You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Are you using the latest EVDI version? yes 1.14.1-7
If you are using a DisplayLink device, have you checked 'troubleshooting'
on DisplayLink's website? yes
Is this issue related to evdi/kernel? dont know
Linux distribution and its version - Ubuntu 23.04
Linux kernel version - 6.2.0-33-generic
Xorg version (if used) - wayland
Desktop environment in use - GNOME
my xps 15 (with nvidia graphics card) is connected via 2 usb c cables to 2 usb c hubs which are connected to a aten cs1842 kvm switch which makes 2 monitors available to it
my issues are
monitors are sometimes running with a lower frequency (30 hz instead of 60hz) when reconnecting via usb c
monitor arrangement is not automatically detected when connecting to usb c again and i have to configure it again
(big issue) after sleep i see error messages and force me to power off the machine at least once a day
1915 0000:00:02.0: [drm] *ERROR* Link Training Unsuccessful
usb 2-2.5: PM: dom_run_callback(): usb_dev_resume+0x0/0x20 returns -5
usb 2-2.5: PM: failed to resume async: error -5
ucsi_acpi USBC000:00: failed to re-enable notifications (-110)
when checking dmesg i can also see the following errors
on DisplayLink's website? yes
my xps 15 (with nvidia graphics card) is connected via 2 usb c cables to 2 usb c hubs which are connected to a aten cs1842 kvm switch which makes 2 monitors available to it
my issues are
The text was updated successfully, but these errors were encountered: