafruit_minimqtt with default networking (Open 179 days)
+ Using adafruit_minimqtt with default networking (Open 180 days)
- Errors with MQTT CircuitPython 9 Publish (Open 224 days)
+ Errors with MQTT CircuitPython 9 Publish (Open 225 days)
- get_monotonic_time doesn't preserve resolution (Open 241 days)
+ get_monotonic_time doesn't preserve resolution (Open 242 days)
- Is `_backwards_compatible_sock` flag still needed (Open 274 days)
+ Is `_backwards_compatible_sock` flag still needed (Open 275 days)
- MMQTTException vs partial reads on read timeout (Open 293 days)
+ MMQTTException vs partial reads on read timeout (Open 294 days)
- Loop crashes after successful connecting to HiveMQ (tls) (Open 331 days)
+ Loop crashes after successful connecting to HiveMQ (tls) (Open 332 days)
- client.loop if the MQTT Broker goes down the loop crashes with OSError: [Errno 104] ECONNRESET (Open 332 days)
+ client.loop if the MQTT Broker goes down the loop crashes with OSError: [Errno 104] ECONNRESET (Open 333 days)
- Recurring exception in loop() function (Open 421 days)
+ Recurring exception in loop() function (Open 422 days)
- behavior change, now I get timeouts on ping (Open 446 days)
+ behavior change, now I get timeouts on ping (Open 447 days)
- _wait_for_msg raises empty MMQTTException when using iotcentral_device to connect to IoT Central (Open 473 days)
+ _wait_for_msg raises empty MMQTTException when using iotcentral_device to connect to IoT Central (Open 474 days)
- Callback Functions' Parameters Usage (Open 505 days)
+ Callback Functions' Parameters Usage (Open 506 days)
- Wrong _sock_exact_recv implementation used when adafruit_esp32spi.adafruit_esp32spi_socket provided (Open 558 days)
+ Wrong _sock_exact_recv implementation used when adafruit_esp32spi.adafruit_esp32spi_socket provided (Open 559 days)
- MMQTTException Error Handling (Open 569 days)
+ MMQTTException Error Handling (Open 570 days)
- Enhance loop() to be more resilient (Open 586 days)
+ Enhance loop() to be more resilient (Open 587 days)
enhancement
@@ -5495,7 +5488,7 @@ Open Issues
asyncio support? (Open 608 days)
+ long-term">asyncio support? (Open 609 days)
invalid
@@ -5510,7 +5503,7 @@ Open Issues
remove the workaround for buggy recv_into() (Open 636 days)
+ waiting-for-new-circuitpython-release">remove the workaround for buggy recv_into() (Open 637 days)
bug
@@ -5523,7 +5516,7 @@ Open Issues
- _wait_for_msg() on CPython with TLS connection raises ssl.SSLWantReadError on timeout (Open 641 days)
+ _wait_for_msg() on CPython with TLS connection raises ssl.SSLWantReadError on timeout (Open 642 days)
bug
@@ -5532,7 +5525,7 @@ Open Issues
- consider setting default non zero value for timeout in loop() (Open 679 days)
+ consider setting default non zero value for timeout in loop() (Open 680 days)
bug
@@ -5541,7 +5534,7 @@ Open Issues
- MQTT loop() blocks script. Works fine with adafruit_io (Open 688 days)
+ MQTT loop() blocks script. Works fine with adafruit_io (Open 689 days)
bug
@@ -5550,7 +5543,7 @@ Open Issues
- Sometimes receiving single zero byte (Open 732 days)
+ Sometimes receiving single zero byte (Open 733 days)
bug
@@ -5559,7 +5552,7 @@ Open Issues
- Frequent errors in .loop calls with CircuitPython 8 (Open 774 days)
+ Frequent errors in .loop calls with CircuitPython 8 (Open 775 days)
bug
@@ -5568,7 +5561,7 @@ Open Issues
- Outdated documentation in second RTD location (Open 987 days)
+ Outdated documentation in second RTD location (Open 988 days)
documentation
@@ -5577,14 +5570,14 @@ Open Issues
- Getting trapped in publish? (Open 1299 days)
+ Getting trapped in publish? (Open 1300 days)
- Add test suite (Open 1383 days)
+ Add test suite (Open 1384 days)
enhancement
@@ -5593,7 +5586,7 @@ Open Issues
- ModuleNotFoundError: No module named 'adafruit_minimqtt' (Open 1457 days)
+ ModuleNotFoundError: No module named 'adafruit_minimqtt' (Open 1458 days)
needs-investigation
@@ -5611,7 +5604,7 @@ Open Issues
Missing Type Annotations (Open 1147 days)
+ hacktoberfest">Missing Type Annotations (Open 1148 days)
documentation
@@ -5635,7 +5628,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -5652,7 +5645,7 @@ Open Issues
- Adding exit mode before reset (Open 648 days)
+ Adding exit mode before reset (Open 649 days)
@@ -5670,7 +5663,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -5698,7 +5691,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -5722,35 +5715,35 @@ Open Issues
- OSError: [Errno 5] Input/output error with Metro M7 (Open 398 days)
+ OSError: [Errno 5] Input/output error with Metro M7 (Open 399 days)
- Unable to get pixels after some time until I reset program, using Raspberry Pi 3B+ (math domain error, More than 4 outlier pixels) (Open 699 days)
+ Unable to get pixels after some time until I reset program, using Raspberry Pi 3B+ (math domain error, More than 4 outlier pixels) (Open 700 days)
- OSError: [Errno 5] Input/output error in raspberry pi 4 (Open 726 days)
+ OSError: [Errno 5] Input/output error in raspberry pi 4 (Open 727 days)
- i2c.write_then_readinto slows down frame rate after running the library for a couple seconds at 64Hz (Open 766 days)
+ i2c.write_then_readinto slows down frame rate after running the library for a couple seconds at 64Hz (Open 767 days)
- Adafruit mlx90640_camtest.py example does a "black screen" in RPi4 (Open 1452 days)
+ Adafruit mlx90640_camtest.py example does a "black screen" in RPi4 (Open 1453 days)
@@ -5768,7 +5761,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -5796,7 +5789,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -5820,14 +5813,14 @@ Open Issues
- `kit.continuous_servo[1].throttle = None` doesn't work like `kit.servo[1].angle = None` (Open 535 days)
+ `kit.continuous_servo[1].throttle = None` doesn't work like `kit.servo[1].angle = None` (Open 536 days)
- Servo motors are not disabling/releasing after setting angle to None (Open 718 days)
+ Servo motors are not disabling/releasing after setting angle to None (Open 719 days)
@@ -5841,28 +5834,28 @@ Open Issues
- Jittery stepper (Open 164 days)
+ Jittery stepper (Open 165 days)
- Limiting maximum duty cycle to enable usage of stepper motors with lower voltage rating (Open 367 days)
+ Limiting maximum duty cycle to enable usage of stepper motors with lower voltage rating (Open 368 days)
- Running motors in parrallel (Open 491 days)
+ Running motors in parrallel (Open 492 days)
- Stepper Motor Speed Limitations (Open 1512 days)
+ Stepper Motor Speed Limitations (Open 1513 days)
@@ -5880,7 +5873,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -5897,7 +5890,7 @@ Open Issues
- Missing Type Annotations (Open 1147 days)
+ Missing Type Annotations (Open 1148 days)
documentation
@@ -5917,7 +5910,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -5934,14 +5927,14 @@ Open Issues
- OSError: [Errno 116] ETIMEDOUT on RPi PicoW (Open 526 days)
+ OSError: [Errno 116] ETIMEDOUT on RPi PicoW (Open 527 days)
- Missing Type Annotations (Open 1147 days)
+ Missing Type Annotations (Open 1148 days)
documentation
@@ -5961,7 +5954,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -5978,14 +5971,14 @@ Open Issues
- Stuck with RuntimeError: "Integrity Failure" after 2 hours of working perfectly (Open 1102 days)
+ Stuck with RuntimeError: "Integrity Failure" after 2 hours of working perfectly (Open 1103 days)
- Missing Type Annotations (Open 1147 days)
+ Missing Type Annotations (Open 1148 days)
documentation
@@ -6005,7 +5998,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -6022,35 +6015,35 @@ Open Issues
- MemoryError when loading module (Open 315 days)
+ MemoryError when loading module (Open 316 days)
- Failed to find MPU6050 but it's detected by i2cdetect (Open 621 days)
+ Failed to find MPU6050 but it's detected by i2cdetect (Open 622 days)
- How to qualify the bus, board.i2c() does not see bus 0 on Pi Model B (original board)? (Open 667 days)
+ How to qualify the bus, board.i2c() does not see bus 0 on Pi Model B (original board)? (Open 668 days)
- Orientation? Compass Heading? (Open 961 days)
+ Orientation? Compass Heading? (Open 962 days)
- Feature request: read from onboard DMP (Open 1270 days)
+ Feature request: read from onboard DMP (Open 1271 days)
enhancement
@@ -6070,7 +6063,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -6089,7 +6082,7 @@ Open Issues
Question about MS8607 Humidity Resolution Options (Open 687 days)
+ question">Question about MS8607 Humidity Resolution Options (Open 688 days)
bug
@@ -6102,7 +6095,7 @@ Open Issues
- Not working on small int boards (Open 1508 days)
+ Not working on small int boards (Open 1509 days)
@@ -6120,7 +6113,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -6137,7 +6130,7 @@ Open Issues
- Missing Type Annotations (Open 1147 days)
+ Missing Type Annotations (Open 1148 days)
documentation
@@ -6155,7 +6148,7 @@ Open Issues
How to enable interrupts (Open 821 days)
+ enhancement">How to enable interrupts (Open 822 days)
bug
@@ -6175,49 +6168,49 @@ Open Issues
- Raspberry pi 5 Cannot determine SOC peripheral base address (Open 121 days)
+ Raspberry pi 5 Cannot determine SOC peripheral base address (Open 122 days)
- using D21 on a Pi4 do not work correctly (Open 318 days)
+ using D21 on a Pi4 do not work correctly (Open 319 days)
- Lights not showing what they are supposed to (Open 387 days)
+ Lights not showing what they are supposed to (Open 388 days)
- Updating buffer slow (Open 563 days)
+ Updating buffer slow (Open 564 days)
- ROS2: memory leak (Open 575 days)
+ ROS2: memory leak (Open 576 days)
- Code breaks when using only 2 leds (Open 731 days)
+ Code breaks when using only 2 leds (Open 732 days)
- Show() Function Speed Pi Pico vs. Raspberry (takes twice the time in Pi4) (Open 775 days)
+ Show() Function Speed Pi Pico vs. Raspberry (takes twice the time in Pi4) (Open 776 days)
question
@@ -6226,42 +6219,42 @@ Open Issues
- Number of led in the strip really affect the speed. (Open 836 days)
+ Number of led in the strip really affect the speed. (Open 837 days)
- Neopixels stop responding after some time (Open 896 days)
+ Neopixels stop responding after some time (Open 897 days)
- Inverted signal? (Open 940 days)
+ Inverted signal? (Open 941 days)
- Breaking change somewhere in recent Raspberry Pi OS update (Open 1395 days)
+ Breaking change somewhere in recent Raspberry Pi OS update (Open 1396 days)
- Set pixels using slice with single color / multiple colors (Open 1446 days)
+ Set pixels using slice with single color / multiple colors (Open 1447 days)
- tuple rgb value reported to be slower than list (Open 1879 days)
+ tuple rgb value reported to be slower than list (Open 1880 days)
bug
@@ -6277,14 +6270,14 @@ Open Issues
- NeoPixel library not working on the Jetson Nano 4gb (Open 297 days)
+ NeoPixel library not working on the Jetson Nano 4gb (Open 298 days)
- Max 339 LED chain on Pi5 (Open 347 days)
+ Max 339 LED chain on Pi5 (Open 348 days)
@@ -6302,7 +6295,7 @@ Open Issues
good-first-issue
- hacktoberfest">Add some docs and examples on animations (other than comet) (Open 493 days)
+ hacktoberfest">Add some docs and examples on animations (other than comet) (Open 494 days)
enhancement
@@ -6319,7 +6312,7 @@ Open Issues
- Doc issue with num_strands parameter (Open 500 days)
+ Doc issue with num_strands parameter (Open 501 days)
documentation
@@ -6335,14 +6328,14 @@ Open Issues
- Timeout in Adafruit_seesaw when attempting to create NeoTrellis (Open 294 days)
+ Timeout in Adafruit_seesaw when attempting to create NeoTrellis (Open 295 days)
- Example code is broken 'object has no such attribute' (Open 675 days)
+ Example code is broken 'object has no such attribute' (Open 676 days)
@@ -6351,7 +6344,7 @@ Open Issues
Missing Type Annotations (Open 1147 days)
+ hacktoberfest">Missing Type Annotations (Open 1148 days)
documentation
@@ -6364,7 +6357,7 @@ Open Issues
- Interrupt not implemented for Python (Open 1321 days)
+ Interrupt not implemented for Python (Open 1322 days)
@@ -6378,28 +6371,28 @@ Open Issues
- OSError: [Errno 116] ETIMEDOUT while using the adafruit_ntp.py library (Open 31 days)
+ OSError: [Errno 116] ETIMEDOUT while using the adafruit_ntp.py library (Open 32 days)
- timeout and retry logic (Open 109 days)
+ timeout and retry logic (Open 110 days)
- OverflowError (Open 127 days)
+ OverflowError (Open 128 days)
- NTP fails after 4 seconds (Open 766 days)
+ NTP fails after 4 seconds (Open 767 days)
@@ -6413,7 +6406,7 @@ Open Issues
- Return acceleration as meter per second per second (Open 1454 days)
+ Return acceleration as meter per second per second (Open 1455 days)
@@ -6427,7 +6420,7 @@ Open Issues
- Checking compatibility with service_account (Open 1376 days)
+ Checking compatibility with service_account (Open 1377 days)
@@ -6441,14 +6434,14 @@ Open Issues
- code stuck on `cam.capture` (Open 428 days)
+ code stuck on `cam.capture` (Open 429 days)
- Speed up pixel clock for previews (Open 1131 days)
+ Speed up pixel clock for previews (Open 1132 days)
@@ -6457,7 +6450,7 @@ Open Issues
Missing Type Annotations (Open 1147 days)
+ hacktoberfest">Missing Type Annotations (Open 1148 days)
documentation
@@ -6470,7 +6463,7 @@ Open Issues
- Carry exposure over when switching from RGB to jpeg modes (Open 1217 days)
+ Carry exposure over when switching from RGB to jpeg modes (Open 1218 days)
@@ -6484,21 +6477,21 @@ Open Issues
- Pico Simple Test Not Working (Open 294 days)
+ Pico Simple Test Not Working (Open 295 days)
- Exposure value being set but cannot be printed (Open 340 days)
+ Exposure value being set but cannot be printed (Open 341 days)
- Quality setting limit check error? (Open 341 days)
+ Quality setting limit check error? (Open 342 days)
@@ -6511,7 +6504,7 @@ Open Issues
good-first-issue
- hacktoberfest">improve jpeg size estimate (Open 341 days)
+ hacktoberfest">improve jpeg size estimate (Open 342 days)
bug
@@ -6532,28 +6525,28 @@ Open Issues
- setting exposure_value=0 is not the same as initial settings (Open 1132 days)
+ setting exposure_value=0 is not the same as initial settings (Open 1133 days)
- night mode doesn't seem to work (Open 1132 days)
+ night mode doesn't seem to work (Open 1133 days)
- better jpeg maximum size estimate (Open 1137 days)
+ better jpeg maximum size estimate (Open 1138 days)
- Implement capture steps from appnote (Open 1137 days)
+ Implement capture steps from appnote (Open 1138 days)
enhancement
@@ -6569,14 +6562,14 @@ Open Issues
- _OV7670_init registers confusion (Open 53 days)
+ _OV7670_init registers confusion (Open 54 days)
- Speed up pixel clock for previews (Open 1131 days)
+ Speed up pixel clock for previews (Open 1132 days)
@@ -6590,28 +6583,28 @@ Open Issues
- Outdated tutorial? (Open 191 days)
+ Outdated tutorial? (Open 192 days)
- timing control not exposed (Open 201 days)
+ timing control not exposed (Open 202 days)
- Example not running on Raspberry Pi 5 (Open 249 days)
+ Example not running on Raspberry Pi 5 (Open 250 days)
- Is there a way to manually turn Pins on/off? (Open 257 days)
+ Is there a way to manually turn Pins on/off? (Open 258 days)
@@ -6625,7 +6618,7 @@ Open Issues
- Function PCD8544.pixel is four times slower than the old Adafruit-Nokia-LCD (Open 1049 days)
+ Function PCD8544.pixel is four times slower than the old Adafruit-Nokia-LCD (Open 1050 days)
@@ -6643,7 +6636,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -6671,7 +6664,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -6695,14 +6688,14 @@ Open Issues
- read_pin does not return a boolean (Open 383 days)
+ read_pin does not return a boolean (Open 384 days)
- Combine with adafruit_pcf8574 into a single implementation (Open 383 days)
+ Combine with adafruit_pcf8574 into a single implementation (Open 384 days)
@@ -6716,7 +6709,7 @@ Open Issues
- DAC disabled after reading values from ADC (Open 887 days)
+ DAC disabled after reading values from ADC (Open 888 days)
@@ -6734,7 +6727,7 @@ Open Issues
good-first-issue
- hacktoberfest">DisplayIO Example Wanted (Open 197 days)
+ hacktoberfest">DisplayIO Example Wanted (Open 198 days)
enhancement
@@ -6758,21 +6751,21 @@ Open Issues
- Support for PIO side_set Pin Direction (Open 62 days)
+ Support for PIO side_set Pin Direction (Open 63 days)
- label: instruction on one line (Open 764 days)
+ label: instruction on one line (Open 765 days)
- "set pins, ~ 0" is accepted, but should not be(?) (Open 942 days)
+ "set pins, ~ 0" is accepted, but should not be(?) (Open 943 days)
@@ -6786,7 +6779,7 @@ Open Issues
- Drawing methods do not take screen rotation into account (Open 166 days)
+ Drawing methods do not take screen rotation into account (Open 167 days)
@@ -6800,7 +6793,7 @@ Open Issues
- Setting the Raspberry pi pin (Open 559 days)
+ Setting the Raspberry pi pin (Open 560 days)
@@ -6814,7 +6807,7 @@ Open Issues
- RuntimeError: busio.UART not supported on this platform. Please use pyserial instead. (Open 706 days)
+ RuntimeError: busio.UART not supported on this platform. Please use pyserial instead. (Open 707 days)
@@ -6828,28 +6821,28 @@ Open Issues
- HEX printing to Console? (Open 166 days)
+ HEX printing to Console? (Open 167 days)
- RuntimeError: Invalid PM2.5 header (Open 832 days)
+ RuntimeError: Invalid PM2.5 header (Open 833 days)
- Install on Raspberry pi 3B+ running Manjaro linux fails (Open 1359 days)
+ Install on Raspberry pi 3B+ running Manjaro linux fails (Open 1360 days)
- UART fails to operate with PMS5003 (Open 1532 days)
+ UART fails to operate with PMS5003 (Open 1533 days)
bug
@@ -6865,14 +6858,14 @@ Open Issues
- Reading Encrypted card error (Open 664 days)
+ Reading Encrypted card error (Open 665 days)
- NTAG 424 (Open 675 days)
+ NTAG 424 (Open 676 days)
enhancement
@@ -6881,7 +6874,7 @@ Open Issues
- How can I make read_passive_target wait indefinitely until a tag becomes available? (Open 1505 days)
+ How can I make read_passive_target wait indefinitely until a tag becomes available? (Open 1506 days)
enhancement
@@ -6897,35 +6890,35 @@ Open Issues
- Occasionally calling get_strftime() results in an error with self._wifi.requests being NoneType (Open 550 days)
+ Occasionally calling get_strftime() results in an error with self._wifi.requests being NoneType (Open 551 days)
- PyPortal.get_local_time() calls incorrect IP/domain (Open 679 days)
+ PyPortal.get_local_time() calls incorrect IP/domain (Open 680 days)
- Optimizing PortalBase (Open 1004 days)
+ Optimizing PortalBase (Open 1005 days)
- Does this work with fake requests still? (Open 1043 days)
+ Does this work with fake requests still? (Open 1044 days)
- Thoughts on turning adafruit_bitmap_font / adafruit_fakerequests into a soft dependency? (Open 1106 days)
+ Thoughts on turning adafruit_bitmap_font / adafruit_fakerequests into a soft dependency? (Open 1107 days)
@@ -6934,7 +6927,7 @@ Open Issues
Missing Type Annotations (Open 1147 days)
+ hacktoberfest">Missing Type Annotations (Open 1148 days)
documentation
@@ -6947,7 +6940,7 @@ Open Issues
- MagTag Project Selector (Open 1341 days)
+ MagTag Project Selector (Open 1342 days)
@@ -6961,7 +6954,7 @@ Open Issues
- Add support for anchoring (Open 1366 days)
+ Add support for anchoring (Open 1367 days)
enhancement
@@ -6970,7 +6963,7 @@ Open Issues
- ProgressBar could use less memory, operate more efficiently (Open 1580 days)
+ ProgressBar could use less memory, operate more efficiently (Open 1581 days)
enhancement
@@ -6986,7 +6979,7 @@ Open Issues
- Installation fails (Open 97 days)
+ Installation fails (Open 98 days)
@@ -7000,14 +6993,14 @@ Open Issues
- Sensor Data (Open 642 days)
+ Sensor Data (Open 643 days)
- Code fails duplicate-code check, consider refactor (Open 880 days)
+ Code fails duplicate-code check, consider refactor (Open 881 days)
enhancement
@@ -7023,14 +7016,14 @@ Open Issues
- Add function to return last file name written (Open 245 days)
+ Add function to return last file name written (Open 246 days)
- framing masks (Open 306 days)
+ framing masks (Open 307 days)
enhancement
@@ -7039,7 +7032,7 @@ Open Issues
- Add custom file name to capture_jpeg() (Open 315 days)
+ Add custom file name to capture_jpeg() (Open 316 days)
enhancement
@@ -7048,7 +7041,7 @@ Open Issues
- Turn off debug output (Open 333 days)
+ Turn off debug output (Open 334 days)
@@ -7062,7 +7055,7 @@ Open Issues
- Allow resizing images to keep full image instead of cropping (Open 195 days)
+ Allow resizing images to keep full image instead of cropping (Open 196 days)
enhancement
@@ -7071,21 +7064,21 @@ Open Issues
- Replace .show() with .root_group = (Open 382 days)
+ Replace .show() with .root_group = (Open 383 days)
- Handle failure from image converter service or other HttpErrors in `wget()` (Open 420 days)
+ Handle failure from image converter service or other HttpErrors in `wget()` (Open 421 days)
- Feature request: Allow json_transforms prior to json_path or image_url_path usage. (Open 724 days)
+ Feature request: Allow json_transforms prior to json_path or image_url_path usage. (Open 725 days)
enhancement
@@ -7094,14 +7087,14 @@ Open Issues
- Set a single pixel (Open 759 days)
+ Set a single pixel (Open 760 days)
- Feature suggestion: allow new headers to be passed to PyPortal.fetch, just as a new URL can be (Open 828 days)
+ Feature suggestion: allow new headers to be passed to PyPortal.fetch, just as a new URL can be (Open 829 days)
enhancement
@@ -7110,14 +7103,14 @@ Open Issues
- PyPortal.set_caption() always adds a new caption with no way to remove older ones? (Open 880 days)
+ PyPortal.set_caption() always adds a new caption with no way to remove older ones? (Open 881 days)
- text_wrap passed to wrap_text_to_lines instead of text_maxlen (Open 1041 days)
+ text_wrap passed to wrap_text_to_lines instead of text_maxlen (Open 1042 days)
@@ -7126,7 +7119,7 @@ Open Issues
Missing Type Annotations (Open 1147 days)
+ hacktoberfest">Missing Type Annotations (Open 1148 days)
documentation
@@ -7139,7 +7132,7 @@ Open Issues
- PyPortal mqtt integration with UI example (Open 1293 days)
+ PyPortal mqtt integration with UI example (Open 1294 days)
@@ -7153,7 +7146,7 @@ Open Issues