Pin assignments in User_Setup.h not being used #2046
Unanswered
Bwanna
asked this question in
New processor/display support or capability request
Replies: 1 comment
-
The pin choice suggests you are using an ESP32. Look at the User_Setup_Select.h file to make sure no other setup is loaded other than User_Setup.h. Other than that I have insufficient information to judge the cause. |
Beta Was this translation helpful? Give feedback.
0 replies
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
-
Hi,
I've created the following pin assignments in the User_Setup.h file:
#define TFT_MOSI 23
#define TFT_MISO 19
#define TFT_SCLK 18
#define TFT_CS 15
#define TFT_DC 2
#define TFT_RST 4
However, when I run Read_User_Setup sketch I get the following:
MOSI = GPIO 23
MISO = GPIO 19
SCK = GPIO 18
TFT_CS = GPIO 15
TFT_DC = GPIO 0
TFT_RST = GPIO 2
Maybe I'm not doing something correctly, but assistance would be greatly appreciated. I also did try and include these defines in the sketch itself without any luck.
Thanks,
Beta Was this translation helpful? Give feedback.
All reactions