| description |
|---|
Using Transparent-mode in HyperDbg |
Transparent-mode is an anti-anti-debugging and an anti-anti-hypervisor solution for HyperDbg.
If you enable this mode, then HyperDbg tries to make itself transparent from anti-debugging and anti-hypervisor methods and not reveal the hypervisor's presence on timing and microarchitectural attacks; however, it won't guarantee 100% transparency, but it makes it substantially harder for the anti-debugging methods.
To enable this mode, you should use '!measure' and '!hide' commands.
You can use Transparent Mode in both VMI Mode and Debugger Mode.
For testing transparent-mode, we use pafish.
Pafish is a demonstration tool that employs several techniques to detect sandboxes and analysis environments in the same way as malware families do.
If we load HyperDbg and run pafish, we see the following results:
As you can see in the above picture, HyperDbg is detected by many factors. In fact, pafish checks for the hypervisor's presence, and as HyperDbg uses a hypervisor, then it shows that a debugger is present or the environment is not safe for malware to run.
Now, we can use HyperDbg's Transparent-mode to bypass pafish.
For enabling this mode, first, we should use the '!measure' command. This command uses statistical methods to measure and provide the details for the transparent-mode of HyperDbg for defeating anti-debugging and anti-hypervisor methods.
This command should be run before we 'load' the debugger or before connecting to the debugger, and after that, we can use the '!hide' command.
HyperDbg> !measure
If we want to use the hardcoded results and statistics for a not-running hypervisor machine, we can use the following command to apply the default measurements.
HyperDbg> !measure default
After that, we should use the '!hide' command. For example, if you want to apply the transparent features to process id 2a78 we can use the following command.
HyperDbg> !hide pid 2a78
Most of the times, applications check for anti-debug methods on their very first execution stages; thus, it's not simply possible to use !hide with pid. To solve this problem, we can use the name of the process.
We want to apply to the pafish process name. pafish.exe is the name of this process. The following command is used :
HyperDbg> !hide name pafish.exe
If we recheck the result of the pafish again, we see the following results.
Transparent-mode is under active development, and on each version, we add new methods to this mode to make sure that HyperDbg is transparent. However, this mode still needs a lot of contributions.
If you think you can add new methods for transparency, don't forget to contribute or ping us on GitHub.