| description |
|---|
This document helps you to create a condition for events |
HyperDbg supports the creation of conditional events. Each event has one condition and can have multiple actions.
An unconditional event is an event that all its actions will be executed without any condition. This document is a brief on how to create a conditional event.
Each command in HyperDbg that are tagged as an "event" in the document follows the same structure described here. At the time you execute a command, you can add a condition { xx xx xx xx } where xx is the assembly (hex) of what you want to be executed in the case of that event.
Starting from v0.10, HyperDbg supports direct assembly code in the condition section. You can add asm condition { asm1; asm2; asm3; asm4} where you can add any assembly code to be executed in the case of that event.
For example, let's imagine we want to create a condition for a command like "!epthook".
When you execute the command like :
HyperDbg> !epthook fffff801deadbeefthen it is unconditional, but when you execute a command like this:
HyperDbg> !epthook fffff801deadbeef condition { 90 90 90 90 }or a command like this:
HyperDbg> !epthook fffff801deadbeef asm condition { nop; nop; nop; nop; }
then it is a conditional command.
{% hint style="success" %} Note that you can use all of the events in the same way (instead of !epthook). For example, you can use !syscall, !sysret, !epthook2, !ioin, etc. {% endhint %}
typedef UINT64
DebuggerCheckForCondition(PGUEST_REGS Regs, PVOID Context);Conditions will be executed like the above function so that you can expect a pointer to target debuggee's general-purpose registers on rcx and a Context in rdx.
The structure for general-purpose registers is :
typedef struct _GUEST_REGS
{
ULONG64 rax; // 0x00
ULONG64 rcx; // 0x08
ULONG64 rdx; // 0x10
ULONG64 rbx; // 0x18
ULONG64 rsp; // 0x20
ULONG64 rbp; // 0x28
ULONG64 rsi; // 0x30
ULONG64 rdi; // 0x38
ULONG64 r8; // 0x40
ULONG64 r9; // 0x48
ULONG64 r10; // 0x50
ULONG64 r11; // 0x58
ULONG64 r12; // 0x60
ULONG64 r13; // 0x68
ULONG64 r14; // 0x70
ULONG64 r15; // 0x78
} GUEST_REGS, *PGUEST_REGS;The Context is a special variable that shows an essential parameter of an event. This value is different for each event. You should check the documentation of that command for more information about the Context. For example, Context for !syscall command is the syscall-number or for the !epthook2 command is the physical address of where the hidden hook triggered.
Imagine we want to check for the name of the process, so only if the name contains the "svchost.exe" then triggers the event's action(s).
We all know that you can search for the name of the process in its _EPROCESS.
For example, ImageFileName in _EPROCESS contains the 15 characters of the process name. It is not where Windows shows the name in Task Manager but checking this value is enough.
The following assembly code gets the current _KTHREAD from _KPCR. From there, we can find the address of _KPROCESS, and this structure is located at the start address of _EPROCESS.
As you can see from the above picture, ImageFileName is located at +0x450 after the _EPROCESS.
So our final assembly code is like this :
{% hint style="warning" %}
The offsets of _EPROCESSand other structures might change in the different versions of Windows.
{% endhint %}
Now we should assemble the above code into its hex representation in the assembly. For example, you can use an online assembler.
Keep in mind that if you return with rax=0 or null then it means false, and if you return anything other than zero (for example rax=1) then it means true.
If you return true, then all the actions of that event will be executed, and if you return false, then HyperDbg ignores the actions of that event.
The final result of the assembler is :
0: 65 48 8b 04 25 88 01 mov rax,QWORD PTR gs:0x188
7: 00 00
9: 48 8b 80 b8 00 00 00 mov rax,QWORD PTR [rax+0xb8]
10: 48 8b 80 50 04 00 00 mov rax,QWORD PTR [rax+0x450]
17: 48 b9 73 76 63 68 6f movabs rcx,0x2e74736f68637673
1e: 73 74 2e
21: 48 39 c8 cmp rax,rcx
24: 74 05 je 2b <ReturnTrue>
26: 48 31 c0 xor rax,rax
29: eb 07 jmp 32 <Return>
000000000000002b <ReturnTrue>:
2b: 48 c7 c0 01 00 00 00 mov rax,0x1
0000000000000032 <Return>:
32: c3 retNow you can call the command with the following arguments :
HyperDbg> !epthook fffff801deadbeef condition {65488B042588010000488B80B8000000488B805004000048B9737663686F73742E4839C874054831C0EB0748C7C001000000C3}or
HyperDbg> !syscall condition {65488B042588010000488B80B8000000488B805004000048B9737663686F73742E4839C874054831C0EB0748C7C001000000C3}We automatically add a 0xc3 or ret the opcode to the end of the condition assembly, and in the case if you forget to return the control of the processor back to the HyperDbg, then there is no problem. Make sure to not jump to another address without returning back to the HyperDbg. Otherwise, it causes a crash on your system.
Sometimes we need to read the registers and decide based on them. For example, let's imagine we want to hook ExAllocatePoolWithTag and if the size of the requested buffer is xx then perform the actions.
This function (ExAllocatePoolWithTag) is defined like this :
PVOID ExAllocatePoolWithTag(
POOL_TYPE PoolType,
SIZE_T NumberOfBytes,
ULONG Tag
);It's obvious that based on the x64 fastcall calling convention in Windows, PoolType is on rcx, NumberOfBytes is on rdx and Tag is on r8. We need to check for rdx.
Note that rdx is not the same as the rdx that you receive in the function, instead we pass a structure containing all the general-purpose register, you can read them or even modify them, and if you modify them, then the operating system will continue with new values in these registers.
For general-purpose registers, we pass a pointer to the following structure as the first argument on rcx.
typedef struct _GUEST_REGS
{
ULONG64 rax; // 0x00
ULONG64 rcx; // 0x08
ULONG64 rdx; // 0x10
ULONG64 rbx; // 0x18
ULONG64 rsp; // 0x20
ULONG64 rbp; // 0x28
ULONG64 rsi; // 0x30
ULONG64 rdi; // 0x38
ULONG64 r8; // 0x40
ULONG64 r9; // 0x48
ULONG64 r10; // 0x50
ULONG64 r11; // 0x58
ULONG64 r12; // 0x60
ULONG64 r13; // 0x68
ULONG64 r14; // 0x70
ULONG64 r15; // 0x78
} GUEST_REGS, *PGUEST_REGS;{% hint style="info" %} If you want to change or examine other registers like XMM registers, floating-point registers, or other registers, you can change and examine them directly. {% endhint %}
In the following example, we want to check NumberOfBytes (rdx) with 0x1000 and if the requested size is 0x1000, then the actions should be performed.
mov rbx , [rcx+0x10] ; rbx now conains the rdx of the guest [target debuggee]
cmp rbx, 0x1000 ; compare rbx with 0x1000
je ReturnTrue
xor rax,rax
jmp Return
ReturnTrue :
mov rax, 0x1
Return:
retAfter using assembler to convert the above code to hex representation of assembly, the final command will be like this :
HyperDbg> !epthook2 fffff800`4ed6f010 condition {488B59104881FB0010000074054831C0EB0748C7C001000000C3}One important note is that if you want to create a condition for !syscall command, which is common, then you should know that the syscall calling convention is fastcall (rcx, rdx, r8, r9 and stack), so if your target user-mode application is x64, then you can expect the exact arguments from user-mode to kernel-mode. Still, if your user-mode application is x86, then Windows might change some of the arguments that contain addresses to new addresses.
Now, let's run the above code by using the assembly code directly without converting them to hexadecimal by using HyperDbg's assembler:
HyperDbg> !epthook2 fffff800`4ed6f010 asm condition {
mov rbx , [rcx+0x10];
cmp rbx, 0x1000;
je ReturnTrue;
xor rax,rax;
jmp Return;
ReturnTrue:
mov rax, 0x1;
Return:
ret;
}The above code uses the internal assembler of HyperDbg.
{% hint style="danger" %} Accessing random memory in custom code and condition code in vmx root-mode is considered "unsafe". You have some limitations on accessing memory on some special events. {% endhint %}