Skip to content

Latest commit

 

History

History
94 lines (70 loc) · 5.14 KB

README.md

File metadata and controls

94 lines (70 loc) · 5.14 KB
Raw

Ux_Device_HID application description

This application provides an example of Azure RTOS USBX stack usage on NUCLEO-L4R5ZI board, it shows how to develop USB Device Human Interface "HID" mouse based application.

The application is designed to emulate an USB HID mouse device, the code provides all required device descriptors framework and associated Class descriptor report to build a compliant USB HID mouse device.

At the beginning ThreadX call the entry function tx_application_define(), at this stage, all USBx resources are initialized, the HID Class driver is registered and the application creates 2 threads with the same priorities :

  • app_ux_device_thread_entry (Prio : 10; PreemptionPrio : 10) used to initialize USB_OTG HAL PCD driver and start the device.
  • usbx_hid_thread_entry (Prio : 20; PreemptionPrio : 20) used to send HID reports to move automatically the PC host machine cursor. To customize the HID application by sending the mouse position step by step every 10ms. For each 10ms, the application calls the GetPointerData() API to update the mouse position (x, y) and send the report buffer through the ux_device_class_hid_event_set() API.

Expected success behavior

When plugged to PC host, the NUCLEO-L4R5ZI must be properly enumerated as an USB HID mouse device. During the enumeration phase, device provides host with the requested descriptors (Device, configuration, string). Those descriptors are used by host driver to identify the device capabilities. Once the NUCLEO-L4R5ZI USB device successfully completed the enumeration phase, the device sends a HID report after a user button press. Each report sent should move the mouse cursor by one step on host side.

Error behaviors

Host PC shows that USB device does not operate as designed (Mouse enumeration failed, the mouse pointer doesn't move).

Assumptions if any

User is familiar with USB 2.0 "Universal Serial BUS" Specification and HID class Specification.

Known limitations

The remote wakeup feature is not yet implemented (used to bring the USB suspended bus back to the active condition).

ThreadX usage hints

  • ThreadX uses the Systick as time base, thus it is mandatory that the HAL uses a separate time base through the TIM IPs.

  • ThreadX is configured with 100 ticks/sec by default, this should be taken into account when using delays or timeouts at application. It is always possible to reconfigure it in the "tx_user.h", the "TX_TIMER_TICKS_PER_SECOND" define,but this should be reflected in "tx_initialize_low_level.S" file too.

  • ThreadX is disabling all interrupts during kernel start-up to avoid any unexpected behavior, therefore all system related calls (HAL, BSP) should be done either at the beginning of the application or inside the thread entry functions.

  • ThreadX offers the "tx_application_define()" function, that is automatically called by the tx_kernel_enter() API. It is highly recommended to use it to create all applications ThreadX related resources (threads, semaphores, memory pools...) but it should not in any way contain a system API call (HAL or BSP).

  • Using dynamic memory allocation requires to apply some changes to the linker file. ThreadX needs to pass a pointer to the first free memory location in RAM to the tx_application_define() function, using the "first_unused_memory" argument. This require changes in the linker files to expose this memory location.

    • For EWARM add the following section into the .icf file:
    place in RAM_region    { last section FREE_MEM };
    • For MDK-ARM:
    either define the RW_IRAM1 region in the ".sct" file
or modify the line below in "tx_initialize_low_level.S to match the memory region being used
    LDR r1, =|Image$$RW_IRAM1$$ZI$$Limit|
    • For STM32CubeIDE add the following section into the .ld file:
    ._threadx_heap :
  {
     . = ALIGN(8);
     __RAM_segment_used_end__ = .;
     . = . + 64K;
     . = ALIGN(8);
   } >RAM_D1 AT> RAM_D1

    The simplest way to provide memory for ThreadX is to define a new section, see ._threadx_heap above.
In the example above the ThreadX heap size is set to 64KBytes.
The ._threadx_heap must be located between the .bss and the ._user_heap_stack sections in the linker script.
Caution: Make sure that ThreadX does not need more than the provided heap memory (64KBytes in this example).
Read more in STM32CubeIDE User Guide, chapter: "Linker script".
    • The "tx_initialize_low_level.S" should be also modified to enable the "USE_DYNAMIC_MEMORY_ALLOCATION" flag.

Keywords

RTOS, ThreadX, USBXDevice, USB_OTG, Full Speed, HID, Mouse,

Hardware and Software environment

  • This example runs on STM32L4R5xx devices.
  • This example has been tested with STMicroelectronics NUCLEO-L4R5ZI boards Revision MB1312 A-01 and can be easily tailored to any other supported device and development board.

How to use it ?

In order to make the program work, you must do the following :

  • Open your preferred toolchain
  • Rebuild all files and load your image into target memory
  • Run the application