screen casting jam

[JochenYang]

Hello author, I am now win11 24H2 system, why cast screen every so often picture and audio at the same time stuck dead for a few seconds, and then restore?
instruction is @echo off
scrcpy --video-codec=h265 --video-encoder=c2.qti.hevc.encoder.cq --max-size=1920 --max-fps=120 --video-bit-rate=10M --keyboard=uhid --window-title=GoAway，I've tried the default one, and it still gets stuck.
I don't know what the situation is, my bandwidth is 2000 MB should be enough, upload is also 70mbps。。。
I was hoping you could help me. ^^

[rom1v]

Try over USB. Or reduce the bit rate, or use a connection with less packet loss.

#495

[JochenYang]

Try over USB. Or reduce the bit rate, or use a connection with less packet loss.尝试通过 USB 连接。或者降低比特率，或者使用包丢失更少的连接。

#495

OK, thank you very much for your answer, but in fact, there was no such situation before. I haven't used it for a long time, so I don't know why there is such a situation. I should have no problem with the bit rate. I used to be able to adjust it to 500mpbs. I don't know if it's because of the system, but I've also reinstalled it, so it may still be the encoder problem. Is there any recommendation or do I continue to keep the default?