Do not support ILI9948 touch driver is ft6236 on esp32 ? would you have a plan to add it

[sushipan]

1.Do not support ILI9948 touch driver is ft6236 on esp32 ? would you have a plan to add it?
2. IDE: PlatformIO
3. support on this repo https://github.com/DustinWatts/FT6236
4. TFT_eSPI library version "2.5.30"
5. Procesor, ESP32
6. TFT driver (e.g. ILI9948)
7. Interface type (SPI or parallel)
8. Touch Interface is i2c
9. Screen is 3.5inch_SPI_Module_MSP3520
lcdwiki : http://www.lcdwiki.com/3.5inch_SPI_Module_ILI9488_SKU:MSP3520

[Bodmer]

Capacitance and I2C bus touch controllers are not supported. You should be able to use Dustin Watts library or another one. For example there is one here.

I have created a library here for the FT5436 controller but I suspect it will not work with the FT6236

The ILI9488 is already supported.

[yel-best]

1.Do not support ILI9948 touch driver is ft6236 on esp32 ? would you have a plan to add it? 2. IDE: PlatformIO 3. support on this repo https://github.com/DustinWatts/FT6236 4. TFT_eSPI library version "2.5.30" 5. Procesor, ESP32 6. TFT driver (e.g. ILI9948) 7. Interface type (SPI or parallel) 8. Touch Interface is i2c 9. Screen is 3.5inch_SPI_Module_MSP3520 lcdwiki : http://www.lcdwiki.com/3.5inch_SPI_Module_ILI9488_SKU:MSP3520

I found that when using FT6236, there will be screen contact offset, and there is no way to click the button correctly.

Is there any solution? thanks

#include <FT6236.h>

FT6236 ts = FT6236();

static const uint16_t screenWidth = 480;
static const uint16_t screenHeight = 320;

tft.setRotation(3);

if (!ts.touched()) {
    data->state = LV_INDEV_STATE_REL;
  } else {
    data->state = LV_INDEV_STATE_PR;

    TS_Point p = ts.getPoint();
    /*Set the coordinates*/
    data->point.x = p.x;
    data->point.y = p.y;


    Serial.print("Data x ");
    Serial.println(p.x);

    Serial.print("Data y ");
    Serial.println(p.y);
  }