是否可以使用内置的esim卡

[kunger97]

手里有个没卡槽的，所以在想能否使用内置的esim卡，使用卡商的流量套餐同时使用openwrt提供的强大功能。

[dukexinaw]

这个不用的硬件不一样，内嵌eSIM 的硬件。你可以在手动刷完固件后，通过Modemmanager 命令查询
mmcli -m any 看看是否有EID

[woshichenghaibo]

忍不住专门登陆上来看看，这个功能真的是刚需，怎么都弄不出来，

永远都是正在拆卸调制解调器载体，用mmcit查看后发现 sim missing，请教怎么办

[woshichenghaibo]

这个不用的硬件不一样，内嵌eSIM 的硬件。你可以在手动刷完固件后，通过Modemmanager 命令查询 mmcli -m any 看看是否有EID

求保姆级解决办法

[woshichenghaibo]

这个不用的硬件不一样，内嵌eSIM 的硬件。你可以在手动刷完固件后，通过Modemmanager 命令查询 mmcli -m any 看看是否有EID

root@HandsomeMod:~# mmcli -m any

General | path: /org/freedesktop/ModemManager1/Modem/0
| device id: fad8ab2dc94a922d732648b8e0656bf07433d6fb

Hardware | manufacturer: 1
| model: 0
| firmware revision: UFI003_CT 20211210 1 [Nov 04 2016 02:00:00]
| carrier config: Commercial-SRLTE-SS-CT
| carrier config revision: 02011389
| h/w revision: 10000
| supported: gsm-umts, lte
| current: gsm-umts, lte
| equipment id: 860205055396356

System | device: qcom-soc
| drivers: rpmsg_chrdev, bam-dmux
| plugin: qcom-soc
| primary port: rpmsg0
| ports: rpmsg0 (qmi), rpmsg1 (at), rpmsg_ctrl2 (ignored),
| wwan0 (net), wwan1 (net), wwan2 (net), wwan3 (net), wwan4 (net),
| wwan5 (net), wwan6 (net), wwan7 (net)

Status | state: failed
| failed reason: sim-missing
| signal quality: 0% (cached)

Modes | supported: allowed: 2g; preferred: none
| allowed: 3g; preferred: none
| allowed: 4g; preferred: none
| allowed: 2g, 3g; preferred: 3g
| allowed: 2g, 3g; preferred: 2g
| allowed: 2g, 4g; preferred: 4g
| allowed: 2g, 4g; preferred: 2g
| allowed: 3g, 4g; preferred: 4g
| allowed: 3g, 4g; preferred: 3g
| allowed: 2g, 3g, 4g; preferred: 4g
| allowed: 2g, 3g, 4g; preferred: 3g
| allowed: 2g, 3g, 4g; preferred: 2g
| current: allowed: any; preferred: none

Bands | supported: egsm, dcs, pcs, g850, utran-1, utran-5, utran-8, eutran-1,
| eutran-3, eutran-5, eutran-8

IP | supported: ipv4, ipv6, ipv4v6
root@HandsomeMod:~#

[dukexinaw]

一般支持双卡，eSIM 在第二个卡槽上，是硬件贴在板子上，长得像SPI flash 芯片。你可以拆开看看。
有的话，你可以研究mmcli 切换sim2 esim 试试

[MageDelfador]

保姆来喽～

记得“默认状态”不要勾