Flash Endurance

[c0mplex1]

I read in the APsystems EZ1 integration in HA, that the inverter’s lifetime is shortened by excessive use (< 300 sec) of the power limit (maxpwr) setting. https://www.home-assistant.io/integrations/apsystems/#flash-endurance
Is this also the case with the YC500, YC600, YC1000, DS3, QS1 and QT2 inverters, as far as anyone knows?

[HAEdwin]

Good to know, I could put a delay on the switches to prevent this (although that might lead to questions about why the switch doesn't work after the toggle). Or build a toggle to optionally prevent the toggle (like discussed in release 2025-5) 🤣
Fun fact... did you know the EZ1 is actually a DS3 with addition of WiFi? Don't know about the firmware because the ECU-R-Pro firmware also has ECU-C options (which don't work offcourse).

[c0mplex1]

You don't have to put any effort into it. I'll solve this by a delay in HA.
I just wanted to know if the above mentioned inverters also have this problem.