diff --git a/examples/adafruitio_25_schedule_trigger/adafruitio_25_schedule_trigger.ino b/examples/adafruitio_25_schedule_trigger/adafruitio_25_schedule_trigger.ino
new file mode 100644
index 00000000..93f3ddbd
--- /dev/null
+++ b/examples/adafruitio_25_schedule_trigger/adafruitio_25_schedule_trigger.ino
@@ -0,0 +1,95 @@
+// Adafruit IO Schedule Trigger Example
+// Tutorial Link: https://learn.adafruit.com/adafruit-io-basics-scheduled-triggers/
+//
+// Adafruit invests time and resources providing this open source code.
+// Please support Adafruit and open source hardware by purchasing
+// products from Adafruit!
+//
+// Written by Brent Rubell for Adafruit Industries
+// Copyright (c) 2020 Adafruit Industries
+// Licensed under the MIT license.
+//
+// All text above must be included in any redistribution.
+
+/************************** Configuration ***********************************/
+
+// edit the config.h tab and enter your Adafruit IO credentials
+// and any additional configuration needed for WiFi, cellular,
+// or ethernet clients.
+#include "config.h"
+
+/************************ Example Starts Here *******************************/
+
+
+// Relay is connected to PyPortal's D3 connector
+#define RELAY_POWER_PIN 3
+
+// Set up the 'relay feed'
+AdafruitIO_Feed *relay = io.feed("relay");
+
+void setup() {
+
+  // start the serial connection
+  Serial.begin(115200);
+
+  // wait for serial monitor to open
+  while(! Serial);
+
+  Serial.print("Connecting to Adafruit IO");
+
+  // connect to io.adafruit.com
+  io.connect();
+
+  // set up a message handler for the 'relay' feed.
+  // the handleMessage function (defined below)
+  // will be called whenever a message is
+  // received from adafruit io
+  relay->onMessage(handleMessage);
+
+  // wait for a connection
+  while(io.status() < AIO_CONNECTED) {
+    Serial.print(".");
+    delay(500);
+  }
+
+  // we are connected
+  Serial.println();
+  Serial.println(io.statusText());
+
+  // Get the last known value from the feed
+  relay->get();
+
+}
+
+void loop() {
+
+  // io.run(); is required for all sketches.
+  // it should always be present at the top of your loop
+  // function. it keeps the client connected to
+  // io.adafruit.com, and processes any incoming data.
+  io.run();
+
+}
+
+// this function is called whenever an 'relay' feed message
+// is received from Adafruit IO. it was attached to
+// the 'relay' feed in the setup() function above.
+void handleMessage(AdafruitIO_Data *data) {
+
+  Serial.print("feed received new data <- ");
+  Serial.println(data->toChar());
+
+  // Check to see if the morning scheduled trigger has executed
+  if (strcmp(data->toChar(), "morning") == 0) {
+      Serial.println("Turning lights ON");
+      digitalWrite(RELAY_POWER_PIN, HIGH);
+  }
+  // Check to see if the evening scheduled trigger has executed
+  else if (strcmp(data->toChar(), "night") == 0) {
+      Serial.println("Turning lights OFF");
+      digitalWrite(RELAY_POWER_PIN, LOW);
+  }
+  else {
+      Serial.println("Unexpected data received from Adafruit IO");
+  }
+}
diff --git a/examples/adafruitio_25_schedule_trigger/config.h b/examples/adafruitio_25_schedule_trigger/config.h
new file mode 100644
index 00000000..7440cada
--- /dev/null
+++ b/examples/adafruitio_25_schedule_trigger/config.h
@@ -0,0 +1,67 @@
+/************************ Adafruit IO Config *******************************/
+
+// visit io.adafruit.com if you need to create an account,
+// or if you need your Adafruit IO key.
+#define IO_USERNAME "your_username"
+#define IO_KEY "your_key"
+
+/******************************* WIFI **************************************/
+
+// the AdafruitIO_WiFi client will work with the following boards:
+//   - HUZZAH ESP8266 Breakout -> https://www.adafruit.com/products/2471
+//   - Feather HUZZAH ESP8266 -> https://www.adafruit.com/products/2821
+//   - Feather HUZZAH ESP32 -> https://www.adafruit.com/product/3405
+//   - Feather M0 WiFi -> https://www.adafruit.com/products/3010
+//   - Feather WICED -> https://www.adafruit.com/products/3056
+//   - Adafruit PyPortal -> https://www.adafruit.com/product/4116
+//   - Adafruit Metro M4 Express AirLift Lite ->
+//   https://www.adafruit.com/product/4000
+//   - Adafruit AirLift Breakout -> https://www.adafruit.com/product/4201
+
+#define WIFI_SSID "your_ssid"
+#define WIFI_PASS "your_pass"
+
+// uncomment the following line if you are using airlift
+//#define USE_AIRLIFT
+
+// uncomment the following line if you are using winc1500
+// #define USE_WINC1500
+
+// comment out the following lines if you are using fona or ethernet
+#include "AdafruitIO_WiFi.h"
+
+#if defined(USE_AIRLIFT) || defined(ADAFRUIT_METRO_M4_AIRLIFT_LITE) ||         \
+    defined(ADAFRUIT_PYPORTAL)
+// Configure the pins used for the ESP32 connection
+#if !defined(SPIWIFI_SS) // if the wifi definition isnt in the board variant
+// Don't change the names of these #define's! they match the variant ones
+#define SPIWIFI SPI
+#define SPIWIFI_SS 10  // Chip select pin
+#define SPIWIFI_ACK 9  // a.k.a BUSY or READY pin
+#define ESP32_RESETN 6 // Reset pin
+#define ESP32_GPIO0 -1 // Not connected
+#endif
+AdafruitIO_WiFi io(IO_USERNAME, IO_KEY, WIFI_SSID, WIFI_PASS, SPIWIFI_SS,
+                   SPIWIFI_ACK, ESP32_RESETN, ESP32_GPIO0, &SPIWIFI);
+#else
+AdafruitIO_WiFi io(IO_USERNAME, IO_KEY, WIFI_SSID, WIFI_PASS);
+#endif
+/******************************* FONA **************************************/
+
+// the AdafruitIO_FONA client will work with the following boards:
+//   - Feather 32u4 FONA -> https://www.adafruit.com/product/3027
+
+// uncomment the following two lines for 32u4 FONA,
+// and comment out the AdafruitIO_WiFi client in the WIFI section
+// #include "AdafruitIO_FONA.h"
+// AdafruitIO_FONA io(IO_USERNAME, IO_KEY);
+
+/**************************** ETHERNET ************************************/
+
+// the AdafruitIO_Ethernet client will work with the following boards:
+//   - Ethernet FeatherWing -> https://www.adafruit.com/products/3201
+
+// uncomment the following two lines for ethernet,
+// and comment out the AdafruitIO_WiFi client in the WIFI section
+// #include "AdafruitIO_Ethernet.h"
+// AdafruitIO_Ethernet io(IO_USERNAME, IO_KEY);
\ No newline at end of file
diff --git a/library.properties b/library.properties
index e71740b7..d10fb01d 100644
--- a/library.properties
+++ b/library.properties
@@ -1,5 +1,5 @@
 name=Adafruit IO Arduino
-version=3.9.1
+version=4.0.0
 author=Adafruit
 maintainer=Adafruit <adafruitio@adafruit.com>
 sentence=Arduino library to access Adafruit IO.