Z-Stack_3.x.0 coordinator 20240710

coordinator/Z-Stack_3.x.0/CHANGELOG.md

@@ -1,70 +1,90 @@
+# 20240710
+
+- Fixed firmware instability issues introduced in the 20230507 firmware
+- Fix `NWK_TABLE_FULL` errors
+- SimpleLink SDK 7.41.00.17
+
 # 20230507
+
 - Enable child aging to fix issues like [#13478](https://github.com/Koenkk/zigbee2mqtt/issues/13478) (but not for older Xiaomi devices as they do not implement child aging correctly which gets them kicked out of the network)
 - Increase message timeout from 7 to 8 seconds to increase message delivery success rate for devices using a 7.5 seconds poll interval ([#13478](https://github.com/Koenkk/zigbee2mqtt/issues/13478#issuecomment-1501188485))
 - Improve performance with larger network
-    - Optimize table sizes
-    - Increase `stack_size` from `1024` to `8192`
+  - Optimize table sizes
+  - Increase `stack_size` from `1024` to `8192`
 - Add firmware for CC1352P7 and CC2652R7
 - SimpleLink SDK 7.10.00.98
 
 # 20221226
+
 - Improve performance/reliability for larger network (100+ devices)
 - Increase request retry attempts
 - Increase routing table sizes
 - SimpleLink SDK 6.10.01.01 ([changelog](https://software-dl.ti.com/simplelink/esd/simplelink_cc13xx_cc26xx_sdk/6.10.01.01/exports/changelog.html))
 
 # 20220219
+
 - Fix Touchlink crash
 - SimpleLink SDK 5.40.00.40 ([changelog](https://software-dl.ti.com/simplelink/esd/simplelink_cc13xx_cc26xx_sdk/5.40.00.40/exports/changelog.html))
 
 # 20211217
+
 - SimpleLink SDK 5.30.01.01 ([changelog](https://software-dl.ti.com/simplelink/esd/simplelink_cc13xx_cc26xx_sdk/5.30.01.01/exports/changelog.html))
 - Increase memory heap
 - Turn on/off leds when joining is enabled/disabled
 - Fix Xiaomi E1 devices not (fully) working
 - Allow setting transmit power for CC2652P/CC1352P greater than 5dBm (max 20dBm), default transmit power is set to 9dBm
 
 # 20210708
+
 - SimpleLink SDK 5.10.00.48 ([changelog](http://software-dl.ti.com/simplelink/esd/simplelink_cc13x2_26x2_sdk/5.10.00.48/exports/changelog.html))
 - Increase MAC buffers, increases performance on message burst and reduces MAC_TRANSACTION_OVERFLOW errors
 - LED control
 - Fix joining not working when joining is only permitted on specific router
 - Forward message to host even when profileID does not match
 
 # 20210120
+
 - Optimize network parameters (according to https://www.ti.com/lit/an/swra650b/swra650b.pdf)
 - Change default CC2652R/CC2652RB/CC1352P-2/CC2652P transmit power from 0dBm to 5dBm
 - Potential fix for Hue end devices disconnecting
 - SimpleLink SDK 4.40.00.44 ([changelog](http://software-dl.ti.com/simplelink/esd/simplelink_cc13x2_26x2_sdk/4.40.00.44/exports/changelog.html))
 
 # 20201026
+
 - SimpleLink SDK 4.30.00.54 ([changelog](http://software-dl.ti.com/simplelink/esd/simplelink_cc13x2_26x2_sdk/4.30.00.54/exports/changelog.html))
 - Expose `AssocAdd` function
 
 # 20200925
+
 - SimpleLink SDK 4.20.01.04 ([changelog](http://software-dl.ti.com/simplelink/esd/simplelink_cc13x2_26x2_sdk/4.20.01.04/exports/changelog.html))
 - Allow support for Samsung SmartThings PGC410EU presence sensor ([link](https://github.com/Koenkk/zigbee2mqtt/issues/4055))
 - Fix commands to long sleeping end devices failing when directly connected to coordinator (e.g. Xiaomi JTYJ-GD-01LM/BW)
 
 # 20200805
+
 - Expose `AssocRemove` function
 - SimpleLink SDK 4.20.00.35 ([changelog](http://software-dl.ti.com/simplelink/esd/simplelink_cc13x2_26x2_sdk/4.20.00.35/exports/changelog.html))
 
 # 20200417
+
 - SimpleLink SDK 4.10.00.78 ([changelog](http://software-dl.ti.com/simplelink/esd/simplelink_cc13x2_26x2_sdk/4.10.00.78/exports/changelog.html)) (+ SimpleLink SDK 3.40.00.02 ([changelog](http://software-dl.ti.com/simplelink/esd/simplelink_cc13x2_26x2_sdk/3.40.00.02/exports/changelog.html)))
 - Remove and rediscover route on source route failure (should fix issues with e.g. Hue enddevices dropping off) ([more info](https://e2e.ti.com/support/wireless-connectivity/zigbee-and-thread/f/158/t/883629))
 - Fix devices not able to reconnect when attempt unsecured rejoin ([more info](https://e2e.ti.com/support/wireless-connectivity/zigbee-and-thread/f/158/p/882650/3265311))
 - Enable parent announce, fixes devices not reachable when changing parents while coordinator is down.
 
 # 20191106
+
 - Increase max number of Zigbee 3.0 devices that can join to 200
 
 # 20191015
+
 - Increased group command buffer
 
 # 20191010
+
 - Update to `SIMPLELINK-CC13X2-26X2-SDK_3.30.00.03`
 - Add CC1352P_2 firmware
 
 # 20190426
-- Initial version.
+
+- Initial version.

coordinator/Z-Stack_3.x.0/COMPILE.md

@@ -1,27 +1,37 @@
 # Compiling the firmware
 
 ## Setup development environment
-1. Download and install [simplelink_cc13xx_cc26xx_sdk_7_10_00_98](https://www.ti.com/tool/SIMPLELINK-CC13XX-CC26XX-SDK#downloads)
-1. Download and install [Code Composer Studio 12.3.0.00005](http://www.ti.com/tool/CCSTUDIO)
+
+1. Download and install [SIMPLELINK-LOWPOWER-F2-SDK 7.41.00.17](https://www.ti.com/tool/download/SIMPLELINK-LOWPOWER-F2-SDK/7.41.00.17)
+1. Download and install [Code Composer Studio 12.6.0](https://www.ti.com/tool/download/CCSTUDIO/12.6.0)
 
 ## Compiling
-1. Create a folder called `workspace` in the folder where the SDK is installed. In the SDK installation folder you should see files like `Makefile` and `license_simplelink_cc13xx_cc26xx_sdk_7_10_00_98.txt`.
+
+1. Create a folder called `workspace` in the folder where the SDK is installed. In the SDK installation folder you should see files like `Makefile` and `license_simplelink_cc13xx_cc26xx_sdk_7_41_00_17.txt`.
 1. Start Code Composer Studio, it will ask you to select a workspace folder, select the `workspace` folder you created in the previous step.
-1. Go to *File -> Import -> Code Composer Studio -> CCS Projects -> Select* search-directory: `simplelink_cc13xx_cc26xx_sdk_7_10_00_98/examples/rtos`.
+1. Go to _File -> Import -> Code Composer Studio -> CCS Projects -> Select_ search-directory: `simplelink_cc13xx_cc26xx_sdk_7_41_00_17/examples/rtos`.
 1. Select:
-    - `znp_CC1352P_2_LAUNCHXL_tirtos7_ticlang`
-    - `znp_CC26X2R1_LAUNCHXL_tirtos7_ticlang`
-    - `znp_LP_CC1352P7_4_tirtos7_ticlang`
-    - `znp_LP_CC2652R7_tirtos7_ticlang`
-    - `znp_LP_CC2652RB_tirtos7_ticlang`
-1. Press *Finish*.
+   - `znp_CC1352P_2_LAUNCHXL_tirtos7_ticlang`
+   - `znp_CC26X2R1_LAUNCHXL_tirtos7_ticlang`
+   - `znp_LP_CC1352P7_4_tirtos7_ticlang`
+   - `znp_LP_CC2652R7_tirtos7_ticlang`
+   - `znp_LP_CC2652RB_tirtos7_ticlang`
+1. Press _Finish_.
 1. In Code Composer Studio, expand the 5 projects and for each open `znp.syscfg`, expand `Power Management` and change `Minimal Poll Period (ms)` to `1000`, change it back to `100` immediately and save the file.
 1. Copy `firmware.patch` to the SDK installation folder, open a Git Bash in this folder and apply the patch using `git apply firmware.patch --ignore-space-change`.
-1. Build the 5 projects; right click -> *Build project*.
-    - **Important:** by default the **launchpad** variant of the CC1352P2_CC2652P (= `znp_CC1352P_2_LAUNCHXL_tirtos7_ticlang`) is build. To build the **other** variant comment `#define LAUNCHPAD_CONFIG 1` in `preinclude.h` (located under `Stack/Config/`), don't forget to save.
+1. Build the 5 projects; right click -> _Build project_.
+   - **Important:** by default the **launchpad** variant of the CC1352P2_CC2652P (= `znp_CC1352P_2_LAUNCHXL_tirtos7_ticlang`) is build. To build the **other** variant comment `#define LAUNCHPAD_CONFIG 1` in `preinclude.h` (located under `Stack/Config/`), don't forget to save.
 1. Once finished, the firmware can be found under `znp_*_tirtos7_ticlang/default/znp_*_tirtos7_ticlang.hex`
-    - `znp_CC1352P_2_LAUNCHXL_tirtos7_ticlang.hex` -> CC1352P-2 and CC2652P based boards
-    - `znp_CC26X2R1_LAUNCHXL_tirtos7_ticlang.hex` -> CC2652R based boards
-    - `znp_LP_CC1352P7_4_tirtos7_ticlang.hex` -> CC1352P7 based boards
-    - `znp_LP_CC2652R7_tirtos7_ticlang.hex` -> CC2652R7 based boards
-    - `znp_LP_CC2652RB_tirtos7_ticlang.hex` -> CC2652RB based boards
+   - `znp_CC1352P_2_LAUNCHXL_tirtos7_ticlang.hex` -> CC1352P-2 and CC2652P based boards
+   - `znp_CC26X2R1_LAUNCHXL_tirtos7_ticlang.hex` -> CC2652R based boards
+   - `znp_LP_CC1352P7_4_tirtos7_ticlang.hex` -> CC1352P7 based boards
+   - `znp_LP_CC2652R7_tirtos7_ticlang.hex` -> CC2652R7 based boards
+   - `znp_LP_CC2652RB_tirtos7_ticlang.hex` -> CC2652RB based boards
+
+## Binary `maclib_*.a` changes in `firmware.patch`
+
+Note that the `firmware.patch` patches the binary `maclib_*.a` files.
+These changes are required to fix the coordinator crashing when the TX power is set to 5+.
+In SDK 7.10.02.23 TI made changes to `macSetTxPowerVal` which introduced this issue.
+The patch reverts these changes.
+The patched `maclib_*.a` files were provided by a TI employee and will only work for the 7.41.00.17 SDK.