Skip to content

Latest commit

 

History

History
92 lines (61 loc) · 3.19 KB

INSTALL.Debian.md

File metadata and controls

92 lines (61 loc) · 3.19 KB

How to Build Debian Packages for Open vSwitch

This document describes how to build Debian packages for Open vSwitch. To install Open vSwitch on Debian without building Debian packages, see INSTALL.md instead.

These instructions should also work on Ubuntu and other Debian derivative distributions.

Before You Begin

Before you begin, consider whether you really need to build packages yourself. Debian "wheezy" and "sid", as well as recent versions of Ubuntu, contain pre-built Debian packages for Open vSwitch. It is easier to install these than to build your own. To use packages from your distribution, skip ahead to "Installing .deb Packages", below.

Building Open vSwitch Debian packages

You may build from an Open vSwitch distribution tarball or from an Open vSwitch Git tree with these instructions.

You do not need to be the superuser to build the Debian packages.

  1. Install the "build-essential" and "fakeroot" packages, e.g. with apt-get install build-essential fakeroot.

  2. Obtain and unpack an Open vSwitch source distribution and cd into its top level directory.

  3. Install the build dependencies listed under "Build-Depends:" near the top of debian/control. You can install these any way you like, e.g. with apt-get install.

    Check your work by running dpkg-checkbuilddeps in the top level of your ovs directory. If you've installed all the dependencies properly, dpkg-checkbuilddeps will exit without printing anything. If you forgot to install some dependencies, it will tell you which ones.

  4. Run:

    `fakeroot debian/rules binary`
    

    This will do a serial build that runs the unit tests. This will take approximately 8 to 10 minutes. If you prefer, you can run a faster parallel build, e.g.:

    `DEB_BUILD_OPTIONS='parallel=8' fakeroot debian/rules binary`
    

    If you are in a big hurry, you can even skip the unit tests:

    `DEB_BUILD_OPTIONS='parallel=8 nocheck' fakeroot debian/rules binary`
    
  5. The generated .deb files will be in the parent directory of the Open vSwitch source distribution.

Installing .deb Packages

These instructions apply to installing from Debian packages that you built yourself, as described in the previous section, or from packages provided by Debian or a Debian derivative distribution such as Ubuntu. In the former case, use a command such as dpkg -i to install the .deb files that you build, and in the latter case use a program such as apt-get or aptitude to download and install the provided packages.

You must be superuser to install Debian packages.

  1. Start by installing an Open vSwitch kernel module. See debian/openvswitch-switch.README.Debian for the available options.

  2. Install the "openvswitch-switch" and "openvswitch-common" packages. These packages include the core userspace components of the switch.

Open vSwitch .deb packages not mentioned above are rarely useful. Please refer to their individual package descriptions to find out whether any of them are useful to you.

Bug Reporting

Please report problems to [email protected].