Find-orientations not moving to next step

[JoshuaWard201]

I am running detector calibration using some ruby data. I loaded in the data, ran find orientations and then fit grains. Went through the calibration process. When I went to re-run the find-orientations it works as normal until it gets to the part where it should plot the grains. The window shows that it found the 3 ruby grains I need, but the window just stays up, with the progress bar running continuously. It will run for over an hour before I end it.

[psavery]

So it only happens when you re-run it?

That's not good...

[JoshuaWard201]

Hi Patrick, Yes, only when I re-run. For example, I have ben able to replicate it multiple times, and each time I am doing the following. I load in the data, and run a find orientations of ruby for example for calibration. Then I run fit-grains. With the fit-grains data I run through a calibration procedure for the rotation series. Then, I attempt to run the find-orientations again, and it sits there and just stalls. The progress dialog box is still running, but the window never closes to move on to the next step. The command log will display that 3 grains were found, but that is it. Best Regards, Joshua Ward Research Engineer University of Dayton Research Institute AFRL/RXNMB (Area B, Bldg. 655, Rm. 06) Air Force Research Laboratory Materials and Manufacturing Directorate Wright-Patterson Air Force Base, OH 45433-7817 ***@***.******@***.***> | ***@***.*** W: (937) 656-1703 C: (937) 546-1680 [cid:fde2a586-6496-4533-91ec-d82367fda39e] UDRI Proprietary - Unprotected

…

________________________________ From: Patrick Avery ***@***.***> Sent: Monday, October 28, 2024 7:00 PM To: HEXRD/hexrdgui ***@***.***> Cc: Ward, Joshua T ***@***.***>; Author ***@***.***> Subject: Re: [HEXRD/hexrdgui] Find-orientations not moving to next step (Issue #1743) CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe. So it only happens when you re-run it? That's not good... — Reply to this email directly, view it on GitHub [github.com]<https://urldefense.us/v2/url?u=https-3A__github.com_HEXRD_hexrdgui_issues_1743-23issuecomment-2D2442829933&d=DwMCaQ&c=pftDoUyzvDgNGToC1TC2fAYTjbKPSqv0CTWoNdikfI0&r=1N_iiBgfOcV6L9I64beum987LN-lKqKyU1sYZnZHvLg&m=xNmfSJDIs7PPoUAyfP0rwpgbee60ugIZBQF4TbNdX8cGOifC8qFFbQ6nsypcA_Ps&s=ZZDoNtvzKRjP6d9Y8QX82kh8hxjDkjm2fyOeTsmRUZk&e=>, or unsubscribe [github.com]<https://urldefense.us/v2/url?u=https-3A__github.com_notifications_unsubscribe-2Dauth_BJJFQQTNMJBFFN2AJGOIXHDZ526XZAVCNFSM6AAAAABQRD76WGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINBSHAZDSOJTGM&d=DwMCaQ&c=pftDoUyzvDgNGToC1TC2fAYTjbKPSqv0CTWoNdikfI0&r=1N_iiBgfOcV6L9I64beum987LN-lKqKyU1sYZnZHvLg&m=xNmfSJDIs7PPoUAyfP0rwpgbee60ugIZBQF4TbNdX8cGOifC8qFFbQ6nsypcA_Ps&s=vd7CODrd1NoOkAxciIP8WTDnZg5DMM0V-cetVKVcJjM&e=>. You are receiving this because you authored the thread.Message ID: ***@***.***>

________________________________ The information contained in this e-mail and any attachments from UDRI may contain confidential and/or proprietary information, and is intended only for the named recipient to whom it was originally addressed. If you are not the intended recipient, any disclosure, distribution, or copying of this e-mail or its attachments is strictly prohibited. If you have received this e-mail in error, please notify the sender immediately by return e-mail and permanently delete the e-mail and any attachments.

[psavery]

I might not be able to get to this in the next few weeks, but please remind me later if I forget! I don't think it will be a difficult fix.