You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I managed to create a second interface through bridging.
The output of ip a is
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master br0 state UP group default qlen 1000
link/ether 00:50:56:86:27:58 brd ff:ff:ff:ff:ff:ff
3: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 00:50:56:86:27:58 brd ff:ff:ff:ff:ff:ff
inet 10.201.0.169/24 brd 10.201.0.255 scope global dynamic br0
valid_lft 596sec preferred_lft 596sec
inet6 fe80::250:56ff:fe86:2758/64 scope link
valid_lft forever preferred_lft forever
4: ensUPF: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master br0 state UNKNOWN group default qlen 1000
link/ether 52:fc:a9:66:b8:03 brd ff:ff:ff:ff:ff:ff
While the output of the route -n is:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 10.201.0.254 0.0.0.0 UG 100 0 0 br0
10.201.0.0 0.0.0.0 255.255.255.0 U 0 0 0 br0
10.201.0.254 0.0.0.0 255.255.255.255 UH 100 0 0 br0
Also, I attach the netplan configuration file I have applied
Could someone let me know if the above network configuration would fit to use:
interface ens160 for n2, n3, n4, n9 networks
interface ensUPF for the n6 network?
reacted with thumbs up emoji reacted with thumbs down emoji reacted with laugh emoji reacted with hooray emoji reacted with confused emoji reacted with heart emoji reacted with rocket emoji reacted with eyes emoji
-
Hello, I am preparing my setup to build and run towards5gs-helm in Kubernetes.
I have deployed with terraform a VM in vsphere with Ubuntu 20.04 and kernel 5.4.0-122-generic
With ip a I could see only the lo and ens160 interfaces.
As per guidelines of https://github.com/Orange-OpenSource/towards5gs-helm/tree/main/charts/free5gc
I need two network interfaces.
I managed to create a second interface through bridging.
The output of ip a is
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master br0 state UP group default qlen 1000
link/ether 00:50:56:86:27:58 brd ff:ff:ff:ff:ff:ff
3: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 00:50:56:86:27:58 brd ff:ff:ff:ff:ff:ff
inet 10.201.0.169/24 brd 10.201.0.255 scope global dynamic br0
valid_lft 596sec preferred_lft 596sec
inet6 fe80::250:56ff:fe86:2758/64 scope link
valid_lft forever preferred_lft forever
4: ensUPF: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master br0 state UNKNOWN group default qlen 1000
link/ether 52:fc:a9:66:b8:03 brd ff:ff:ff:ff:ff:ff
While the output of the route -n is:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 10.201.0.254 0.0.0.0 UG 100 0 0 br0
10.201.0.0 0.0.0.0 255.255.255.0 U 0 0 0 br0
10.201.0.254 0.0.0.0 255.255.255.255 UH 100 0 0 br0
Also, I attach the netplan configuration file I have applied
Could someone let me know if the above network configuration would fit to use:
interface ens160 for n2, n3, n4, n9 networks
interface ensUPF for the n6 network?
Beta Was this translation helpful? Give feedback.
All reactions