Skip to content

Latest commit

 

History

History
17 lines (17 loc) · 1001 Bytes

README.md

File metadata and controls

17 lines (17 loc) · 1001 Bytes
Raw

Bekant PCB Schematic

Instructions

  • set up Rasperry Pi Pico environment as described here
  • prepare Bekant PCB as described here
  • install firmware onto Raspberry Pi Pico
    • mkdir build
    • cd build
    • cmake ..
    • make
    • boot Rasperry Pi Pico in storage mode and copy main.uf2 onto it
  • create & connect circuit board as in schematic.png
    • TP1 LIN corresponds to the TP1 header on the Bekant PCB
    • H5 and H6 corresponds to the 5th and 6th header pin on the Bekant PCB as in bekant_pcb.jpg
  • a long press on BUTTON_UP / BUTTON_DOWN will manually move the desk up / down
  • a short press on BUTTON_UP / BUTTON_DOWN will move the desk to the pre-defined POSITION_STAND / POSITION_SIT
  • the desk will also report its height (as reported on the LIN bus and converted to millimeters) over the USB serial interface